Name of Work:- Nuasadak -Sudarsanpur- - Haridaposi_Road_SDBC, BUSG, flank dressing_4.800 to 6.000
Sl. No.
Item Description
1
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with cost conveyance royality T &P taxes of bitumen emulsion & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including cess as per specification & direction of Engineer-in-charge.
2
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & bridge works (4th Revision) including cost conveyance royalties & taxes of chips and bitumen with cost of all labour charges & cess etc complete as per specification and direction of the Engineer-in-Charge.
3
Earth work in excavation in foundation in hard soil including hard moorum, stony earth mixed with boulders (except sheet rock & boulders requiring blasting) with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads & lifts including cost of all labour, cess & T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.
4
Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, royality, taxes of all materials and cost of all labour & T & P as required for the item of work including cess etc complete as per specification & direction of Engineer-in-charge.
5
Providing Cement Concrete (1:3:6) with 40mm size clean crusher broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position ramming using vibrator to proper slope and levelling with cost conveyance taxes royality, labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & cess as per the specifiction and direction of Engineer-in- charge (Crusher Broken )
6
Providing Cement Concrete of M15 grade with 40mm and downgrade size clean hand broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance taxes royality, labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge
7
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and cess as per the specification and direction of Engineer-in-charge.
8
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works(4th Revision) including hire and running charges of Roller and all other machineries , cost, conveyance & royality of materials , T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
