Tender For Provision Of Shed For The R Club Backside Stage, Kitchen In Vanasthali Garden And Extension Of Gym, At Hwpk Housing Colony.
Tender Value
57.86 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
0 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chittorgarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Shed For The R Club Backside Stage, Kitchen In Vanasthali Garden And Extension Of Gym, At Hwpk Housing Colony.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Excavation in all type of soil, Soft and ordinary rock etc. by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) bailing out of water if encountered over areas including refilling around foundation, plinth,in layers, watering, consolidating and disposing of all surplus excavated/broken materials upto a lead of 2km and lift of 1.5 meter, disposed earth to be levelled and neatly dressed all as per drawing, specifications and as directed by the Engineer-In-Charge. |
| 2 | Dismantling of Kota Stone/ red stone flooring of 40mm thick including stacking of useful materials and disposal of unserviceable materials within 500m lead and as directed by EIC. |
| 3 | Demolishing cement concrete/ terrazzo flooring of any mix manually/ by mechanical means including cutting of floor to the surrounding by tile cutter machine, disposal of material within 2 Km lead as per direction of Engineer - in - charge. |
| 4 | Providing and laying in position Cement concrete 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate of 20mm maximum size) including consolidation, finishing, curing etc. including the cost of form work, shuttering, centering complete as per specifications and as directed by the Engineer. |
| 5 | Providing and laying in position Reinforced cement concrete 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) including manufactured sand : 3 graded stone aggregate 20 mm nominal size) including consolidation, finishing, curing etc. complete as per specifications (but excluding excluding the cost Form work shuttering, centering, cost of steel reinforcement) complete as per the specification and as directed by the Engineer. |
| 6 | Providing & laying TMT Reinforcement Steel bar of grade of Fe 500D or more for reinforced cement concrete at all levels including supplying, preparation of barbending schedules, cutting, bending, transporting, fixing, tieing in position with G.I binding wire, all labourcharges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor using TMT bars of specified grades of all sizes. |
| 7 | providing fixing Centering and shuttering including strutting, propping etc. and removal of form work for column footing, beam etc height upto 4mtr all complete as per direction of EIC. |
| 8 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 9 | Soling work with dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete as per the specification and as directed by the Engineer. |
| 10 | Providing and laying in position Cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm maximum size) including consolidation, finishing, curing etc. complete as per specifications including the cost Form work shuttering, centering, (but excluding cost of steel reinforcement) complete as per the specification and as directed by the Engineer. |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 Cement:4 Coarse Sand) in superstructure above plinth level up to floor V level in all shapes, sizes required slope, including providing necessary scaffolding, curing etc. complete as per the specifications and as directed by EIC. |
| 12 | Plastering with 15 mm cement plaster in 1:4 mix (1 cement: 4 fine sand) at all heights including providing scaffolding, curing etc. complete as per specifications and as directed by Engineer in charge. |
| 13 | Kota stone slab flooring with 25 mm thick Kota stone over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) etc. complete all as per the specifications and as directed by EIC. |
| 14 | Providing all tools, tackles, materials, manpower for structural steel work in built up sections at all height, including cost of cutting, welding, hoisting, fixing, transport, loading, unloading, necessary scaffolding and applying a priming coat of approved steel primer all complete etc., all complete as per the specification and as directed by the Engineer in charge. |
| 15 | Applying a coat of cement primer of interior grade as per manufacturer’s specifications etc. and as directred by the Engineer. |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, Birla white wall care putty over the plastered wall surface to prepare the surface even and smooth complete including applying additional coats wherever required to achieve evensurface, including preparing surfaces, scaffolding & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge. |
| 17 | Painting with 1st quality acrylic emulsion paint interior gade of (ready mixed) of approved brand,manufacturer of required shade and colour two or more coats including applying additional coats wherever required to achieve even shade and colour,Two or more coats on new work or including prepartion of surface, filling the unever surfaces with J K or eqivailant make wall putty, sand papering, making the surface smooth and even etc. complete as per manufacturer’s specification, cleaning of paint splashings and droppings from floors, doors & windows etc. complete and as directred by the Engineer. |
| 18 | Painting Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (ready mixed) of approved brand,manufacturer of required shade and colour New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm),filling the unever surfaces with J K or eqivailant make wall putty, sand papering, making the surface smooth and even etc. complete as per manufacturer’s specification, cleaning of paint splashings and droppings from floors, doors & windows etc. complete and as directred by the Engineer. |
| 19 | Painting on steel/wood work/ plastered/ concrete surface with two or more coats of synthetic enamel paint using 1st quality synthetic enamel paint of Asian Paints or equivalent including applying additional coats wherever required to achieve even shade and colour over a coat of suitable primer, including preparing surfaces, providing & applying primer, scaffolding, filling with putty wherever required & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge. |
| 20 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 21 | Providing all tools, tackles, manpower, materials, equipment, machinery for Providing and fixing Powder coated Aluminium work (minimum thickness of powder coating 50 micron) for partitions, doors, windows and ventilators with extruded built up standard tubular section/ appropriate z-sections and other sections of approved make conforming to IS 733 & 1285, fixing with dash fasteners of required dia and size including filling up the gaps at junctions, i.e. at top , bottom and sides with required EPDM rubber/Neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitered and jointed mechanically where ever required using cleat angle etc. including providing and fixing hinges/ pivots, aluminium fittings like door handles, aldrops, tower bolts, making provision for locking arrangements wherever required, Aluminium snap beading for glazing/panelling the including cost of CP brass/ stainless steel screws, After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality etc as per drawings, specification and as directed by the Engineer. (Glazing and panelling to be paid separately) |
| 22 | Providing and fixing Glazing in aluminium door, window, ventilator shutters and partitions etc. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) by EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item) |
| 23 | Providing and fixing fly proof SS 304 wire mesh in aluminium door, window, ventilator shutters and partitions etc. with wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm by EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item) |
| 24 | Providing and fixing single point Push Button operated Locking Handle made up of aluminium alloy with powder coated approved shade for sliding window lock for aluminum sliding series including providing all required accessories required for fixing of lock etc. complete as per the specifications and as directed by EIC. |
| 25 | Providing and fixing 6 mm thick textured/plain designer cement bonded particle board false ceiling like Bison designer board or equivalant at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction.including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of cement bonded particle board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, manufacturer's specification, specifications and direction of the Engineer in Charge.(Minimum size of Designer board shall be 8'x4') |
| 26 | Providing and fixing colour coated corrugated galvalume profile sheets of TATA/JSW or equivalant make (Profile, Colour and shape as approved by the Engineer-incharge) of 0.60mm (TCT) total coated thickness (tolerance as per relevant IS code) with material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition : 55% aluminium, 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20- 25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws with EPDM seal and washers of make- Coroshield/ durotuff / polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers including cutting to size and shape wherever required, wall sides finished with non-shrink cement plaster/ silicon glue or tarfelt sheet wherever required to ensure leak proof arrangement etc. complete as per the specifications and as directed by EIC.Note:1. All screw should be sealed with silicon sealant.2. Measurements will be given only for covered Roof area and over laps will not be measured or paid separately. |
| 27 | Providing ridges or hips of width 60 cm overall width plain Galvalume steel sheet 0.63 mm thick with zinc coating not less than 275 gm/m² including fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per the specifications and as directed by EIC. |
| 28 | Providing and fixing Steel weld mesh fencing of required width in mesh size 25x25 mm made of ms wire of dia 2.5-3 mm including cutting, strengthening by welding or nuts, bolts and washers with frame ss required complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender