|
| 1 | Earth work in excavation by mechnical means(Hydraulic excavator) /manual means in foundation trenches or drain(not exceeding 1.5 m in width or 10.0 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. |
| 2 | Brick work with common brunt clay F.P.S (non modular) bricks of class designation -7.5 in superstructure above plinth level in all shapes and sizes with cement mortar 1:4 (1 cement : 4 coarse sand)as per the direction of Engineer-In-Charge. |
| 3 | Centering & shuttering including strutting, propping etc, and removal of from work for Retaining wall, return walls, walls(any thickness) in cluding attached pilasters, buttresses, plinth and string courses fillets,kerbs and steps. |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Providing & Laying Vitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption 's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 Cement : 3 Coarse sand) including grouting the joints with white cement & matching pigments etc, complete. size of tile 600x600 mm. |
| 6 | Providing & laying polished Granite flooring in required design and pattersn in linear as well as curilinear portions of the building all complete as per the architectural drawing with 18mm thick stone slab over 20mm(average) thick base of cement mortar 1:4(1cement:4coarse sand) laid and joined with cement sulrry and pointing with white cement sulrry admixed with pigment of matching shade including rubbing, curing and polishing etc, all complete specified and as directed by Engineer-in-Charge. Polished granite stone slab jet black, cherry red, elite brown, adhunic brown, cat eyes or equivalent. |
| 7 | Providing & fixing Kota stone flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 25 mm thick. |
| 8 | Providing and fixing 10 mm thick acid proof and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). |
| 9 | Acid proof tile In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile. |
| 10 | 15 mm Cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement : 4 sand). |
| 11 | 20 mm Cement plaster of mix. 1:4 (1 cement : 4 sand. |
| 12 | 20mm thick Cement plaster 1:3 C.M. (1 cement : 3 fine sand) on all ready constructed RCC wall/ Structures with floating coat of neat cement. |
| 13 | Mild steel & iron work welded in builtup section In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works with one coat of approved primers. |
| 14 | Providing and fixing hand rail of approved size by welding etc. to steel ladder, railing, balcony railing, staircase railing and similar works(up to 300 mm dia), including applying priming coat of approved steel primer, MS tube pipe. |
| 15 | Providing and fixing hand rail of approved size by welding etc. to steel ladder, railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer, G.I.Pipe. |
| 16 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unservicea- ble material within 50 metres lead as per direction of Engineer-in-charge. |
| 17 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 18 | Neat cement punning on concrete structure D/S Of Dam and other structure. |
| 19 | R.R.Stone masonry 1:6 cement mortar (1 part cement & 6 part sand) including all materials, labours& T&P,as per the direction of Engineer-in Charge. |
| 20 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete,on concrete surface. |
| 21 | Distempering with 1st quality acrylic distempe of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. |
| 22 | Finishing walls with water proofing cement paint of required shade. |
| 23 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade. |
| 24 | Painting with aluminium paint of approved brand and manufacture to give an even shade. |
| 25 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete, on old steel structure. |
| 26 | Finishing walls with textured exterior paint of required shade, New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. |
| 27 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. |
| 28 | Applying priming coat, With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 31 | Finishing walls with textured exterior paint of required shade, Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 32 | Painting with synthetic enamel paint of approved brand and manufacturar to give an even shade - two or more coats on new works. |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)-With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). |
| 35 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 36 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc,complete. |
| 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. (150x10) |
| 38 | Providing and fixing chromium plated brass handles with necessary screws (125 mm) etc. complete. |
| 39 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete size 300x16 mm. |
| 40 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 41 | Providing and fixing bright finished brass butt hinges with necessary screws etc, complete size- 125x85x5.5 mm heavy type. |
| 42 | Providing and fixing stainless steel (grade 304) railing/gate made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature(where required) and fitting the same with necessary sainless steel nuts and bolts complete i/c fixing the railing necessary accessaries & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or side of waist slab sutaible arrangement as per approval of Engineer-In-Charge. |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. |
| 44 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - Orissa pattern W.C. pan of size 580x440 mm. |
| 45 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 46 | Providing and fixing wash basin (630x450 mm size)with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. |
| 47 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity-White. |
| 48 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(15 mm nominal bore) |
| 49 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. |
| 50 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. (15 mm nominal bore) |
| 51 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape(size 453x357 mm). |
| 52 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with Total = length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 53 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in- charge. |
| 54 | 12/16 (16 mm OD) pipe |
| 55 | 16/20 (20 mm OD) pipe |
| 56 | 20/25 (25 mm OD) pipe |
| 57 | 25/32 (32mm OD) Pipe |
| 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( for External works). |
| 59 | 80 mm nominal inner dia Pipes |
| 60 | 100 mm nominal inner dia Pipes |
| 61 | 150 mm nominal inner dia Pipes |
| 62 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcem-ent, all complete as per direction of Engineer-In-Charge. |
| 63 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS:164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. |
| 64 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 65 | Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. |
| 66 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronicall welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 67 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 68 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710. |
| 69 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick Fixing with hinges of required size and necessary screws. |
| 70 | Pumping out water caused by springs, tidal or river seepage , rain seepage, broken water mains or drains and the like. |
| 71 | Supplying and fixing 10 Gauge weld mesh of size 100 mm x100 mm for floor/ roof slab concrete screed over the micro beams as reinforcement. The weld mesh shall be fixed as per drawing or as per the direction of E-I.C. |
| 72 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm dia. |
| 73 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia. |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler, 75 mm. |
| 75 | Coupler, 100 mm dia |
| 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler, 75 mm dia. |
| 77 | Single pushfit Coupler 110 mm dia |
| 78 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door, 75x75x75 mm . |
| 79 | Single Tee with door 110x110x110 mm dia |
| 80 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door, 75x75x75 mm. |
| 81 | Single Tee without door 110x110x110 mm dia. |
| 82 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°& 75 mm dia. |
| 83 | Bend 87.5° & 110 mm dia. |
| 84 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified. |
| 85 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat. |
| 86 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, Old work (one or more coats). |
| 87 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, One coat . |
| 88 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, Two coats. |
| 89 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete work. |
| 90 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 91 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Old work (one or more coats) |
| 92 | Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. |
| 93 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 94 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or more coats on old work. |
| 95 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 96 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 97 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 98 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 99 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 coarse sand). |
| 100 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 101 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping area ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 102 | Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). |
| 103 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 104 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Firerating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratoryapproved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately). |
| 105 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in- Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. |
| 106 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters, (80x1.25 mm M.S. laths with 1.25 mm thick top cover) (DSR Item No. 10.6.1). |
| 107 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover for Rolling shutter (DSR Item No. 10.6.2) |
| 108 | Providing and fixing ball bearing for rolling shutters (DSR Item No. 10.7). |
| 109 | Extra for providing mechanical device chain and crank operation for operating rolling shutters, Exceeding 16.80 sqm in the area (DSR Item No. 10.8.2). |
| 110 | Dry boulder stone pitching/dry wall in RR stone masonry work in wall above Power House slope R/B area etc. |
| 111 | Supply & Laying of Geo jute with planting seeds/plants on slope surface at R/B & L/B area near Rotec camp on dump muck pile and slope. |
| 112 | Providing & Laying shotcrete on rock surface at L/B Dam area & R/B area above Power House. |
| 113 | Supplying, Laying & spreading of stone Agrregate(20-40 mm size)at pit below Generator Trasformer at EL 570.0M, Power House roof,KHEP with removal of existing aggregate (old aggregate) if any. |
| 114 | Supply and fixing of wall cladding system consisting of 1220mm x 5000mm x 4mm thick PVDF color coated aluminium composite insulated panels with wall bracket/C channel or RHS/SHS frame work/fasteners to require RCC side walls/partition brick walls surface duly aligned,line and levelled. |
| 115 | Supply & fixing 3mm thick 600x600 mm aluminium composite panel-PVDF colour coated false ceiling system with designed perforation hook on ceiling system of metal panels supported by a special concealed steel suspension system. The hooked laid on aluminium composite false ceiling metal panels are manufactured of 3mm thick composite material in combination with 0.25mm thick aluminium coil-top & bottom layer sandwiched in between with polyethelene insulation material with PVDF colour coated finish. |
| 116 | Supply and fixing of LUXALON QUARDROCLAD-internal wall cladding system with fully concealed heavy duty adjustable system, special lock clips, hook on galvanized steel system support on extra system and supporting fixing accessories complete on the all internal wall in machine hall. |
| 117 | Supply and fixing of LUXALON-300 C perforated Aluminium false ceiling system in cotton-white color with 2mm diameter/5mm c/c non-woven textile with Aluminium carrier hanginging system suporting,fixing between the beam in machine hall roof complete work. |
| 118 | Supply and fixing of LUXALON-300C un-perforated Aluminium false ceiling system(with clip in system) in beige color with Aluminium carrier hanginging system suporting, fixing underneath the roof on 3 sides round the beam (supported on the roof) in machine hall roof complete work. |
| 119 | Providing & Fixing 5 mm thick translucent white acrylic sheet in ceiling of UCB at Power House with complete work(frame work to be paid seperatately). |
| 120 | Cement Grouting work in Dam Galleries & Power House area with Grout Pump & required pressure as per the direction of Engineer-In-Charge with proper completion of work. |
| 121 | Supply and application of epoxy mortar with one primer coat and two seal coats including cost of all material, labour, T&P etc. complete in all respects, in cracks/ honey comb area in Power House & Dam, as per the direction of Engineer-In-Charge. |
| 122 | Providing and grouting low viscous surface/under water setting epoxy grout sikadur 53 UF through prefix nozzle and grouting with grouting equipment for concrete repairs works. |
| 123 | Repairing the damage/spalled/honeycomb/cracks/joints area of concrete surface using suitable epoxy putty Sikagard 694 FI including preparation of surface suitably to receive the epoxy putty inclusive of manpower, material and euipment for concrete repairs works. |
| 124 | Drilling holes for cement grouting in underground/ surface works including cost of all material, labour, T&P etc. complete in all respects. |
| 125 | Flushing/cleaning of drainage/instrumentation hole including cost of all material, labour, T&P etc. complete in all respects. |
| 126 | Supply & Fixing of self supporting insulated partition wall work consisting of insulated panels made out of 0.5mm TCT off-white colour coated - SMP internal & external plain liner steel sheet sandwich in between 150mm thick insulation material having male female type fixing arrangement for supporting the panels to each other with necessary angle flashing arrangement complete. |
| 127 | Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agregate 20/40 mm nomonal size). |
| 128 | Providing & laying in position machine batched and machine mixed design M-30 cement concrete for RCC work using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost centring & shuttering, finishing and reinforcement, including admixtures in recommennded proportions as per IS 9103 to accelerate retard setting of concrete, improve workability with out impairing strength and durability as per direction of E-i-C.( cement content considered in this item is @340.0 Kg/Cum excess/less cement used as per design mix is payable/recoverable separately) 20 mm nomonal size). |
| 129 | Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering- All work up to plinth level 1:1.5:3(1 cement: 1.5 coarse sand : 3 graded stone agregate 20 mm nomonal size). |
| 130 | Supply & placing in position of G.I.double twisted hexagonal GABIONS at site , including all material, labour, T&P and required for proper completion of work and as per the direction of Engineer-in Charge (Gabions shall be conforming to IS:16014) |
| 131 | Supplying and Filling of river boulders in Gabions including all labours, materials & T&P and proper completion of work & tying the all open edge with galvanized wire tention rod. (Gabions shall beseparate item). |
| 132 | Reaming of existing vertical/inclined drainage holes/Formed drain 76 MM dia(NX Size hole) in dam galleries of KHEP EL 576.50 M, EL 546.00 M & EL 523.00 M by suitable reaming method from galleries floors( upward/downward) including all labours, materials & T&P and proper completion of work. |
| 133 | Providinf & injecting PU grout two components using crystalline admixtures with viscosity 100 centipoise to 400 centipose and reaction time 10-15 seconds with the accelator.The grout through the packer by using capacity of grout pump 10 BAR. |
| 134 | NOTE: Please Enable Macros to View BoQ information |
