|
| 1 | Construction of RCC gaurd posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technocal Specification Clause. |
| 2 | Finishing wall surface with Acrylic wall putty(water based)of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all material, taxes, cess, labour ,T&P etc. complete. |
| 3 | Finishing wall with plastic paint of approved shade two coats over a coat of primer to give an even shade including cost of paints. |
| 4 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MORD specification for Rural roads and as per the direction of the Engineer-in-Charge. |
| 5 | Labour for scraping cleaning the road surface applying tack coat using 3.0 of bitumen for 10 sqm and laying 37.5 mm thick built up spray grouting in one layer using 0.45 cum of 25mm to 40mm size H.G. metal and 12.00 kg of bitumen for 10 sqm with 0.12 cum of 12 mm size H.G. chips as key stone for 10 sqm spreading and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with P R R including hire and running charges of P R R and all other machineries etc complete. |
| 6 | Providing and applying tack coat using bitumen of 60/70 grade @ 0.2kg per sqm on the prepared bitumenous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge. |
| 7 | Providing and laying 20mm thick Open Graded Premix Carpet using 0.27cum of 13.20mm to 5.6mm size C.B.H.G. stone chipping using mini Hot mix Plant over prepared surface using a total quantity of 14.6 kgs of 60/70 penetration grade Bitumen per 10.0Sqm and compacting with 8 -10T power road roller including hire & running charges of PRR, HMP, bitumen boiler & other T&P, cost conveyance royality & taxes of all materials,labour charges for cleaning the surface spreading laying and cambering premix carpet for finished item of work etc.complete as per the specification and direction of the Engineer-in-Charge. |
| 8 | Providing & laying 6mm thick pre-coated seal coat type-B using 0.06cum of 6.7mm size C.B.H.G.chips as per sieve analysis & 6.8kg of 60/70 grade bitumen per 10sqm including hire and running charges of PRR, Hot mix plant, tar boiler & all other T&P articles including cost, conveyance, royalty, taxes of all materials etc. complete as per specification and direction of the Engineer-in-Charge. |
| 9 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 |
| 10 | Providing fitting and fixing of expansion joint Fixing of Strip seal Expansion Joint |
| 11 | Fixing of Salitax Board |
| 12 | R.C.C M30 using 20mm down graded HG chips with all leads and lifts including cost, conveyance, taxes, royalty of all materials required & cost of all labour, T&P etc. complete as per the direction of Engineer-in-Charge. |
| 13 | Construction of embackemnt with approaved material obtained from borrow pits with all lifts and leads , transporting to site by mechanical means within a lead of 5 kms spreading , grading to required slope and compacting to meet requirment of table 300-2 & clause 305 of MoSRT&H Specification for road & Bridges Work Please Enable Macros to View BoQ information |
