Tender For Special Repair To 06 Nos Toilet Blocks At First Floor Of Bldg No. P-518, P-517, P-452, P-451, P-402 & P-401 Of 11 Engr Regt Under Ge Bhopal
Tender Value
31.86 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To 06 Nos Toilet Blocks At First Floor Of Bldg No. P-518, P-517, P-452, P-451, P-402 & P-401 Of 11 Engr Regt Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square /rectangular ) area of each tile exceeding 0.11 sqm , but not exceeing 0.18 sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises compelte all as specified & directed. |
| 4 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square /rectangular ) area of each tile exceeding 0.11 sqm , but not exceeing 0.18 sqm , in skirting over and including 10mm thick screed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises compelte all as specified & directed |
| 5 | M&L for glazed tiles , coloured 300x450 x 6 to 7 mm thick as in skirting/dado over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified & directed all as specifeid & directed . |
| 6 | M&L for cement concrete type B-0, 1:2:4 (using12.5mm graded aggregate) 25 mm thick as in levelling course in floors complete all as specified and directed. |
| 7 | Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed. |
| 9 | M&L for reinforced cement concrete (nominal mix) using 20mm graded aggregate type B1, 1:2:4 on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 10 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius, built in cm 1:6 incl demolition of brickwork or stone/boulder masonry , built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles.all as specified and directed. |
| 12 | M&L for 10mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description. complete all as specified and directed. |
| 13 | M&L for three coats of white wash over newly plastered ceiling including preparation of surface complete all as specified and directed. |
| 14 | M&L black granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cm 1:4 including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&L for rounding to edges of stone one edge such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 16 | S&F vitreous china oval shaped cunter top Wash Basin, white , flat back, Size 550x400mm / std size including waste pipe , coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed. |
| 17 | S&F in repairs 15 mm pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 18 | Taking up or down 15 mm bore GI steel tubing and connections, including removal to store complete all as specified and directed. |
| 19 | Taking up or down 20 mm bore GI steel tubing and connections, including removal to store complete all as specified and directed. |
| 20 | M&L 15 mm, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 21 | M&L 20 mm, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 22 | M&L for 32 mm dia, UPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and as directed. |
| 23 | S&F in repair washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan complete all as specified. |
| 24 | S&F in repair vitreous china urinal, full stall type,white including waste pipe and CP urinal spreader complete all as specified and directed. |
| 25 | S&F in repair syphonic action type PVC low level flushing cistern 10 ltrs capacity including 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed. |
| 26 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 27 | S&F in repair 15 mm bore bib taps, cast copper alloy, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 28 | S&F 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing with solvent cement complete all as specified and directed. |
| 29 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 30 | S&F in repair 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (angle cock), screwed down, screwed for iron pipe or union complete as specified and directed. |
| 31 | S&F in repair chromium plated shower roses with swivel joints, any size, including fixing to steel pipe or union complete as specified and directed. |
| 32 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 33 | S&F in repair grating doom 125 mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and directed. |
| 34 | S&F in repair soap dish, any type, fixed to plugs brass screws complete all as specified and directed. |
| 35 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm not exc 4.0 Sqm each and refixing in same opening complete all as specified and directed. |
| 36 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed. |
| 37 | M &L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face 0.9 mm mica with lipping/frame to match all as specified and directed. |
| 38 | S&F 2nd class wood 30mm thick glazed and skelton shutter open rebeted and prepared to receive glass gauge etc (with sash bar) edges of framing plain champhered or rounded fitted with cut and mitred beads for securiing glass complete all as specified and directed. |
| 39 | M&L for water proofing treatment to sunken surfaces of slab including in following sequence complete :- (a) Slope correction providing PCC 1:1.5:3 using 12.5mm graded stone aggregate, average thickness 25mm, mixed graded styone aggregate, average thickness 25mm, mixed with integral water proffing compound \\"DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE , in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen grade VG-10 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water thightness by ponding of water.Note:- Rates including demolition of existing suken slab and concrete complete all as specified and directed. |
| 40 | Taking down cement plaster on brick or stone walls or concrete ceiling etc, including raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed. |
| 41 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including finished even and smooth (without using extra cement) complete all as specified and directed. |
| 42 | M&L for complete removal of existing treatment on ceiling surfaces and applying two coats of white wash complete all as specified and as directed. |
| 43 | M&L for complete removal of existing treatment on wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 44 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 45 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. |
| 46 | S&F 100 mm mild steel, butt hinges, medium weight,cold rolled complete all as specified and directed. |
| 47 | S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 48 | S&F 150mm aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed. |
| 49 | S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 50 | S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 51 | S&F 150 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 52 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron |
| 53 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 54 | M&L for preparatration of old decorated surfaces of ceiling including brooming, scraping down smoke spot, moulds, moss, effloresecent salts trading oil, greasy spots and stopping nails marks and applying One coat of oil bound distemper emulsion having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and directed by Engr-in-Charge. |
| 55 | All as per item Ser No. 53.00 here-in-before but two coats of oil bound distemper emulsion on old prepared wall surfaces including window & door jambs, cills, cornices etc. complete all as specified and directed by Engr-in-Charge. |
| 56 | Taking down PVC pipe (any size or pattern), including all fittings,bends, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 57 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed. |
| 58 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed. |
| 59 | S&F in repair110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends any radius 110 mm dia, jointed with solvent cement all as specified and directed. |
| 61 | S&F PVC (SWR) bends any radius 75 mm dia, jointed with solvent cement all as specified and directed. |
| 62 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement ® complete all as specified and directed. |
| 63 | S&F 110 mm bore PVC (SWR) vent cowl, jointed with solvent cement all as specified and directed. |
| 64 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 65 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with sheel metal ms flesh box, white cover plate with frame for fixing modular switches and sockets etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 66 | All as per item No.64.00 here -in- before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. |
| 67 | All as per item No 64.00 here-in-before but one 5 pin socket outlet 5 Amps on same board all as specified and directed. |
| 68 | All as per item No. 64.00 here-in-before, but 5 pin socket outlet 5 amps on independent board elect wiring 1.5 sq mm complete all as specified and directed. |
| 69 | S&F modular switch piano, flush type, single pole, one way, 6 amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. |
| 70 | S&F in repairs ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. |
| 71 | S&F modular socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 6 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 72 | S &F modular switch single pole one way, 16 Amp, 240 V, 50 Hz, AC, ISI marked complete all as specified and directed. |
| 73 | S&F modular socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 16 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 74 | S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings with 9 Watt LED Bulb all as specified and directed. |
| 75 | Taking down existing unserviceable fitting any type any size and Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 76 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 77 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 04 way Single door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. |
| 78 | S & F in repairs MCB SPN suitable for 240 volts, AC supply 32 Amps, C Curve, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 79 | S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.Make- Legrand/ Seimens/ Schinder. |
| 80 | M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed.Note:- Two runs of 4.0 sqmm wire, one runs of earth and one run of PVC caping measured in one length. |
| 81 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louvers Note :- Old/unserviceable exhaust fans to be deposited at MES Store yard |
| 82 | Deduct Schedule of credit (calculation will be done off line) Rs. 25621.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender