Tender For Rev At Imagin Area (Abb-002) Basement, Annexe Building
Tender Value
13.81 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
4 days left
EMD
27620
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rev At Imagin Area (Abb-002) Basement, Annexe Building
BOQ
| Sl. No. | Item Description |
| 1 | Providing wood work with 1st class teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete. |
| 2 | Providing and fixing 1.0mm thick approved make laminate of required colour over existing surfaces along with the adhesive all as required specification design etc. complete as specified and directed by Engineer-In-Charge.1.00 mm thick |
| 3 | Providing and fixing approved quality machine pressed phenol formal dehy de bonded commercial/marine ply wood of approved size and fixing the same with necessary nails/screws/adhesive in partition cupboard shelves/ktichen/cabinets/flush doors etc. at all floors and locations in quantities as required at site in following thickness including 6 mm thick T.W.lipping patti at all exposed edges with nails/screws/hardwares/adhesive wastage in cutting, transportation etc. complete all as directed by the Engineer-In-Charge.Commercial ply |
| 4 | 6mm thick ply |
| 5 | 19mm thick ply |
| 6 | Supply of labour on daily wages in all TMC premises as per requirement basis arefollows |
| 7 | Carpenter |
| 8 | Helper |
| 9 | Providing and fixing alumimium partition to the required height partly glazed and partly panneled or fully glazed or fully panneled using aluminium section ofapproved make heavy quality section 3\\" x1½ \\" / or of various section lesser than mentioned size as approved by EIC. The Aluminium section shall be of Satin finish anodizing of required size for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick nova pan or ancholam both side pre-laminatd board fixed with sloping aluminium beading alround with neoprine gasket glazing with 5.5mm forsted/ bajri/ plain glass of approved make like M/s.Triveni, Shri.Vallabh/J/A/G pilkinten fixed with alumimium channel beading two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed.With powder coated partitions |
| 10 | Partly glazed partly panneled. |
| 11 | Providing fixing door frame and shutter side hung to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet of approved make and quality plain or frosted of bajri glass of approved make like M/s. Triveni/Shri Vallabhj/J//A/G pilkinten fixed with two way PVC lining/rubber gasket to ensure notes tightness and no rattaling and panneling with 12mm thick nova pan or Ancholam finished on both side as required using extruded alumimium section for shutter frame jindal 2425 45 45mm satin finish anodized including P/F push-pull plates handles and of approved make and heavy duty fittings like tower bolts of Archies/Everite make Motice lock of Laxmi/Gold locks with keys hinges of 5 inch or 6 inch as per requirement hydraulic door closer/ floor spring of Henco/Hyper/Everite make of suitable capacity etc. complete as specified and directed. |
| 12 | With powder coated |
| 13 | Providing making and supplying computer table made out of 19mm thick approved commercial ply for table top, mounted on the vertical side support of 19mm thick ply and drawer unit cabinet with 12mm thick ply appron as shown in drawing. The drawer cabinet made out of 19mm commercial ply for sides, shelves and shutters and drawers mounting with heavy duty sliding channel with ready mode key board drawer with heavy sliding channels, all edges shall be lipped with 6mm thick T.W. lipping patti or PVC edge beading matching with laminate. All exposed faces should be 1.0mm thick laminate of approved colour and make, non laminated area should be 0.80 mm thick white / off white laminate including necessary hinges, handle, multuporpose lock, ball catch etc. as per drawing and as specified and directed by Engineer-In-Charge. |
| 14 | Computer table with all inner surface with 0.8 mm thick approved laminate |
| 15 | Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 8 mm thick commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and All exposed surfaces including shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges shiuld be 6mm thick lipping patti or PVD lipping patti matching with laminate finish, locking arrangement with Godrej multipurpose lock etc. All inside areas shall be .80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge.Cabinate with inner side 0.8 mm thick laminate ( White / Offwhite ) |
| 16 | With shutter |
| 17 | Providing and laying poly vinyal chloride (PVC) rolls of 1.5m / 2.00 mtr width manufactured by approved pattern/colour and design for flooring, skirting/dado/ laid or existing smooth cement tile or concrete of plastered finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete including making leveling existing surface with POP & adhesive to make surface proper laying generally as per manufacturer’s specifications. PVC approved make , approval by Engg-in-charge.2mm thck PVC flooring |
| 18 | Providing and laying new PVC flooring. |
| 19 | Removal of old formica along with the adhesive making the surface smooth etc. complete as specified and directed by engineer In charge |
| 20 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main\\"T\\" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed byEngineer-in-charge. |
| 21 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.a) Plain sheet |
| 22 | Removing old aluminium partition with all fittings transporting to the required place in T.M.C. premises and refixing the same after making the required modification adding the required aluminium sections at the new site of work including materials labour etc. complete as directed by engineer in charge. |
| 23 | Labour charge only for removing and re-fixing available door shutter / window frame with necessary modification including cutting the existing shutter providing leeping patti all around the shutter if required including removing and refixing availbale old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter in proper plumb and level etc. complete all as per specified and directed by Engineer-In-ChargeRemoving and refixing door shutter |
| 24 | Removing existing false ceiling of any material and any size with all necessary allied works, removing out debris out of TMH premises as directed by Engg-in-charge |
| 25 | Sun control film of any design & Colour & approved make |
| 26 | Providing making and fixing in position counter consisting of top (all width 2inch-6 inch) made out of 25mm commercial ply of approved make supported on drawer unit of ht.2 inch -6 inch and vertical supports at regular internals as shown in drawing made out of 15mm thick approved commercial ply and the counter made above the table of required width and size with vertical divider all made out of 19mm thick approved commercial ply and 12mm thick approved commercial ply for front side of counter with approved laminate or 10mm teak wood lipping on all exposed edges and table top edges should be 1 ½ inch x1 ½ inch finishing with and approved colour and moulding plastic laminate 1.0mm thick for all exposed surface etc. all inside surface shall be 0.8mm thick approved laminate soft board of 12mm thick pasted with approved adhesive and covered with tepestery felt cloth of required colour |
| 27 | including cost of all hardware like hinges, tower bolt, handles, knobs, computer ready-made keyboards, cable manager, CPU stand made by 19mm thick ply with approved laminate finish and locking arrangement with Godrej multipurpose lock etc. complete as specified and directed. |
| 28 | Supply & installation of surface Board Legrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring) |
| 29 | 2 nos 16 amp socket 2 nos 16 amp switch |
| 30 | CHAPTER 1 - POINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete. |
| 31 | Primary point length 4 mtrs to 7 mtrs |
| 32 | Primary point length 7 mtrs to 10 mtrs |
| 33 | Secondary point Extending from Primary point upto 4 m |
| 34 | DISMANTLING & REPAIRING :- Providing qualified Wireman and a helper with tools for carrying out assigned jobs day to day Maintenance such as repairing / dismantling the existing light, fan, bell, independent plug point wiring of all types with accessories and cable /switchgear in an approved manner as per instruction of Engineer Incharge ( reqd materials will be provided by TMC) |
| 35 | Supply & installation of surface Board Legrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring) |
| 36 | Telephone Outlet with telephone I/O, back box and face plate in all respect (without telephone wire) |
| 37 | CHAPTER 6 - Telephone Wiring :- Supplying and laying 0.5 mm gauge unarmoured telephone wire D.O.T approved, make Dlink/Finolex/Digilink/Polycab through exisitng conduit/casing caping/cable tray. |
| 38 | 2 Pair |
| 39 | CHAPTER 2 - SUB MAINS Mains :- Providing Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete. |
| 40 | 2 x 1.5 sq mm -+ 1.5sqmm Earth wire |
| 41 | 2 x 2.5 sq mm -+ 1.5sqmm Earth wire |
| 42 | 2 x 4 sq mm -+ 2.5 sqmm Earth wire |
| 43 | Supply & Installation of White Colour Legrand-Myrius Series /MK-Blenze Series Accessories as below |
| 44 | 6A Switch 1 way - 1M Cat. No. 6730 00 |
| 45 | Switch 16 amps 1M with Indicator Cat. No. 6730 10 |
| 46 | 6A - Socket - with Shutter - 3 Pin - ISI - 2 Module |
| 47 | 6/16 A socket - 2 module Cat. No. 6730 45 |
| 48 | Supply & Installation of White Cover Plates with frames of Legrand-Myrius / MK Wraparound plus |
| 49 | 6 Module - |
| 50 | 8 Module - |
| 51 | Supply & Installation of Legrand-Myrius MK Plastic Surafce boxes |
| 52 | 6 Module - |
| 53 | 8 Module - |
| 54 | S&C hylam sheet of 3 mm thick to be used for covering MS boxes etc including cutting,drilling,fixing with nut bolts/ screws cup washers etc complete as required and to the satisfaction of incharge with making necessary groove/ cutting for fixing electrical accessories. |
| 55 | Cable Glands - Double Compression with Termination:- Supplying and erecting heavy duty flange type brass cable glands including appropriate size of earth tag washer for gland to connect earthing with cable. Gland should be with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells. |
| 56 | 2 to 4 core 2.5/4/ 6 sq mm |
| 57 | 3 to 4 core 25-50 sq mm |
| 58 | CHAPTER 5 : Distribution Boards Supply, installation, testing & commissioning DBs for mounting MCB/ELCB/Isolator - on wall complete. |
| 59 | TPN 8 way IP 43 with Metal door |
| 60 | SPN 12 way IP 43 with Metal door |
| 61 | SITC of Legrand DX3 make AC C Curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner. |
| 62 | 6 to 32 A DP MCB 10 KA |
| 63 | 6 to 32 A FP MCB 10 KA |
| 64 | 40 to 63 A 4 P MCB 10 KA |
| 65 | 6 to 32 A SP MCB 10 KA |
| 66 | Providing ,fixing and commissioning of Legrand DX3 make RCBO |
| 67 | 32A FP - 100 mA 7 module Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender