|
| 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material & Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge |
| 3 | All as per item No 02 described here-in-before but except stone built in cement mortar 1:6.complete all as specified and directed. |
| 4 | Material and labour for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm granite or trap stone complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:4) complete all as specified and as directed including safety arrangements/formwork/staging to work in sloped terrain all as specified and as directed by Engineer-in-Charge. |
| 6 | Material & Labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | All as per item No. 06 described here-in-before but except brick built in cement mortar 1:6.complete all as specified and as directed. |
| 8 | Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 9 | Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces & finishing the surface even & smooth without using extra cement using water proofing compound complete all as specified and as directed by Engineer-in-Charge. complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately |
| 10 | Supply only liquid water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit |
| 11 | Material and labour for preparation of new plastered surfaces of wall surfaces & applying two coats of cement based paint over coat of cement based primer complete all as specified and as directed by Engineer-in-Charge.Make : Snowcem/Duracem/Aquacem/Berger/Shalimar/ Birla Opus Paint |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. |
| 13 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material & Labour for PCC 1:3:6 Type C-2 using 40 mm graded aggregate Cement concrete in foundations, filling and mass concrete complete all as specified and directed |
| 15 | Material & Labour Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E- 165 complete all as specified and as directed by Engr-in-Charge |
| 16 | Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed by Engineer in charge. |
| 17 | S & F 4 mm thick Chain link MS galvanising fencing, any size or type including line wires, any mesh, 50x50mm size and type to any type of standards, rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 18 | Supply & Fix in repairs for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 19 | Supply & Fix in repair razer type concertina coil SG hot galvanised spring tensile wire, 145 to 150 newton per sqmm,zinc coating 250-300mm gm per sqm dia of coil when unstreached 600 mm minimum nos of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick,19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding Z coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed. Note:- Chain link fencing weight of fencing exc 2 kg/Sqm |
| 20 | Material & Labour for preparing new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd/Birla Opus Paint |
| 21 | Demolition of Concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level) removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material & Labour for 50 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path and finishing the surface even and fair without using extra cement all as specified and directed. |
| 23 | Material & Labour for 100 mm thick cement concrete 1:2:4 type B-1 using 40 mm graded stone aggregate as in flooring/ path/ hard standing surface finished even and smooth with out using extra cement all as specified and directed. |
| 24 | Material & Labour for 75mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in Plinth protection of flooring finishing the surface even and fair without using extra cement all as specified and directed. |
| 25 | Material & Labour for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' 100 mm thick of concrete slab complete all as specified and directed. |
| 26 | Material & Labour for 25mm thick sand filling under floors or in foundation with clean dry fine sand unwashed including gently punning watering and consolidation complete all as specified and as directed by Engineer-in-Charge |
| 27 | Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment to match in floor complete all as specified and as directed by Engineer-in-Charge.Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur |
| 28 | Material and labour for heavy duty coloured chequered tiles of size 300x300x25mm thick (+/-) in approved design, colour manufactured by rubber mould technology, conforming to IS 13801 for wear/abrasion, resistance, water absorption, wet transverse strength, fitness, perpendicularity and straightness and ASTM:303, tiles shall be manufactured in two layers, top layer (minimum 6mm thick), should be silica sand, graded marble stone aggregate with white cement \\"Bayer\\" pigments conforming to relevant IS code and bottom layer could be in grey cement, laid over and including cement including cement screed bed 20 mm thick in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the complete all as specified and as directed by Engineer-in-Charge. Make- Ultra tiles Pvt Ltd, Duracrete Tiles or Eurocon Tiles |
| 29 | Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for wall (reinforcement cut as required to facilitate demolition including removing debris out side MD land complete all as specified and as directed by Engr-in-Charge. |
| 30 | Material & Labour for TMT bars, 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 31 | .-ditto- as per item no.30 but 6mm to 8 mm dia as in stirrups, spacers, binders, nibs for fencing posts all as specified |
| 32 | Material & Labour RCC 1:2:4 Nominal mix (using 12.5 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 33 | Material & Labour for RCC 1:2:4 Nominal mix (using 12.5 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 34 | Material & Labour for Formwork to the flat concrete surfaces of footings as in foundation; vertical or to batter for fair finished surfaces, complete all as specified and directed |
| 35 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 91,850.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
