|
| 1 | Supply, Installation, testing and commissioning of 11 KV, 26.3 kA 3 sec rated HV Switch Boards with following feeders including supply of indoor draw out type metal enclosed switchboards with copper bus bar incorporating vacuum circuit breakers complete with feeder differential CTs (including loose supply of matching diff. CT for upstream switchboard),adaptor panel (if required), PTs, multi function meters (MFM), metering & numerical relays with feeders and all other accessories like earthling truck etc., spares, product catalogues as per datasheet, tender Specification, codes and standards attached or referred, approved drawings and directions of Engineer-in- Charge, including transportation, labour and materials complete in all respects. Feeder details as follows i)12 KV, 1250A, 26.3 kA for 3 sec Incomer--2Nos ii) Line PT--2Nos, iii) Bus PT--2Nos, iv) 12 KV, 1250A, 26.3 kA Bus coupler--1No v)12 kV,1250A, 26.3 KA, 3 sec outgoing feeders-14 Nos. vi) Bus Side, Cable Side Earthling Truck with all accessories for switchboard specified -- 2 Nos. |
| 2 | Supply |
| 3 | Installation |
| 4 | Supply, Installation, testing and commissioning of 11 KV, 26.3 KA, 3 sec rated HV Isolating breaker panel with provision for termination of incoming and outgoing cables including supply of indoor drawout type metal enclosed switchboards with copper bus bar incorporating vacuum circuit breaker, line PT, complete with CTs ,PTs, multi function meters (MFM), metering & numerical relays and all other accessories etc., spares, product catalogues as per datasheet, tender Specification, codes and standards attached or referred, approved drawings and directions of Engineer-in- Charge, including transportation, labour and materials complete in all respects. |
| 5 | Supply |
| 6 | Installation |
| 7 | Supply, Installation, testing and commissioning of 11/0.433kV, with off circuit tap changer ±5% @2.5% copper wound distribution transformers with cable termination on HV side and bus duct termination on LV side including supply of all mandatory spares, including first fill of consumables, erection material, documentation, commissioning spares, tools and tackles of following ratings complete with all accessories, as per datasheet, approved drawings,specifications of this tender and othercodes and standards attached or referred. This includes transportation, including all labour and materials required specifications of this tender and directions of Engineer-in-Charge, complete in all respect. |
| 8 | 2500kVA Dry type indoor transformers with %Z=8% (Tolerance: -0% to +10%) ONAN conforming to relevant parts of IS 2026 & latest amendments and losses as per ECBC |
| 9 | Supply |
| 10 | Installation |
| 11 | 2000kVA Dry type indoor transformers with %Z=6.25% (Tolerance: -0% to +10%) ONAN conforming to relevant parts of IS 2026 & latest amendments and losses as per ECBC |
| 12 | Supply |
| 13 | Installation |
| 14 | LT Bus Ducts |
| 15 | Supply, Installation, testing and commissioning of 415V, 4000A, 65kA(1sec), copper conductor, Sandwich type Bus duct complete suitable for indoor with all horizontal and vertical bends, copper flexible, expansion joints (if required), phase transposition (if required), offset elbows, gaskets, canopy for outdoor units, external earth strips, structural supports includingfoundation / Vertical Supports from Walls or Beams complete in all respects. as required including transportation, breaking of walls and making good of the same incl all labour and materials,as per approved drawings, datasheets, tender specifications and directions of Engineer in charge |
| 16 | Supply |
| 17 | Installation |
| 18 | Switchboard end termination with all accessories such as copper flexible, matching flanges, gaskets, nuts, bolts etc. |
| 19 | Supply |
| 20 | Installation |
| 21 | Transformer end termination with all accessories such as copper flexible, matching flanges, gaskets, nuts, bolts etc |
| 22 | Supply |
| 23 | Installation |
