|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 2 | Providing and applying white cement based putty of average thickness 1 mm (One milimetres), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeand as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 3 | Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams (Fifty grams)/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 4 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelev millimetres) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg (Three point three kilograms) per sqm including pointing in white cement mixed with pigment of matching shade complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 5 | Providing and fixing 6 mm (Six millimetres) thick Cement fiber board as per IS: 14862 plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. (frame work to be paid seperatately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 7 | Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen millimetres) C.P. brass pillar taps, 32 mm (Thirty two millimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm )five hundred fifty into four hundred millimetres) with a pair of 15 mm (Fifteen millimetres) C.P. brass pillar taps complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 8 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 9 | Providing and fixing 10 litre (Ten litres) capacity - Whites P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 10 | Providing and fixing 510x1040 mm (Five hundred ten into one thousand forty millimetres) bowl depth 225 Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm(Forty millimetres), including painting of fittings and brackets, cutting and making good the walls wherever required complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 11 | Providing and fixing 20 mm (Twenty millimetres) nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m (One metres) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 12 | Providing and fixing 15 mm (Fifteen millimetres) nominal bore uplasticised PVC connection pipe with brass unions :45 cm (Forty five centimetres) length complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 13 | Providing and fixing Flexible pipe 40 mm (Forty miilimetres) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 14 | Providing and fixing 600x450mmm (Six hundred into four hundred fifty millimetres) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 15 | Providing and fixing 15 mm (Fifteen millimetres) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. |
| 16 | Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals. Please Enable Macros to View BoQ information |
