|
| 1 | Clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3M(1ft-0) girth on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, T&P, cess, articles required for the work etc. complete and direction of the Engineer-in-charge. |
| 2 | Flank dressing to proper camber with all taxes , labour including hire and running charges of machinaries T&P required for the work including cess as per the specification and direction of Engineer-in-charge. |
| 3 | Clearing the Existing BT Surface |
| 4 | Providing,scraping & cleaning the road surface for 37.50 MM thick BUSG applying tack coat using 3.0 Kg. of bitumen for 10 Sqm and laying 37.50mm thick built up spray grouting in One layer using 0.45 cum of 25mm to 40mm size hard granite metal and 12.00 kg penetration grade of bitumen(80/100) for 10 sqm with 0.12 cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries and including cost and conveyance bitumen, metal and chips with all labour, T & P & cess etc completed as per specification and direction of Engineer-in-Charge. |
| 5 | Providing and laying tack coat over the prepared surface ( Treated with Primer ) of penetration grade of bitumen (80/100) with cost conveyance royality T &P taxes of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including cess as per specification & direction of Engineer-in-charge. |
| 6 | Providing & laying 20mm thick premix carpet using 0.18 Cum of 13.2 mm and 0.09 cum of 11.2 mm size chips for 10sqm on road surface using 14.60 Kg. penetration grade of bitumen (60/70) for 10 Sqm over the prepared surface including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR, bitumen mixtures,hot mix plant, tar boilers and all other T&P articles and also including cost conveyance royalties & taxes of chips and bitumen with cost of all labour charges & cess etc complete as per specification and direction of the Engineer-in-Charge. |
| 7 | Providing and laying 6m thick pre-coated seal coat type B using 0.06 cum of 6.7 MM size h.b.g. chips and down graded as per sieve analysis per 10 Sqm and 6.8 Kg of bitumen(60/70) for 10 sqm on the road surface area & rolling with PRR including hire and running charges of PRR and all other machineries ,hot mix plant, cost, conveyance & royality of maxphalt, 6mm size hard black granite chips with all labour, T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge. |
| 8 | labour for soreading moorum on road flanks & consolidation with HRR etccomplete |
| 9 | 16 mm thick CP in (1:6) cm etc complete as per E.I.C |
| 10 | Wall Priming one coat with any approved shade of primer ( WBD )on New Plastered surface of with any approved primer including cost of primer ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete.as per direction of Engineer-in-charge. |
| 11 | Wall painting two coats with any approved quality of Weather seal coat over one coat of Primerwith any approved shade including cost of paint on New Plastered surface of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete. Please Enable Macros to View BoQ information |
