|
| 1 | Demolition of cement concrete (Unreinforced) in ground floor and pavings not exc 15cm thick below or above ground level and removing debris off the premises, complete all as specified and/ or as directed by Engr-in-Charge. |
| 2 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and/ or as directed by Engr-in-Charge. |
| 3 | Material and labour for Cement concrete 1:4:8, type D-2, (using 40mm graded stone aggregate) 75 mm thick as in sub -floors, sub- bases, floors and pavings, etc. complete all as specified and/or as directed by Engr-in-Charge. |
| 4 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658- 2006 of 60 mm thickness M-35 grade, complete all as specified and/ or as directed by Engr-in-Charge. |
| 5 | Material and labour for sand filling under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and/ or as directed by Engr-in-Charge. |
| 6 | Material and labour for chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments and laid over & including 20mm thick cement screed base in cement mortar (1:6) complete all as specified and/ or as directed by Engr-in-Charge. |
| 7 | Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and/ or as directed by Engr-in-Charge. |
| 8 | Material and labour for 15 mm thick rendering in CM (1:6) on other than fair faces of brick work finished the surface even & smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 9 | Material and labour for 15 mm thick rendering in CM (1:4) on fair faces of brick work finished the surface even & smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 10 | Material and labour for 5 mm thick rendering in CM (1:3) on ceiling finished the surface even & smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 11 | Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and/ or as directed by Engr-in-Charge. |
| 12 | Preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and/or as directed by Engr-in-Charge |
| 13 | Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint complete all as specified and/ or as directed by Engr-in-Charge. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and/or directed by Engr-in-Charge. |
| 15 | Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and/or as directed by Engr-in-Charge. |
| 16 | Supply and fix MS Rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work confirming to Fe-410, Gde-E-250 complete all as specified and/ or as directed by Engr-in-Charge. |
| 17 | Demolition of precast concrete block walling, stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and/ or as directed by Engr-in-Charge. |
| 18 | Material and labour for precast solid blocks in cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in block masonry, exc.10cm in width and set in cement mortar 1:6, complete all as specified and/or as directed by Engr-in-Charge. |
| 19 | All as per item No 18 above, but except cement concrete blocks (old blocks obtained from demolition shall be reused). |
| 20 | Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 20mm thick in CM 1:6, set and jointed in neat cement slurry laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and/ or as directed by Engr-in-Charge. |
| 21 | Material and labour for Granite 20mm thick (of any type) over 15mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and/ or as directed by Engr-in-Charge. |
| 22 | Material and labour for dressed granite or trap Kerb stones roughly squared stones of size 20cm x 30 cm, so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description) complete all as specified and/ or as directed by Engr-in-Charge. |
| 23 | Supply and fix rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 250 litres including all accessories including dismantling existing tank, complete all as specified and/or directed by Engr-in-Charge. |
| 24 | Supply and fix rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories including dismantling existing tank, complete all as specified and/or directed by Engr-in-Charge. |
| 25 | Supply and fix rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories including dismantling existing tank, complete all as specified and/or directed by Engr-in-Charge. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and/ or as directed by Engr-in-Charge. |
| 27 | Material and labour for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge. |
| 28 | Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:4) as in floors etc complete all as specified and/or as directed by Engr-in-Charge.Make : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by GE |
| 29 | Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and/or as directed by Engr-in-Charge. |
| 30 | Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and/ or as directed by Engr-in-Charge. |
| 31 | Supply and fix 0.63mm thick black, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers in roofs, walls etc. with grade of zinc coating 275, complete all as specified and/ or as directed by Engr-in-Charge. |
| 32 | All as per Srl Item No 31 above, but except sheeting. |
| 33 | Supply and fix 0.63mm thick plain black mild steel sheeting as in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/ or as directed by Engr-in-Charge. |
| 35 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/ or as directed by Engr-in-Charge. |
| 36 | Supply and fix Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and/ or as directed by Engr-in-Charge. |
| 37 | Dismantling chain link fencing/expanded metal or mesh exc. 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description complete all as specified and/ or as directed by Engr-in-Charge. |
| 38 | Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire, complete all as specified and/ or as directed by Engr-in-Charge. |
| 39 | Supply only chain link MS galvanised fencing of size as directed by Engr-in-charge. |
| 40 | Excavating in post holes (or similar holes) each not exc. 0.5 cum in hard/dense soil, getting out and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and/ or as directed by Engr-in-Charge. |
| 41 | Material and labour for PCC 1:3:6 type C-2, (using 40mm graded crushed stone aggregate) as in lean conc, mass concrete, foundation filling etc, complete all as specified and/ or as directed by Engr-in-Charge. |
| 42 | Supply only Mild steel round bars as in fencing complete all as specified and/ or as directed by Engr-in-Charge. |
| 43 | Preparation of new/ previous untreated steel surface of any description not exc. 10cm grith or width, not otherwise described with one coat of red oxide zinc chrome primer followed by two coats of synthetic enamel paint complete all as specified and/ or as directed by Engr-in-Charge. |
| 44 | Material and labour for PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in mass concrete and foundation filling complete all as specified and/ or as directed by Engr-in-Charge. |
| 45 | Supply and fix angle iron with swan neck as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 complete all as specified and/ or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
