Tender For Repairs To Leakage/Seepage, Sanitary Fittings And Connected B/R Items To Jcos/Or/Fafa Md Accn At Joginder Singh Enclave Under Age B/R-I At New Cantt Prayagraj
Tender Value
48 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Leakage/Seepage, Sanitary Fittings And Connected B/R Items To Jcos/Or/Fafa Md Accn At Joginder Singh Enclave Under Age B/R-I At New Cantt Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Demolition, Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 2 | Demolition, Cement Concrete (reinforced) of roof and floor, beams, staircase, landing, chajjas, kitchen slab, RCC water tank and similar suspended work in any position complete all as specified and as directed |
| 3 | M&L for Reinforced Cement Concrete 1:1.5:3 nominal mix type A-2 (using 20mm graded stone aggregate) in chajjas beams lintels cantilever, supportrd slabs using necessary form work complete all as specified and as directed. Note : Form work paid separately. |
| 4 | M&L form work to soffits and suspended slabs such as roof, chajja slabs, floor slabs landings and similar work not exceeding 200mm thick (horizontal or sloping), complete all as specified and as directed |
| 5 | S&F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed |
| 6 | Demolition of Brick work built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed |
| 7 | M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and as directed |
| 8 | M&L for taking down cement of cement mortar plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed |
| 9 | M&L for Rendering 10mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and fair complete all as specified and as directed |
| 10 | M&L for Rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even complete all as specified and as directed |
| 11 | M&L for Rendering 10mm thick in cement plaster 1:3 on ceilings fair faces of brick work or concrete surfaces finshed even complete all as specified and as directed |
| 12 | M&L for preparing new plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed |
| 13 | M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat 1mm thick wall care putty complete all as specified and as directed |
| 14 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed |
| 15 | Supply and fixing in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device including Jet spray complete all as specified and as directed |
| 16 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580mm x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and as directed |
| 17 | S&F in repairs for bottle trap (with internal partition ) 32mm size with 300mm & 190mm long wall connection pipes & wall flanges complete all as specified and as directed |
| 18 | S&F in repairs PVC flushing cistern 10 ltrs capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and as directed |
| 19 | S&F in repair Vitreous China wash basin, flat back, size 550 x 400mm white, excluding taps, chain and plug and porcelain stopper but including CP waste coupling, brackets and waste pipe complete all as specified and as directed |
| 20 | S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 20mm - 45 grams / 40mm - 60 grams waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specified and as directed |
| 21 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified and as directed |
| 22 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and as directed |
| 23 | S&F in repair wash basin mixture fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for 15mm dia iron pipe and fixed, complete all as specified and as directed |
| 24 | S&F for Wall mixture with provision for overhead shower with 115mm bend pipe on upper side, connecting legs and wall flanges complete all as specified and as directed |
| 25 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed |
| 26 | S&F shelf of PTMT 300mm x 100mm fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams) complete all as specified and as directed |
| 27 | S&F in repair PVC waste pipe 32mm dia 800 mm long complete all as specified and as directed |
| 28 | S&F for corner glass self size not less than 250mm (with bracket) complete all as specified and as directed |
| 29 | S&F in repair CP Soap dish fancy type complete all as specified and as directed |
| 30 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and as directed |
| 31 | S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, complete all as specified and as directed |
| 32 | S&F in repair brass chromium plated shower roses with swivel joints, 125mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed |
| 33 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including incl disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed bot h ends for iron pipes and fixed 25mm, float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 grams complete all as specified and as directed |
| 34 | S&F in repairs to triple layer black/white colour rotational moulded vertical water storage tanks with closed tops (cylinderical) hoisted and fixed in position 500 ltrs capacity including disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed bot h ends for iron pipes and fixed 25mm, float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 grams complete all as specified and as directed |
| 35 | S&F in repair 20mm bore ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed minimum weight 210 grams complete all as specified and as directed |
| 36 | S&F stop valves/gate valves 25mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed |
| 37 | Taking up or down old steel tubing 15mm dia complete all as specified and as directed |
| 38 | Taking up or down old steel tubing 20mm dia complete all as specified and as directed |
| 39 | Refixing old 15mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed |
| 40 | Refixing old 20mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed |
| 41 | S&F 15mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including cutting chaising, if required complete all as specified and as directed |
| 42 | S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including cutting chaising complete all as specified and as directed |
| 43 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed |
| 44 | S&F of 110mm dia (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed |
| 45 | S&F of 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed |
| 46 | S&F PVC SWR (110) bends any radius complete all as specified and as directed |
| 47 | S&F 75mm PVC (SWR) junction single, (single T) (equal or unequal), ordinary or inverted ( spigot or socket type) or with paralle oval access doors branches complete all as specified and as directed |
| 48 | S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed |
| 49 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed |
| 50 | M&L PVC (SWR) gully trap 125mm/110mm setting and jointing with solvent cement complete all as specified and as directed |
| 51 | S&F PVC stack clamps out of suitable for 110mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and as directed |
| 52 | S&F PVC stack clamps out of suitable for 75mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and as directed |
| 53 | Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof, floors, channels, kerbs, aprons etc, cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and as directed |
| 54 | Demolition of Mud/mud puska/PCC in roofs, any thickness, including plastering, leeping or any treatment (whether full thickness removed or only a part thereof) complete all as specified and as directed |
| 55 | M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in padding to maintain proper slope as required complete all as specified and as directed |
| 56 | M&L for bedding layer 10mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with @ 200 ml liquid water proofing compound by 50 Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately. |
| 57 | M&L for applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 @ 1.20 Kg/Sqm over and including applying a coat of bituminius primer @ 0.30 litres per square meter uniformily after fully dried concrete/plastered surface of roof slab complete all as specified and as directed |
| 58 | M&L for APP based polymeric water proofing membrane minimum weight 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150 grams/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer complete all as specified and as directed |
| 59 | M&L for cutting out cracks to V Section in existing roofs or terraciv cleaning out and filling solidify with hot mixture of bitumen and clean dry sand 1:1 by weight complete all as specified and as directed |
| 60 | M&L for 40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on roof area and proper curing with water by ponding complete all as specified and as directed |
| 61 | Description same all as per item No 60 here-in-before but except brick tiles Note : Brick tiles used would be obtained from items Dismantling of brick tiles |
| 62 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs, Chajja of window/ ventilator or mud stops, rounded or chamfered on top of chajja & side edges of surfaces upto the height of 7.00 mtr, coping, benching etc complete all as specified and as directed. Note : The rate is deemed to be inclusive of scaffolding/form work. |
| 63 | M&L for Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 as in parapet, stairs including stringers, treades, landing, balusters, hand rails etc including necessary welding/riveting and fixing the sectiones complete all as specified and as directed |
| 64 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 65 | M&L for green marble work table rubbed and polished thickness not less than 16mm for wall lining/kitchen platform over including 15mm thick screed bed in CM 1:6 and moulding of edges pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed |
| 66 | M&L for Granite work (table rubbed and polished) thickness not less than 16mm in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 and moulding of edges wherever required complete all as specified and as directed |
| 67 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed |
| 68 | M&L for 600 x 600mm coloured ceramic tiles joint free, scratch free (square/rectagular) thickness not less than 8mm (1st quality/Premium Quality) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed |
| 69 | Description same all as per item No 68 here-in-before but as in skirting over 10mm thick rendering in CM (1:4) |
| 70 | M&L for 300 x 300mm Non Skid coloured ceramic tiles thickness not less than 7mm joint free (square/ rectagular) (1st quality/Premium Quality) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed |
| 71 | M&L for 450 x 300mm or 600 x 300mm Glazed ceramic tiles in vertical surface thick joint less tiles thickness not less than 7mm (1st quality/Premium Quality) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:3) complete etc, complete all as specified and as directed |
| 72 | M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as flooring ,leveling course, string course lacing course in ground floors etc complete all as specified and as directed |
| 73 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) for plinth protrction etc complete all as specified and as directed |
| 74 | Supply only liquid integral water proofing compund, complete all as specified and as directed |
| 75 | M&L for sunkan portion including demolation of existing PCC, WC, P or S Trap & removing the material out side MD land and :- (a) Preparation of RCC surface of sunken slab (floor) by brushing and cleaning throughly with water. (b) Application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP). (c) 15mm thick (1:4) plaster over chemical coating including finished even & smooth without using extra cement all as directed. Note : Continuity with cementitious water treatmentbeyond sunken portion in toilet shall be maintained. |
| 76 | M&L for taking down cement plaster including tile etc and removing the material out side MD land and :- (a) Preparation of RCC surface of sunken slab (side) by brushing and cleaning throughly with water. (b) Application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP). (c) 15mm thick (1:4) plaster over chemical coating including finished even & smooth without using extra cement all as directed. Note : Continuty with cementitious water treatment beyond sunken portion in toilet shall be maintained. |
| 77 | M&L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / mass concrete complete all as specified and as directed |
| 78 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 79 | M&L for Solid PVC Frame for door, kitchen cabinet, cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 80 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) both side prelam pvc sheet of decortive choice consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification including 3 Nos 100mm stainless steel hinges, 2 Nos of 150mm long Aluminium tower bolt 2 Nos of 150mm long Aluminum handle, long etc complete all as specified and as directed |
| 81 | S&F 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed |
| 82 | S&F 150mm long Aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed |
| 83 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised SS hinge pin, anodised and fixed, type B-21 complete all as specified and as directed |
| 84 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed Please Enable Macros to View BoQ information |
| 85 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender