|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) not other wise specifically provided for complete all as specified and directed. |
| 2 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, Arches etc and removal of debrishes from site complete all as specified and directed. |
| 3 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radious, built in cement mortar (1:6) complete all as specified and directed. |
| 4 | Description same all as per item No 3 here-in-before but except bricks (Bricks shall be obtained from demolition). Note : Rates for segregation of old bricks, stacking, cleaning etc shall be included in this item. |
| 5 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed |
| 6 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any mean radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 7 | Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed. |
| 8 | M&L for 15mm thick rendering in CM (1:4) on external surface fair/other than fair faces of brick wall finished even and smooth etc complete all as specified and directed. |
| 9 | M&L for Preparing new plastered wall surfaces and applying two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed. |
| 10 | M&L for Preparing, plastered or unplastered of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 11 | M&L for Keyed pointing in cement mortar (1:4) to brick wall of drains complete all as specified and directed. |
| 12 | De-silting and cleaning of existing rain water drain and removing the earth / sand / silt and shrub and other materials etc complete to a distance exc. 250 mtr but not exc 500 mtr and depositing where directed at a level not exc 1.5 mtr above the starting paint complete all as specified and directed. |
| 13 | Grubbing up tree trunk/shrubs etc girth not exc 30 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground and removing of unserviceable material to a distance not exc 50 mtr and clearing site complete all as specified and directed. |
| 14 | M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 15 | M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain finished surface even & fair complete all as specified and directed. |
| 16 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. (inner girth only measured) |
| 17 | Add or Deduct from item No 16 here-in-before for each 25mm girth or part thereof over or under 30cm inner girth complete all as specified and directed (inner girth only measured). |
| 18 | Demolition of reinforced cement concrete of any description and in any position as in ground foors complete all as specified and directed. |
| 19 | M&L for Reinforcement cement concrete pre-cast reinforced cover slab (1:2:4) type B-1 using (20mm graded crushed stone aggregate) as in manhole cover of any size including RCC ring/Frame and MS frame set in CM (1:4) including necessary formwork etc complete all as specified and directed. |
| 20 | M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 21 | Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed. |
| 22 | M&L 75mm thick type D-2 1:4:8 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 23 | M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed. |
| 24 | M&L (Except Tiles) for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed. |
| 25 | M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed. |
| 26 | M&L (Except tiles) for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed. |
| 27 | M&L 300mm x 300mm Chequered cement concrete tiles thickness not less than 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 28 | M&L for vitrified pavement outdoor tiles of 300mm x 300mm not less than 9mm thick coloured for floor / pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer i.e cement mortar (1:6) complete all as specified and as directed |
| 29 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 30 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, leveling course bed block and other similar bands, plinth courses, string courses, lacing courses, opings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 31 | M&L for preparation of new concrete/brick/stone/floor or plastered surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed. |
| 32 | S&F mild steel framed work such as grills, gratings etc with ends of bars shoulders or reveted, forged into spikes, framed guard bars, railings, ladders and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 33 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 34 | S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 35 | Excavating in soft/loose soil as in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 36 | M&L for PCC (1:3:6) type C-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 37 | M&L for two coats of synthetic enamel paint on new steel surfaces of any description over and including a coat of red oxide primer including preparation of steel surface complete all as specified and directed. |
| 38 | M&L for preparation of old steel surfacses of any description and applying one coats of synthetic enamel paint etc complete all as specified and directed. |
| 39 | S&F in repair for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed (each line wire to be measured) |
| 40 | S&F in repair chain link mild steel galvanized fencing of mesh size 50mmx50mm and not less than 3mm dia hot dipped GI wire fixed and binding with GI wire complete all as specified and directed. |
| 41 | Taking down PVC pipe of any size or pattern including all fitting head, shoe, band, swan neck etc complete all as specified and directed. |
| 42 | S&F 110mm bore PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 43 | S&F 110mm borePVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid in trenchs or floor 110mm bore complete all as specified and directed. |
| 44 | S&F 75 mm bore PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls/trenches complete all as specified and directed. |
| 45 | S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and directed. |
| 46 | S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. |
| 47 | S&F PVC (SWR) Junnction single (T) equal or unequal 110mm dia complete all as specified and directed. |
| 48 | S&F in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed |
| 49 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 50 | S&F PVC stack clamps out of suitable for 110 mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and directed. |
| 51 | S&F PVC stack clamps out of suitable for 75mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and directed. |
| 52 | S&F in repair rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 25mm, float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 gms complete all as specified and directed. |
| 53 | S&F in repairs to triple layer black/white colour rotational moulded vertical water storage tanks with closed tops (cylinderical) hoisted and fixed in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed bot h ends for iron pipes and fixed 25mm, float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 grams complete all as specified and directed. |
| 54 | S&F in repair ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 grams complete all as specified and directed. |
| 55 | S&F in repair Stop Valve/Gate Valve 25mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 56 | Taking up or down old steel tubing 15mm dia complete all as specified and directed. |
| 57 | Taking up or down old steel tubing 20mm dia complete all as specified and directed. |
| 58 | Refixing old 15mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed. |
| 59 | Refixing old 20mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed. |
| 60 | S&F 15mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including cutting chaising, if required complete all as specified and directed. |
| 61 | S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including cutting chaising complete all as specified and directed. |
| 62 | S&F in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device complete all as specified and directed. |
| 63 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 64 | S&F in repair vitreous china one piece EWC (pedestal pattern) Snow white/Star white/ white type with 'S' concealed trap, front of back inlet including all fitting e.g soft seat cover, lid, twin flush fitting, health faucet, CP brass angular cock with wall flange, CP brass toilet paper holder etc complete all as specified and directed. Make : Hindware model Constellation premiu for EWC & Cistern with lid model No 21038 or CERA model Calvina or equivalent model of make specified in Appendix 'B' to particular specifications. |
| 65 | S&F in repairs vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling urinal Spreder with cp pipe up to angle cock,waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed. |
| 66 | S&F in repairs sensor based vitreous China Urinal, Half stall type, white including 32mm dia CP coupling urinal Spreder with cp pipe up to angle cock,waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed |
| 67 | S&F in Repair for vitreous china wash and basin thin rim table top basin of size 415 x 415 x 145mm shape round complete all as specified and directed |
| 68 | S&F in Repair for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed |
| 69 | S&F in repairs PVC flushing cistern 10 ltrs capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 70 | S&F in repair Vitreous China wash basin, flat back, size 450 x 300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 71 | S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 20mm - 45 grams / 40mm - 60 grams waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specified and directed. |
| 72 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 73 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 74 | S&F in repair wash basin mixter fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for 15mm dia iron pipe and fixed complete all as specified and directed. |
| 75 | S&F for Wall mixer with provision for overhead shower with 115mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. |
| 76 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 77 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams) complete all as specified and directed . |
| 78 | S&F in repair PVC waste pipe 32mm dia 800mm long for wash basin, Make - Prayag Cat No - 237, complete all as specified and directed. |
| 79 | S&F for corner glass self (with bracket) complete all as specified and directed. |
| 80 | S&F in repair CP vitreous china soap dish fancy type complete all as specified and directed. |
| 81 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 82 | S&F in repair Brass chromium plated, tubular towel rails 20mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 83 | S&F in repair brass chromium plated shower roses with swivel joints, 200mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 84 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 85 | M&L for Non-Skid coloured vitrified ceramic tiles not less than 9mm thick, scratch free, acid reistance (square/rectangular) area of tiles exc .18 Sqm and not exc 38 Sqm in each tiles as in floors, skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc complete all as specified and directed. |
| 86 | M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. |
| 87 | M&L for vitrified light shade floor tiles (scratch free Double charge GVT) 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 88 | M&L for Glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:3) complete etc (1st quality/Premium Quality) complete all as specified and directed. |
| 89 | M&L for Glossy elevation tiles in vertical surface 450 x 300 x 7mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:3) complete etc (1st quality/Premium Quality) complete all as specified and directed. |
| 90 | Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan & not exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed. |
| 91 | Removal of excavated material (soil) to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point complete all as specified and directed |
| 92 | Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed. |
| 93 | M&L for 100mm bore salt glazed stoneware drain pipe grade ‘A’ conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed. |
| 94 | M&L for 150mm bore salt glazed stoneware drain pipe grade ‘A’ conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed. |
| 95 | M&L for cement concrete aggregate bed to drain pipe 100 mm dia including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed. |
| 96 | M&L for cement concrete aggregate bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed. |
| 97 | Cutting into existing man holes for connecting new drains making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) surface smooth finished and reforming benching as required for internal dia of pipe 100mm complete all as specified and directed. |
| 98 | Excavation in soft/loose soil for getting out puncturing or existing damaged/broken or otherwise nonfunctional salt glazed stone ware pipe 100mm dia bore (length of pipe 60cm) and supply and fixing salt glazed stone ware pipe of 100mm dia bore grade 'A' ISI Marked including PCC 1:3:6, type C-2 bed and haunching as required incl jointing with existing line, returning, filling in and well ramming the soil and removal of surplus spoil to a distance not exc 50 mtr and deposited where directed etc complete all as specified and directed. |
| 99 | Description same all as per item No 98 here-in before but bore of pipe 150mm |
| 100 | Description same all as per item No 98 here-in before but bore of pipe 300mm |
| 101 | Schedule of Credit (MINUS) Rs. 60,880.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. ___ ] This amount shall be automatically deducted to arrive at tendered sum Please Enable Macros to View BoQ information |