| 24 | Supply, Installation, testing and commissioning of 415V, 3200A, 50kA(1sec), copper conductor, Sandwich type Bus duct suitable for indoor with all horizontal and vertical bends, copper flexible, phase transposition (if required), expansion joints (if required), offset elbows, gaskets, canopy for outdoor units ,external earth strips , structural supports includingfoundation/Vertical Supports from Walls or Beams complete in all respects. as required including transportation, breaking of walls and making good of the same incl all labour and materials,as per approved drawings, datasheets, tender specifications and directions of Engineer in charge |
| 25 | Supply |
| 26 | Installation |
| 27 | Switchboard end termination with all accessories such as copper flexible, matching flanges, gaskets, nuts, bolts etc. |
| 28 | Supply |
| 29 | Installation |
| 30 | Transformer end termination with all accessories such as copper flexible, matching flanges, gaskets, nuts, bolts etc |
| 31 | Supply |
| 32 | Installation |
| 33 | LT PCC panels |
| 34 | Supply, Installation, testing and commissioning of 415V, 4000A, 65kA totally type tested PCC panel with copper bus bars of internal arc withstand rating of 65 kA for 0.3 sec as per IEC 61439 and IEC 61641. Panel shall be TPN, with ACB feeders, indoor type metal enclosed with following feeders complete with multi function meters, metering and numerical relays, CTs, PTs etc. including supply of all spares, product catalogues as per datasheet, technical specifications, other codes and standards attached or referred, including transport, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, complete in allrespects. Feeder detail: Incomers-4000A- 3 Nos, Bus Couplers-4000A- 2 Nos., Outgoing feeders- 1600A - 2 Nos., 1250A - 3 Nos, 1000A-13 Nos.(all with Neutral CTs for E/F ) |
| 35 | Supply |
| 36 | Installation |
| 37 | Supply, Installation, testing and commissioning of 415V, 3200A, 50kA totally type tested PCC panel with aluminium bus bars of internal arc withstand rating of 50 kA for 0.3 sec as per IEC 61439 and IEC 61641. Panel shall be TPN, with ACB feeders, indoor type metal enclosed with following feeders complete with multi function meters, metering and numerical relays, CTs, PTs etc. including supply of all spares, product catalogues as per datasheet, technical specifications, other codes and standards attached or referred, including transport, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, complete in allrespects. Feeder detail: Incomers-3200A- 1 No., Bus Couplers-3200A- 1 No., Outgoing feeders- 1250A - 2 Nos., 1000A - 2 Nos, (all with Neutral CTs for E/F ) |
| 38 | Supply |
| 39 | Installation |
| 40 | HV cables and accessories |
| 41 | Supply & Laying of 11kV (E) grade 3CX240 sq.mm A2XWY cable with Al conductor, extruded XLPE insulated, extruded PVC ST2 sheathed, round wire armoured, PVC overall ST2 sheathed, FRLS cables of following sizes with both conductor screening and insulation screening cable underground /on the walls/ existing trenches / existing trays/ existing pipes including supply and installation of cable tags, clamps, bolt nuts, etc. transportation of cable from store/ yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications and instructions of Engineer - In - Charge |
| 42 | Supply |
| 43 | Laying |
| 44 | Diversion of existing 11 kV (E) grade, 3 C x 120 to 240 sq. mm, A2XWY, Al Conductor, extruded XLPE insulated and armoured FRLS cables with PVC ST2 type inner and outer sheaths as per specification and data sheets of this tender and directions of Engineer-in-Charge.(includes removal of installed cable and relaying of same length of cable) |
| 45 | Supply & Making of Indoor type end terminations for 11kV grade, 3Core 240 sq.mm XLPE insulated & PVC ST2 inner and outer sheathed round wire armoured aluminum conductor cables with heat shrinkable end termination kit with with copper crimping type lugs and all other accessories as required for completion of end termination in all respects for the following sizes of cables |
| 46 | Supply |
| 47 | Installation |
