|
| 1 | Taking down shutters of any description n exc 1 sqm each commplete and removing from site.. |
| 2 | Taking down shutters of any description exc 1sqm and n exc 2 sqm each commplete and removing from site.. |
| 3 | Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each commplete and removing from site. |
| 4 | Taking down chowkats with shutter (without taking shutter from the frame) exc 1.5 sqm each but not exc 4 Sqm each. |
| 5 | S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamvered, put together with glue pinned at joints complete all as soecified and directed. |
| 6 | M & L preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint area exc 0.1sqm but n. exc 0.5sqm each complete all as soecified and directed. |
| 7 | S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 290-0 or E 165 complete all as soecified and directed. |
| 8 | M&L cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) for hold fasts complete all as specified. |
| 9 | S & F Second class hard wood factory made glazed and skeleton shutters 30 mm thick, open rebatede and prepared to receive glass, gauze etc (with or without sash bars), edges of framing plain chamfered of rounded, fitted with cut and mitred beads for securing glass etc. Size of members of shutters shall be as specified in SSR PartI, section 8.20 (b). |
| 10 | S&F Second class hard wood factory made glazed and skeleton door shutters 35 mm thick, open rebatede and prepared to receive glass, gauze etc (without sash bars), edges of framing plain chamfered of rounded, fitted with cut and mitred beads for securing glass etc. Sizes of members of shutters shall be as specified in SSR PartI, sec 8.20 (a). all as specified and directed. |
| 11 | S&F 35mm thick second class hard wood factory made plain framed panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed. |
| 12 | S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. |
| 13 | All as per item No. 12 above but 30 mm thick . |
| 14 | S&F MS 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge. |
| 15 | S &F factory made excruded WPC (wood polymer Composite) solid door Frames/chowkhat of size 65x100 mmcomparising of virgin PVC Polymer of K value 58-60(suspended Grade),Calcium carbonate and natural fibers(wood powder/ricehusk.wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum,screw withdrawal strength of 2200N(face) & 1100N (Edge),miniimum compressive strength of 58 N/mm2,modulus of elastisity 900N/mm2 and resistance to spread of flame of class A categary with property of being termite/borer proof,water/moisture proof,water/moisture proof anf fire retardantan fix in position with lugs /SSdash fasterers of required dia and length complete as per direction of Engineer In charge.Note :- For WPC doors minus 5 mm tolerance in dimension i.e depth and width of profile shall be acceptable.Variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | S &F factory made excruded WPC (wood polymer Composite) solid decorativ type flush door of size 30 mm thick comparising of virgin PVC Polymer of K value 58-60 (suspended Grade),Calcium carbonate and natural fibers(wood powder/ricehusk.wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum,screw withdrawal strength of 1800N(face) & 900N(Edge),miniimum compressive strength of 50 N/mm2,modulus of elastisity 850N/mm and resistance to spread of flame of class A categary with property of being termite/borer proof,water/moisture proof,water/moisture proof anf fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approcved design pasted with hot melt adhesive on both faces pfshutter and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer In charge |
| 17 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PLAIN COLOURED PVC sheet reinforced with MS square tube, to match complete all as specified. |
| 18 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheets and 5mm thick x 15mm wide PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of PLAIN COLOURED PVC sheet joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing. |
| 19 | M&L for anodisd aluminium frame work for doors,windows,ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified. |
| 20 | M&L Aluminium window and ventilator shutter side hung without sash bar aluminium section weighing 0.55 kg/m including necessary jointing cleats,glazing clips rubber packing complete all as specified. |
| 21 | M&L Anodised alminim window and ventilator shutters, fixed type without sash bar, aluminim section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 22 | S&F aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) all complete. |
| 23 | S&F stainless steel wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples |
| 24 | All as per item No. 23 above but fixed in repairs. |
| 25 | S & F 100mm size stainless steel butt hinges, ISI Mark complete all as soecified and directed.. |
| 26 | S & F 75 mm size stainless steel butt hinges , ISI Mark complete all as soecified and directed. |
| 27 | S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as soecified and directed. |
| 28 | S & F extruded aluminium alloy handles 100mm size, fabricated type, anodised complete all as soecified and directed. |
| 29 | S & F Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed complete all as soecified and directed. |
| 30 | S & F Aluminium, anodised, barrel tower bolts 100 mm size of extruded section and fixed complete all as soecified and directed. |
| 31 | S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed. |
| 32 | S&F in repair aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, length of bolt 250 mm complete as specified |
| 33 | S & F in repairs 100mm size stainless steel butt hinges , ISI Mark complete all as soecified and directed. |
| 34 | S & F in repairs 75 mm size stainless steel butt hinges , ISI Mark complete all as soecified and directed. |
| 35 | S & F in repairs extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as soecified and directed. |
| 36 | S & F in repairs extruded aluminium alloy handles 100mm size, fabricated type, anodised complete all as soecified and directed. |
| 37 | S & F in repairs Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed, ISI Mark complete all as soecified and directed. |
| 38 | S & F in repairs Aluminium, anodised, barrel tower bolts 100 mm size of extruded section and fixed, ISI Mark complete all as soecified and directed. |
| 39 | S & F in repairs Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed. |
| 40 | S&F in repair aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, length of bolt 200 mm complete as specified |
| 41 | S & F in repairs aluminium plate type II hooks and eye 150mm size complete all as soecified and directed. |
| 42 | S & F in repairs hasp and staple 150mm size safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all asl directed. |
| 43 | S & F in repair powder coated aluminium serrated finish 25mm dia curtain rod fixed with sheet metal C/P screws rovel plugs with and including MS powder coated decorative dome type, curtain rod side brackets pair fixed etc. complete all as specified and directed. |
| 44 | Dismentling of MS grill of any description |
| 45 | S&F framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 all as specified and directed. |
| 46 | Ditto item No.45 above but fabrication and refixing only. |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.all as specified and directed. |
| 48 | S & F figured/sheet glass 4mm thick glass, pin head type and glazing with oil putty in squares/wooden beading n exc 0.5 sqm in each pane.all as specified and directed. |
| 49 | S&F floated/sheet 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square exc 0.5 sqm in each pane.all as specified and directed. |
| 50 | S & F floated/sheet glass 4mm thick sheet glass ordinary quality and glazing with oil putty in square/wooden beading n exc 0.5 sqm in each pane. |
| 51 | Taking down and refixing of M.S. grills fitted to chowkats/wall including continuous welding cleaning of steel surfaces complete. |
| 52 | Taking down and refixing of wooden or aluminium shutters of any description n exc 1 sqm each. |
| 53 | M & L for Preparation of new surfaces of wood and wood based of any description not otherwise described, over 10cm widthor girth and applying two coats of synthetic enamel paint over a coat of pink primer all complete as directed by Engr-in-Charge. |
| 54 | M&L for Preparation of new or previously untreated surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying one coat of red oxide primer and two coat of synthetic enamel paint, complete all as specified and as directed. |
| 55 | M&L for Welding in repairs n.exc 2.5 cm in length. Thickness of metal to be welded n.exc 6 mm. |
| 56 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc and removing debrish from out side defence land. |
| 57 | Providing and applying 12 mm thick internal plaster in ready mix cement plaster with fair finish at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete. |
| 58 | M & L for Preparing surfaces plastered new wall surfaces and applying two coats of distemper oil emulsion white or tinted over a coat of priming paint all as specified. |
| 59 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid dry and pointed complete all as specified and directed. |
| 60 | M&L machine cut Kota stone ( coloured, mirror polished) slab in one piece as in window jambs & cill ,staircase treads 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified. incl 20mm thick in CM 1:4 complete all as specified. |
| 61 | Removing demolished materials outside MD land to a distance exc 5Km but n exc 10Km all as directed by EIC.Note: For Sl No 1 to 60 work is to be carried out in G +14 storey buildings and the rates are deemed to be included necessary arrangements for work invludng scaffoding, safety net cloth etc. Please Enable Macros to View BoQ information |
