Tender For Addition Alteration To Certain Area Of Bldg No P-287 Sudarshan Chakra (Scom) Under Ge Dronachal
Tender Value
42.80 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Area Of Bldg No P-287 Sudarshan Chakra (Scom) Under Ge Dronachal
BOQ
| Sl. No. | Item Description |
| 1 | Note : It is hereby mentioned that the contractor has to ensure the proper upkeep of the existing Tile Flooring/ Cupboards/Glass Doors Etc. Contractor is supposed to make his own arrangements like POP on floors Etc or any other suitable arrangements to make sure the safety of these Items. Contractor will bear the cost of repairing cracks (Made by the workers during construction) on the existing structure. |
| 2 | Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses. |
| 3 | M & L for Vitrified tiles of Dark Shade or Digital Tiles of Gloss Finish, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 1.00 sqm but not Exc 3.00 Sqm, in floors etc with 05 mm wide spacers and filled with Epoxy Grout of Approved Make, set and jointed in neat cement slurry or screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 4 | Ditto As in Above Item but in Skirting with a Backing Coat of 10 mm thick in Cement Mortar 1:4 |
| 5 | M&L Vitrified Glazed tiles Glossy Finish or Digital Tiles Super Gloss in vertical surface Area of Wall tiles Exceeding 0.36 Sqm and not Exceeding 0.76 Sqm), 8 mm thick with 05 mm wide spacers and filled with Epoxy Grout of Approved Make, set and jointed in neat cement slurry or over 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 6 | Demolition of Brickwork or Stone Boulder Masonary, Bulit in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engnr-in-Charge |
| 7 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 8 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 9 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons or Platforms laid bedded in any type of mortar complete all as specified and as directed by Engnr-in-Charge etc. |
| 10 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 all as specified and directed. |
| 11 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 12 | Material and Labour for Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of any Dia set in cement mortar complete all as specified and as directed by Engineer-inCharge |
| 13 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls or in Floors and Trenches including clamps complete all as specified and directed. of the following bore of pipe:- |
| 14 | (a) 110mm |
| 15 | (b) 75mm |
| 16 | Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 17 | (a) 75mm |
| 18 | (b) 110mm |
| 19 | Supply & fixing PVC (SWR) PVC (SWR) vent cowl inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 20 | (a) 75mm |
| 21 | (b) 110mm |
| 22 | Supply & fixing PVC (SWR) double (double Y) equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 23 | (a) 75mm |
| 24 | (b) 110mm |
| 25 | Supply & fixing in repair PVC (SWR) pipe bend with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 26 | (a) 75mm |
| 27 | (b) 110mm |
| 28 | M & L for 75mm bore PVC (SWR) floor trap/ Multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge |
| 29 | S & F in Repair, Counter top Ceramic Wash Basin of Make Jaquar (ALS-WHT-85601) of size 705x460x195 mm or equivalent including, Suitable Waste Coupling for this make, Supply and Fix in Repair Bottle Trap of PTMT bottle traps of Dia 32 mm, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, Including PVC connections 15 mm size with PTMT nuts of length 600 mm, including waste pipe complete all as specified and as specified and as directed by Engnr-in-Charge |
| 30 | S & F in Repair, Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm 45 gms/40 mm-60 gms), Bore dia of only fixed in discharge pipe (mm) |
| 31 | S&F in repair 15 mm wash basin mixer of make Jaquar (LYR-CHR-38051B) Single Lever Basin Mixer with Popup Waste & 450mm Long Braided Hoses including all the necessary accessories required for fixing the mixer, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specified and directed by engr in charge. |
| 32 | S&F in repairs Wall Mixer 3-in-1 System of Jaquar Make CQT-CHR-23273UPR Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges Connecting Legs & Flanges (without Hand Shower but with Exposed Shower Pipe with Provision for Simultaneous Working of Showers with Operating Diverter Knob, L-Type in Round Shape 20mm dia., Size 1120X410mm with Sliding Holder for Hand Shower, Wall Bracket & 8mm dia., 0.5M Long Flexible Tube (for connection to Exposed Shower Mixer) Without Showers & Overhead Shower)15 mm wall mixer with provision for bath telephone shower and overhead shower cast copper alloy, chromium plated fancy type, with capstan head, screwed down high pressure for iron pipe etc and fixed complete all as specfied and directed. |
| 33 | S & F 15 mm nominal size, nonrising spindle type fancy wall mounting combination as per IS 8931: 1993, cast copper alloy body with knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 34 | S & F in Repair ISI marked 15mm bore stop valves/angle valve cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 35 | S & F 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 36 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC of make Jaquar and Catalogue No ACS-WHT-87953BIUFSM of colour approved by user, including Rimless Blind Installation Wall Hung WC Including UF Soft Close Slim Seat Cover, Hinges, Accessories Set (closed pattern incl all necessary accessories like rag bolts/ gel gasket Including Traps and all other accessories required for effective functioing of EWC. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 37 | Supply and Fixing in Mechanical Concealed Cistern of Suitable Capacity with Frame along with all the accessories like P Trap or S Trap Pipe, Connection Hanger, Protection Cap Adapter Sleeve Including Mechanical Push Plates of Jaquar Make Catalogue No JCP-CHR-852415 (Control Plate Alive) , Suitable Flush Pipe to connect with EWC Etc and PVC connection 450 mm long. complete all as specified and as directed by the Engineer-in-Charge |
| 38 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-inCharge |