| 48 | Supply and Installation of heat shrinkable Cable joint Kits Straight through type with copper crimping type lugs and all other accessories suitable for 11 kV grade , 3Core 240 sq.mm XLPE insulated & PVC ST2 inner and outer sheathed round wire armoured aluminum conductor FRLS cables of following sizes |
| 49 | Supply |
| 50 | Installation |
| 51 | Supply, Installation, testing and commissioning of 110V 220AH Ni Cd battery bank and accessories. Accessories of battery bank includes inter cell-connectors, inter-tier connecting cables,lugs, battery rack, terminal strips, insulation shrouds, vent caps. This includes supply of all special tools and tackles, supply of spares, filling with electrolyte, grouting, assembly of battery racks, fixing of inter-cell connectors and inter-tier connectors etc., to complete the installation of battery bank including Supply, Installation, testing and commissioning of 110V, 60 A (min) dual FCBC battery charger with cell booster and 2 Nos. of DCDBs, each rated as indicated here 110V, 63A DCDB with incomer of 63A MCB and outgoing of 6 Nos. of 32 A MCB feeders, 4 no. of 16 A MCB feeders, other DCDB rated for 110V, 63A DCDB with incomer of 63A MCB and outgoing feeders of 4 no. of 32 A MCB feeders, 4 Nos. of 16A MCBs.12V,70 A (min.) cell booster -1 no. DCDBs shall be floor mounted/ wall mounted and shall not be housed inside battery charger. This includes supply of spares, transportation, all labour and materials, as per approved drawings, technical specification and directions of Engineer-in- Charge, Complete in all respects. |
| 52 | Supply |
| 53 | Installation |
| 54 | LT PDBs |
| 55 | Supply, Installation, testing and commissioning of 415V, 1250A, 50kA totally type tested PDB panel with aluminum bus bar of internal arc withstand rating of 50 kA for 0.3 sec as per IEC 61439 and IEC 61641. Panel shall be TPN, with ACBs, MCCB feeders, indoor metal enclosed with following feeders complete with multi function meters, metering and numerical relays, CTs, PTs etc. including supply of all spares, product catalogues as per datasheet, technical specifications, other codes and standards attached or referred, including transport, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, complete in allrespects Feeder details: Incomer ACB 1250A ACB - 1 Nos., Outgoing feeders- 630A MCCB - 4 Nos., 400A MCCB-2 Nos. |
| 56 | Supply |
| 57 | Installation |
| 58 | Supply, Installation, testing and commissioning of 415V, 1000A, 50kA totally type tested PDB panel with aluminum bus bar of internal arc withstand rating of 50 kA for 0.3 sec as per IEC 61439 and IEC 61641. Panel shall be TPN, with ACBs, MCCB feeders, indoor metal enclosed with following feeders complete with multi function meters, metering and numerical relays, CTs, PTs etc. including supply of all spares, product catalogues as per datasheet, technical specifications, other codes and standards attached or referred, including transport, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, complete in allrespects Feeder details: Incomer-1000A ACB- 2 Nos., Bus Coupler 1000A ACB- 1 No., Outgoing feeders- 400A MCCB-4 Nos., 250 A MCCB - 2 Nos., 125A MCCB - 2 Nos. |
| 59 | Supply |
| 60 | Installation |
| 61 | Supply, Installation, testing and commissioning of 415V, 250A, 36kA totally type tested PDB panel with aluminum bus bar of internal arc withstand rating of 36 kA for 0.3 sec as per IEC 61439 and IEC 61641. Panel shall be TPN, with MCCB feeders, indoor metal enclosed with following feeders complete with multi function meters, metering and numerical relays, CTs, PTs etc. including supply of all spares, product catalogues as per datasheet, technical specifications, other codes and standards attached or referred, including transport, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge, complete in all respects. Feeder details: Incomer-250A MCCB- 1 No., Outgoing feeders- 125A MCCB -2 Nos., 63A MCCB- 4 Nos., 32 A MCCB - 2 Nos. |
| 62 | Supply |
| 63 | Installation |
| 64 | Supply and installation of vertical model double door TPN/SPN Distribution boards with minimun IP 43 of S8 way vertical TPN MCB DB with following components.a. 63A , 100mA FP RCBO - 1 No Incomer b. 25A, 3P MCB - 4 Nos.b. 10 A SP MCB - 4 Nosc. 25A SP MCB -8 Nos |
| 65 | Supply |
| 66 | Installation |
| 67 | MV cables : Supply & laying of following sizes of 1.1 kV extruded XLPE insulated and round wire armoured FRLS cables with extruded PVC ST2 type inner and outer sheaths as per specification and data sheets of this tender and directions of Engineer-in-Charge. |
| 68 | 3.5CX300 sq.mm A2XWY |
| 69 | Supply |
| 70 | Installation |
| 71 | 3.5CX240 sq.mm A2XWY |
| 72 | Supply |
| 73 | Laying |
| 74 | 4CX 16 sq.mm 2XWY |
| 75 | Supply |
| 76 | Laying |
| 77 | 3CX16 sq.mm 2XWY |
| 78 | Supply |
| 79 | Laying |
| 80 | 4CX 4 sq.mm 2XWY |
| 81 | Supply |
| 82 | Laying |
| 83 | 12 C x 2.5 sq. mm, 2XWY |
| 84 | Supply |
| 85 | Laying |
| 86 | 4C X 2.5 sq. 2XWY |
| 87 | Supply |
| 88 | Laying |
| 89 | MV Cable accessories: Supply and making end terminations for following sizes of 1.1 KV grade, XLPE insulated and PVC sheathed armoured FRLS cables including required hardware like double compressed weather proof glands, heavy duty long barrel Copper lugs etc. complete in all respects as per the tender specification & directions of engineer in charges |
| 90 | 12 C x 2.5 sq. mm, 2XWY |
| 91 | Supply |
| 92 | Installation |
| 93 | 4C X 2.5 sq. 2XWY |
| 94 | Supply |
| 95 | Installation |
| 96 | 3CX16 sq.mm 2XWY |
| 97 | Supply |
| 98 | Installation |
| 99 | 4CX4 sq.mm 2XWY |
| 100 | Supply |
| 101 | Installation |
| 102 | 4CX 16 sq.mm 2XWY |
| 103 | Supply |
| 104 | Installation |
| 105 | 3.5C, 240 Sq. mm A2XWY |
| 106 | Supply |
| 107 | Installation |
| 108 | 3.5C, 300 Sq. mm A2XWY |
| 109 | Supply |
| 110 | Installation |
| 111 | Supply and Installation of heat shrinkable Cable joint Kits Straight through type with copper crimping type lugs and all other accessories suitable for 1.1 kV grade XLPE insulated and PVC sheathed armoured FRLS cables of following sizes |
| 112 | 3.5C, 240 Sq. mm A2XWY |
| 113 | Supply |
| 114 | Installation |
| 115 | 3.5C, 300 Sq. mm A2XWY |
| 116 | Supply |
| 117 | Installation |
| 118 | Supply, installation and testing of maintenance free earthing stations with copper bonded steel ground rod with around 25mm dia and 3 Mts long , with 25 kg non polluting, chemically inert Ground Enhancing Material (GEM). The electrodes shall be made of high tensile low carbon steel rod, molecular bonded with 99.99% electrolytic copper with minimum coating thickness of 250 microns suitable for fault current rating of 35kA rms for 1 second as IEC 62561-2. Work shall be complete with SS clamps, inter connecting earth tape between earthing stations, back fill material, construction of masonary chamber of 450 x 450 mm with removable CI cover, earth station markers etc complete as per tender specifications. Pit should be as per IS 3043 |
| 119 | Supply, installation and connection of 50X6 mm GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing cold galvanizing spray / anti corrosive paint / bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc, including all labour and materials as per approved drawings and specifications of this tender and as directed by engineer in-charge |
| 120 | Supply |
| 121 | Installation |
| 122 | Supply, installation, testing & commissioning of marshalling Panel, Relay & metering LAN, ethernet switches, associated inter connecting cable from circuit breakers/ numerical relays/releases/transformer monitoring relays/ battery charging controller of 11KV & 415V PCC, transformers, battery chargers and other equipment to marshalling panel. Accordingly, all equipments required for testing & commissioning of these items with all required accessories & cabling, application software (including licences) compatible with relays, controllers and MFM. etc . are included. complete in all respects |
| 123 | Supply |
| 124 | Installation |
| 125 | Supply, fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneouselectrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including shot blasting, welding, bolting, riveting, supply of necessary anchor bolts and grouting etc., supply of paint and applying one coat of anti-rust primer and two finished coats of approved synthetic enamel paint(as per applicable IS for highly corrosive environment) including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid). |
| 126 | Supply |
| 127 | Installation |
| 128 | Supply, Installation, Testing & Commissioning of 300 kVAr Automatic Power Factor Controlled Capacitor Bank with current transformer, APFC relay, metering & indications for Auto & manual operations and following feeder details: Incomer - 800A MCCB, O/G- 63A MCB -12 Nos., 63A capacitor duty contactors- 12 Nos., 3phase 25 kVAr capacitor banks - 12 Nos. |
| 129 | Supply |
| 130 | Installation |
| 131 | Supply and installation of prefabricated hot dip galvansised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type of approved make and cabLe tray fitting including horizontal and vertical inside and outside bends as per site requirement, including all labour and materials as per appoved drawings and specifiction of this tender and directions of engineer-in-charge |
| 132 | 750mm wide tray |
| 133 | Supply |
| 134 | Installation |
| 135 | 300mm wide tray |
| 136 | Supply |
| 137 | Installation |
| 138 | 100mm wide tray |
| 139 | Supply |
| 140 | Installation |
| 141 | Dismantling works |
| 142 | Dismantling of existing trafos of rating 1.25 to 1.6 MVA and shifting to storage site as indicated by Engineer In Charge |
| 143 | Dismantling of existing LT PCC panel and shifting to storage site as indicated by Engineer In Charge |
| 144 | Removal of existing cables and shifting to storage site as indicated by Engineer In Charge |
| 145 | Excavation and backfilling in all types of soil / rock including disposing of spoil at designatedplace, including all labour and materials, asper approved drawings, specifications andinstructions of Engineer - In - Charge |
| 146 | Cutting of Floor/road/breaking wall and making good the road / floor / surface with M20 RCC and shifting of excess earth to scrap area (as per the directions of engineer-in-charge) |
| 147 | Supply & installation of fire proof sealing system including supply and fabrication of steel frames and other accessories (cement, gravel, sand etc) including drilling, cutting, welding, surface preparation, dresing/chippiong of concrete, enlargement etc. including all minor masonry and structural works and repair of all damages in line with tender specification, and instructions of enngineer--in-charge |
| 148 | Supply |
| 149 | Installation |
| 150 | Supply, fabrication and installation of 6mm thick MS chequered plates for covering floor cut -outs / cable trenches etc including all labour and materials, as per approved drawigs, tender specifications and directions of engineer-in-charge |
| 151 | Supply |
| 152 | Installation |
| 153 | Supply and installation of the following including the supply of necessary clamps, bolts,rawl plugs etc. breaking and making good of walls, if required mounting including all labour and materials complete and as per applicable standards and indian Electricity Rules and as per directions of engineer-in-charge. |
| 154 | Shock hazart charts complete with frame and glass in english and hindi |
| 155 | Supply |
| 156 | Installation |
| 157 | first aid boxes |
| 158 | Supply |
| 159 | Installation |
| 160 | supply and laying of 1000mm wide safety insulation mats of following grades required for maintaince of electrical equipment in substation including cutting to required shape in running length including all labour and materials as per IS 15652 and indian eletrical rules and as per directions of engineer-in- charge |
| 161 | 11kv grade |
| 162 | Supply |
| 163 | Installation |
| 164 | 1.1 KV grade |
| 165 | Supply |
| 166 | Installation |
| 167 | supply of following items as per applicable indian standards /IE Rules |
| 168 | Rubber and hand gloves (11kv grade) |
| 169 | Supply |
| 170 | Installation |
| 171 | Enamelled caution boards |
| 172 | Supply |
| 173 | Installation |
| 174 | Discharge rod with earthing facility (upto 11kv grade) |
| 175 | Supply |
| 176 | Installation Please Enable Macros to View BoQ information |
