|
| 1 | Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screwsand CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ+/- 5 % |
| 2 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended there after with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitoris to be taken separately). |
| 3 | Supply of 4sqm sumbmercible Cable with ISI make etc., complete as per Standard Specification(IS694/1990) |
| 4 | Labour charges for the erection of submersible pumpset in borewell / openwell including fixingand jointing submersible cable with properclamps upto the starter to required depth andalso fixing of riser pipes to the required depthvalves erection clamps, pressure gauges uptothe exterior wall of pump room and erectionof panel board consisting of TPICN switchesstarter, Voltmeter, Ammeter, three pilot(indicating) lamps capacitor single phasingpreventor, water level guard and laying andjointing the cables and twin earthing as per IErules etc., complete and testing the pumpset and trail run for 10 days. |
| 5 | Supply and delivery of the following size of 50mm UPVC Pipes with ISI Specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard Specification |
| 6 | Charges for developing the Borewell with aircompressor of 600 CFM capacity (Minimum 8Hours) including transportation, labour andfuel charges for compressor as directed byTWAD Officers and conducting yield test by‘V’ notch method.(Charges for developing the Borewell with air compressor of 600 CFM capacity) |
| 7 | Supply and delivery of the following size of PVC Pipes with ISI Specification |
| 8 | 63mm PVC Pipes |
| 9 | Earthwork excavation and depositing on bank with initial lead and lift as in initial of 10M and lift of 2M in narrow trenches for laying of Pipes for water supply work in hard stiff clay,stiff black cotton,hard red earth shales,murram gravel,stoney earth and earth mixed with small size boulders and hard gravel soil including refilling the sides of foundation in layer of 15m thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification |
| 10 | Lowering PVC/ DWSC rigid pipes and specials to trench and laying to propergrade and alignment, jointing with PVC couplers with cement paste. |
| 11 | Add G.S.T. @ 18% Please Enable Macros to View BoQ information |