| 39 | Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy and Chromium Plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | S&F in repir Health faucet (ABS Body) of Jaquar Make and catalogue No ALD-CHR-579, mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook Easy Flex Tube & Wall Hook with NRV (Back Flow Preventer) including making connections and fixed in position complete in all respect as specified including Health faucet fixing in pipe etc. complete all as specified and as directed. |
| 41 | S&F in repair of Toilet paper holder of Jaquar Make and Catalogue No ACN-CHR-1151N chromium plated, fixing complete all as specified and directed by engr in charge. Make: Prayag or equivalent |
| 42 | S & F in repairs Swivel shower of Jaquar Make and Catalogue No OHS-1637 Maze Overhead Shower 190X295mm Rectangular Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms including fixing to steel pipe or union complete all as specified and as directed. |
| 43 | Supply and Fix SELFY (1600 x 200 mm) Shower Panel of Jaquar Make and Catalogue No SHP-SSF-ST88158B With Anti Finger Print In Stainless Steel Body Anti-finger print stainless steel body inluding Inbuilt ABS top shower with 60 nozzles, inclding 2 Moveable ABS body massage jet, including Hand shower with flexible hose including Brass Spout inclding Shelf inclduing Thermostatic mixer with diverter 40 cm stainless steel braided hose and other accessories for effective functioning of unit for the intended purpose complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and Fix Glass Shelf of Jaquar Make Catalogue No ACN-CHR-1171N fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and as directed by Engineer in Charge. |
| 45 | S & F Aluminium Anodised Tubular towel Rack of Jaquar Make ACN-CHR-1181S, Towel Rack 600 mm Long with Lower Hangers, Stainless Steel complete all as specified and as directed by the Engineer-in-Charge |
| 46 | Supply and Fix Towel Ring of Jaquar Make ACN-CHR-1121N fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-Charge |
| 47 | Supply and Fix Double Arm Wall Mounted Reversible Plain/ Magnifying (3X) Pivotal Mirror of Jaquar Make ACN-CHR-1193N on locations as specified and as directed by Engineer-inCharge. |
| 48 | Supply and fixing for ISI marked 15 mm bore, fancy type Two way bib tap (For Health Faucet Connection) of cast copper alloy and Chromium Plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engineer-in Charge |
| 50 | Supply and Fix in repair Push tap, suitable for urinals, any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) 15 mm bore dia of pipe in, incluing wate pipe all as specified and as directed by Engineer-in-Charge |
| 51 | Supply and Fix in Repairs, Waste coupling of PTMT suitable for urinals and 32 mm bore dia of discharge pipes (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms |
| 52 | Supply and Fix in Repair, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 53 | Supply and Fix in Repair Bottle trap of Jaquar Make and Catalogue No ALD-CHR-769L300X190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange including all other anecessary accesories having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 54 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 55 | Material and Labour for Anodised aluminium snap grid frame work for false ceiling all as specified including Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge |
| 56 | S&F Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area of Window not exceeding 1.00 sqm each |
| 57 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 58 | Taking down shutters of any description area of each exc 1 sqm but n.exc 2 sqm all as specified and directed by Engr-in-Charge. |
| 59 | Taking down and refixing shutters of any description exc 1 sqm but n.exc 2 sqm all as specified and directed by Engr-in-Charge. |
| 60 | S&F 125*60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed |
| 61 | M&L for cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frame of pressed Steel and bed blocks and like etc complete all as specifed and directed |
| 62 | S & F 30 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type veneer/Mica on both sides and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete all as specified and directed. |
| 63 | S & F IInd Class HW 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, with moulded framing, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge |
| 64 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 65 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 66 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | S&F for 150 mm aluminium handles fancy type, cast type, anodised complete all as specified. |
| 68 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section, fancy type complete all as specified. |
| 69 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 70 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 71 | S&F new single action spring hinge, 125mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed. |
| 72 | Supply and Fix in Repair Veneered decorative plywood 18 mm thick and with No of Ply 07 or above, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work or with appropriate nails if fixed to the wall and Provn of Locker as directed complete all including Stainless Steel accessories like Magnet Catcher, Knobs, Handles, Pedestal or Cylindrical Type Lock complete all as specified and as directed by Engineer-in-Charge |
| 73 | Supply and Fix Hettich Sensys 8645i, 0 Crank Thick Door Hinge For Door Thickness 15 -24 mm With Mounting Plate for overlay Doors, Cupboard Doors, Modular Kitchen Cabinet, Fixed on Mounting Plates, Steel Nickel Plated, with an opening angle of 110 Degree complete all as specified and as directed by Engineer-in-Charge |
| 74 | S&F in repairs 4.8 mm thick looking mirror of approved quality with wooden back and edge bedding or to be fixed on wooden frame at desired location by the executives and fixed complete all as specified and directed. |
| 75 | S&F Sheet glass 4 mm thick exc 0.5 sqm in each pane fixed in aluminium/wooden frame using oil putty complete all as specified and directed by Engr in charge. |
| 76 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge. |
| 77 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 78 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 79 | M & L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete. |
| 80 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 81 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 20 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 82 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 83 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 25 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 84 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 85 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 86 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A. |
| 87 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 88 | Supply and Fix in Repair and Material and Labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick, Designer/Manglore Pattern of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Chajjas , fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge |
| 89 | Taking down cement plaster of any description incl Tezzao finish as in dado/ skirting of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 90 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 91 | M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (water proofing compound measured and paid seperately) |
| 92 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 93 | M&L complete removal of existing Treatment old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 94 | M&L for prepration of old ceiling surfaces , applying two coat of oil emulsion Distemper including White Cement Based Putty, all as specified and directed by Engr-in-Charge. |
| 95 | M&L for Preparation of New Plastered surfaces of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 96 | M&L for prepration of new ceiling surfaces , applying two coat of oil emulsion distemper including one coat of white cement based Putty, all as specified and directed by Engr-in-Charge. |
| 97 | Material and Labour for Preparation of New Surfaces Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm over external Surface Putty one coat complete all as specified and as directed by Engineer-in-Charge |
| 98 | Ditto as in the Item above but on old Surface including Prepartion all as specified and as directed by Engineer-in-Charge |
| 99 | Material and Labour for Preparation of New Surfaces or by complete removal of Existing Treatment and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 100 | Ditto as in the Item above but on old Surface including Prepartion all as specified and as directed by Engineer-inCharge |
| 101 | Material and Labour For Preparattion of New Surfaces or Preparation of Old Surfaces by Complete removal of existing Treatment, repairing of all surface imperfections cracks undulations and rusts etc, filling of cracks using crack filler, Applying one coat of Weathercoat Exterior Primer followed by one coat of Roller Coat of Approved Make with Trowel followed by Honey Comb Roller and finishing the surface with Two coats of External Emulsion Paint complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Material and Labour For Preparation of New Surfaces or Preparation of Old Surfaces by Complete removal of existing Treatment, repairing of all surface imperfections cracks undulations and rusts etc, filling of cracks using crack filler, Applying one coat of Weathercoat Exterior Primer followed by one coat of Rustic Coat of Approved Make with Trowel and finishing the surface with Two coats of Oil bound Distemper complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Dismantling of stainless steel railing any type and size fixed in any postion embedded in concrete etc complete all as spc and directed. |
| 104 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc or any other section as required by the executies, in Railings and in Covered Sheds of any size and height, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by the Engineer-in-Charge. |
| 105 | Supply and Fix 12 mm thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long and other connecting items necessary for proper functioning of door complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and Fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 107 | Removal and Refixing in same opening or any other opening, of any Shape and any Size 12 mm (or any other thickness) thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long and other connecting items necessary for proper functioning of door/ Opening complete all as specified and as directed by Engineer-in-Charge. |
| 108 | Supply and Fix 52mm thick PVC Partition consisting of 12mm thick both side prelam PVC plastic ply sheet and 5mm thick prelam heat moulded 'C channel reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and as directed by Engineer-inCharge |
| 109 | Supply and Fix in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, Frames, Parttions, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 110 | Demolition of lime concrete/Cement Concrete of any description and in any position complete all as specified and directed. |
| 111 | Roughnening Surfaces of old Concrete floor by Picking, sweeping, cleaningand washing down with water to remove dust etc. |
| 112 | Brushing Neat Cement Slurry with 3.0 Kg Per Sqm |
| 113 | M&L 10 mm thick rendering in CM 1:4 in sunken Portion on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % weight of cement |
| 114 | M & L PCC (1:2:4) type B-0, 50 mm thick (Avg Thickness) using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement (WPC will be measured separately) |
| 115 | M & L PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement as in coving(WPC will be measured separately) |
| 116 | M&L for Cement concrete (1:5:10) in foundations, filling of sunken and mass-concrete etc including complete all as specified and directed |
| 117 | Applying only a coat of Bituminuous Primer @ 200 ml per sqm on concrete surfaces |
| 118 | Supply only Bitumen primer for use in waterproofing and damp-proofing treatments complete all as specified and as directed |
| 119 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces in sunken portion, complete all as specified and as directed |
| 120 | Supply and Fix 32 mm GI Pipe medium Grade as in spout n.exc. 1.00 Rm Each (in short Length) |
| 121 | M&L 40 mm thick rendering in CM 1:4 in sunken portion above PCC on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % by weight of cement |
| 122 | Material and labour for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 123 | Supply & fixing rubber moulded decorative designed coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 124 | Material and labour for sand filling under floor or in foundation including watering and consolidation completed all as specified (Note:- Sand cushion layer consolidated thickness is 20 mm below precast interlocking paver block complete all as specified and directed. |
| 125 | Supply and bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers of suitable size fixed near Washbasin Area complete all as specified and as directed By Engnr-in Charge. |
| 126 | Dismantling of old broken water storage tank cap exc or equalling 500 ltrs and n exc 1000 ltrs complete all as specified and directed |
| 127 | S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed |
| 128 | S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed |
| 129 | Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in Charge for following capacity including writing with oil paint the date of cleaning on tank ; |
| 130 | (a) Exc 250 Ltrs but not exc 500 Ltrs |
| 131 | (b) Exc 500 Ltrs but not exc 1000 Ltrs |
| 132 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc complete all as directed by EIC. |
| 133 | Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed by EIC. |
| 134 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 135 | Taking down old u/s light fitting, Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 136 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray/white colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed by EIC. |
| 137 | One light/Ceiling fan/Exhaust fan point controlled by one switch. |
| 138 | One 3 pin socket outlet on same board. |
| 139 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 140 | -ditto- as above item No 124.03 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 141 | -ditto- as above item No 124.03 but copper conductor 4 sqmm. |
| 142 | S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 143 | S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 144 | S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 145 | S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by EIC. |
| 146 | S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 16 Amp.(A/C Box) complete all as specified and directed by EIC. Make:- Indoasian, Havells, C&S |
| 147 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by EIC. |
| 148 | Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed by EIC. |
| 149 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all specified and directed by EIC.Make:- Crompton, Havells, Bajaj |
| 150 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC.Make:- Crompton, Havells, Bajaj |
| 151 | S & F in replacement Recess/surface mounting as suitable in existing fitting ultra slim 15 W LED downlighter edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed by EIC.Make:- Crompton, Havells, Bajaj |
| 152 | Supplying, installing, testing & commissioning, storage water heater (geyser), 25 litres capacity, as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 3 years on heating element and 2 years on other spares parts comprising following fittings and 2 year product warranty with temerature control knob (a) glass coated incoloy element (b) capillary type thermostat (c) Pressure saftey valve (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) magnesium anode rod cathodic protection (h) flexible cable of suitable length with 3-pin plug of 16 A capacity (i) drain plug (j) fusible plug fitted on the crown of water heater with max temprature 75 and 8 bar pressure including fixing by grouting and fastener complete all as specified and as directed by EIC. Make:- Crompton, Havells, Bajaj |
| 153 | S&F decorative type wall mounted luminaire with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base, complete all as directed by EIC.Make:- Crompton, Havells, Bajaj |
| 154 | S & F in repair Ceiling rose, 3 terminal /PVC / polycarbonate, isolated body complete all as specified and directed by EIC |
| 155 | Supplying laying in trenches and fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing LT Cross Linked Polythene Insulated(XLPE insulated) galvanized steel strip armored electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC, of cross sectional area including cable glands made out of finned brass double compression type of size 35 sqmm 3.5 Core. Note :- Excavation/road cutting, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately. |
| 156 | M & L for sub main wiring with two run of 10 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit of required size complete all as directed by EIC. |
| 157 | M & L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit of required size complete all as directed by EIC. |
| 158 | S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp, 25 KA, 4P MCCB (Ics=100% Icu) as incomer (Vertical type double door,100 Amps MCCB rate inclusive) 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCB's as outgoings complete all as specified and directed by EIC.Make:- Indoasian, Havells, C&S Note: - Contractor must provides IP43 certificate. |
| 159 | S&F in replacement of SPN DB 12 way with 200 Amp rated bus bar, IP 43, acrylic double door complete all as directed by EIC.Make:- Indoasian, Havells, C&S Note: - Contractor must provides IP43 certificate. |
| 160 | S&F amp rating 240V 10 KA'B' curve MCB SPN 40 A current carrying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC.Make:- Indoasian, Havells, C&S |
| 161 | S & F in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for wires complete all as directed by EIC. Make:- Indoasian, Havells, C&S |
| 162 | Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, with precast PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender