Tender For Repair/ Cleaning Of Sewage Line, Septic Tank, Soak Well, Man Holes And Other Connected Works Under Age B/R-Ii Of Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
10 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Cleaning Of Sewage Line, Septic Tank, Soak Well, Man Holes And Other Connected Works Under Age B/R-Ii Of Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of underground Horizontal sewage pipe of any dia upto 200mm (Cleaning length not exceeding 30m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n.exc 300m and burying in a pit and replacing manhole cover in position after cleaning complete all as specified and directed. |
| 2 | Cleaning and maintenance of sewage line any dia upto 200mm and 2 to 6 meter depth manholes (as per MAP QTR COMMON CENTRAL SEWAGE LINE and MANHOLES) in the following steps:- (i) Dewatering of manholes (ii) Removing of all sludge/waste material from all manholes, desalting of floor, lean the floor and walls of the manhole after removing complete sludge/materials with clean water (iii). Removing the temporary blockage of inlet/outlet pipe and making functional the manholes. (iv) Remove all taken out sludge/ waste materials in covered containers out side the Defence Land. any means and getting out and removing sludge to a distance up to 3 km out side of defence land limit and disposal in low lying area and including removing of all types of blockage of any length between two consecutive deep manholes and to keep smooth functioning without any blockage in any situation by mechanical means with manual and mechanical process (sewer suction machine) including removal and refixing of man hole covers complete all as specified and as directed. |
| 3 | Dewatering of Septic tank, soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygienic complete all as specified and as directed. Note : 10000 Ltr container considered for one trip. |
| 4 | De-sludging of Septic tank, Manholes of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filter beds of any description and in anomy position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spreading required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing position complete all as specified and as directed. |
| 5 | M&L for Cutting of grass, growth/vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/manholes in any location or condition etc all as specified and as directed. |
| 6 | Attending and rectifying sewage complaint such as blockage of chocked bathroom / WC / kitchen block / WHB drainage / chamber and also tightening of loose rain water pipe and outlet PVC pipe and making functional open drainage main hole sewage line etc complete all as specified and directed and directed any type any time between 9 AM to 6 PM including holiday all as specified and as directed.Note : (1 )Only experienced 04 Nos sewage cleaners shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (2.) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged. |
| 7 | S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580x440mm white, with integal foot rests, (excluding flushing cistern and flush pipe) including 110mm bore PVC (SWR) 'P' trap and lime concrete bedding complete all as specified and directed. |
| 8 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 9 | S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed. |
| 10 | S&F in repairs wall hung EWCs snow white with duroplast slim soft close seat cover including rag bolts and concealed cistern set as per site requirement and connection to drain or outgoing pipe complete all as specified and directed |
| 11 | S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed. |
| 12 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm long complete all as specified and directed. |
| 13 | S&F in repairs cistern internal syphon kit of one piece EWC/WC complete all as specified and as per site requirement. |
| 14 | Excavation in trenches, not exceeding 1.5 Mts wide and not exceeding 10 Sqm on plan area and not exceeding 1.5 m deep in Soft/Loose soil complete all as specified. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified. |
| 16 | Removal of excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 17 | Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 18 | Demolition and breaking up drain pipes 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 19 | M&L for 200mm bore of reinforced concrete pipe class NP2 laid in trenches and jointed with collar complete all as specified and directed. |
| 20 | M&L for Concrete bed to drain pipes of size 200 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete,Type C2, 1:3:6, using 40 mm graded stone aggregate complete all as specified and as directed. |
| 21 | M&L Ultra P E,DWC (Double wall corrugated) pipe confirming IS-16098 Part-2 2013 pertaining structure wall plastics pinning system for sewage 150 mm bore and above bore pipe SN-8 and all necessary fittings and fixtures complete all as specified and as directed. |
| 22 | M&L for Concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete,Type C2, 1:3:6, using 40 mm graded stone aggregate complete all as specified and as directed. |
| 23 | Demolition of old size brick work built in cement morter including all quoins, arches, pillars etc, complete.complete all as specified and directed. |
| 24 | Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as directed. |
| 25 | M&L for PCC 1:4:8, Type D–2, (using 40 mm graded stone aggregate) as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified. |
| 26 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 27 | M&L for (Except brick) brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 28 | Taking down cement plaster from inside/outside of existing septic tank/manholes etc incl raking out joints, hecking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed. |
| 29 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra including mixing water proofing compound as per Manufacturer's instructions complete all as specified. Note: Water proofing compound shall be measured and paid separately. |
| 30 | Supply only Liquid water proofing compound (ISI Marked) of approved make complete all as specified and directed. |
| 31 | M&L for PCC 1:3:6, Type C–1, using 20 mm graded stone aggregate as in coping including use and waste of form work and finishing the exposed faces of concrete even and smooth without using extra cement complete all as specified and as directed. |
| 32 | Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) reinforced complete all as specified and directed. |
| 33 | M&L Reinforced cement concrete type B1 (1:2:4) using 20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 34 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 20 mm thick (horizontal or sloping) complete all as specified and directed. |
| 35 | M&L for Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed. |
| 36 | Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 37 | Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 38 | M&L Reinforced cement concrete type B1 (1:2:4) using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 39 | M&L Reinforced cement concrete type B1 (1:2:4) using 20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 40 | Formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed. |
| 41 | Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 43 | S&F framed work such Fe 410-W (Gde- E- 250) quality- A Fe as in doors or sliding gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 44 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165, for portions framed and hund as gates including pintle hinges, stops hand made sliding bolts etc. for ornamental and intricate designcomplete all as specified and directed. |
| 45 | M&L for 16mm to 18mm thick granite (of any type/any colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 10mm thick rendering in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 47 | Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed. |
| 48 | M&L for 100 mm thick cement concrete 1:2:4 Type B-1 (20mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. finishing cement concrete even and smooth without using extra cement complete all as specified and directed |
| 49 | M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed |
| 50 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 51 | M&L for exterior grade, coloured cement concrete designer heavy duty parking tiles of size 300mmx300mmx25mm thick, set,jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour/ matrix of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 as in floor etc. complete all as specified and directed. |
| 52 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed. |
| 53 | M&L for exterior grade, coloured vitrified ceramic designer floor tiles for parking area, paved area, size 400mm x 400mm x 12mm thick, set,jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour/ matrix of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 as in floor etc complete all as specified and directed. |
| 54 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 55 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 56 | M&L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in foundations, fillings, Mass concrete, footings etc complete all as specified and directed. |
| 57 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 58 | M&L for preparation of steel and iron surface not exceedding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed. |
| 59 | Supply only galvanized, medium zinc coating 120-150 GSM as per IS-2721-2003 chain link fencing. Note : In every 1 to 3 mtr original manufacturer logo printed chain link fencing wire and material test certificate and authentication should be provided by manufacturing companycomplete all as specified and directed. |
| 60 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 61 | S&F mild steel bolts n exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexogonal or square exc 30 cm long complete all as specified and directed. |
| 62 | S&F Mild steel round bars 10 mm dia and over, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. (Fe-410-W) (Gde.E-250)quality-A or Fe 290 (Gde -E-165)complete all as specified and directed. |
| 63 | S&F in repairs galvanized, medium zinc coating 120-150 GSM as per IS-2721-2003, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). Note : In every 1 to 3 mtr original manufacturer logo printed barbed wire and material test certificate and authentication should be provided by manufacturing company complete all as specified and directed. |
| 64 | M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cement plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed. |
| 65 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 66 | S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 67 | S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 68 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 69 | S&F in repairs 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 70 | S&F in repairs 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 71 | S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 72 | S&F in repairs 110mm bore PVC(SWR) vent Cowl complete all as specified and directd. |
| 73 | S&F in repairs 75mm bore PVC(SWR) vent Cowl complete all as specified and directd. |
| 74 | Cutting of roads for removing damaged drain pipes and laying of pipes with all neccessary fittings any length with collers, laid in trenches or in floors 150/200mm bore complete all as specified and as directed including making good the road cutting complete all as specified and directed.Note. pipe will be measured separately in respective item. |
| 75 | Cutting into exisiting manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender