|
| 1 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed. |
| 2 | M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement, complete all as specified and directed. |
| 3 | M&L Rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered or unplastered/undecorated surfaces as of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered or unplastered/undecorated surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 7 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 8 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed |
| 9 | M&L coloured Non skid ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed. |
| 10 | M&L coloured Non skid ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed. |
| 11 | M&L 7 to 8 mm thick ceramic tiles Ditto but on vertical surfaces such as skirting/Dado fixed on and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed. |
| 12 | M & L coloured glazed ceramic tiles 300x 450 x 7mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:4), on fair faces of brick or concrete surfaces complete all as specified and directed. |
| 13 | M&L Light shade coloured Virified Ceramic tiles 8 to 9mm thick (Double charged)(square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 14 | Dittoall as per item No 13 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar. |
| 16 | M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), laid over and including screed bed or bedding layer 20mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishingincl complete all as specified and as directed. |
| 17 | M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 18 | M&L 20-25mm thick granite ( of any type) work (table rubbed and polished ) in cooking plateform, shelves and the like, over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including taking out the old broken stone complete all as specified and directed. |
| 19 | Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified |
| 20 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified |
| 21 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, complete all as specified |
| 22 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified |
| 23 | S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete as specified and as directed. |
| 24 | S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete as specified. |
| 25 | M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer. |
| 26 | Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge. |
| 27 | S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b)complete all as specified and directed |
| 28 | S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 29 | S&F for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube and fixing in opening as specification & drawing, complete all as specified and directed. |
| 31 | S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified. |
| 32 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 33 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section. |
| 34 | Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 35 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete. |
| 36 | S&F 150 mm long, Aluminum anodised floor door stopper alloy body and tounge, anodised, with hard drawn steel spring fixed in floor in repairs complete as specified and as directed. |
| 37 | S&F in repair 150 mm long, Aluminum anodised floor door stopper alloy body and tounge, anodised, with hard drawn steel spring fixed in floor in repairs complete as specified and as directed. |
| 38 | Taking down easing adjusting of old wooden shutters of anyn description exc. 1 sqm but n.exc 2 sqm each and refixing in same opening after tiling work complete all as specified and as directed. |
| 39 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 40 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 41 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls. |
| 42 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls. |
| 43 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, including removal of rubbish outside MoD land complete all as specified. |
| 44 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as directed by EIC. |
| 45 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and as directed |
| 46 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 47 | S&F in repair Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including seat cover , fixing bolts connection to trap & to flush pipe complete all as directed by the Engineer-in-charge. |
| 48 | S&F in Repair Plastic water closet seat cover(Casgade model) closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc complete all as specifed and directed. |
| 49 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 50 | S&F in repair vitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified. |
| 51 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, etc complete all as specifed and directed. |
| 52 | S&F in repair Stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug , waste pipe ,washers including cantilever cast iron brackets, connecting union etc overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160 mm complete all as specified |
| 53 | S & F in repair 600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 54 | S&F in repairs concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 55 | S&F in repairs stop cock/angle cock with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 56 | S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms). Complete all as specified and as directed. |
| 57 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 58 | S&F in repair Centre hole basin mixture with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, complete all as directed by EIC. |
| 59 | S&F in repair Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts all as specified and as directed.Make: Onida/ High Life/ Eagle |
| 60 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repair Chromium plated, stainless steel , jet spray including 1.5 mtr long flexible tube butterfly type including necessary connection for wash down water closet (pedestal pattern), complete all as directed |
| 62 | S&F in repair Sheet glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed |
| 63 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc as specified. |
| 64 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/laid in floors complete all as specified & directed. |
| 65 | S & F 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed. |
| 66 | S & F 110 mm bore PVC (SWR) junctionsingle, (single T), equal or unequal with/without door of any radius complete all as specified & directed. |
| 67 | S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed |
| 68 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/laid in floors complete all as specified & directed. |
| 69 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 70 | S & F 75 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed. |
| 71 | S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed |
| 72 | S&F PVC floor trap with grating incl jointing to waste pipe of 75 mm dia in and including jointing with solvent cement complete all as specified and directed. |
| 73 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 74 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed. |
| 75 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 76 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 60cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed |
| 77 | Dismantling water tanks Capacity of tank exc 250 & n. exc 500 ltrs removing complete all as specified and as directed |
| 78 | Dismantling water tanks Capacity of tank exc 500 & n. exc 1000 ltrs removing complete all as specified and as directed |
| 79 | Supply and fixing rotational moulded polyethylene three layered water storage tanks 500 litres capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 80 | Supply and fixing rotational moulded polyethylene three layered water storage tanks 1000 ltrs capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 81 | S & F in repair for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, Bore dia of pipe in 20 mm, etc complete all as specifed and directed. |
| 82 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge. |
| 83 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 84 | M&L for PCC (1:3:6) Type C-2 50 mm thick using 40 graded stone aggregate as in sub base of floor all as specified. |
| 85 | S&F Factory made machine pressed Chequered cement concrete colour tiles 30 cm X 30 cm X22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed. |
| 86 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand. |
| 87 | Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand. |
| 88 | M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges, copping etc in any description |
| 89 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 90 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 91 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 92 | Dismantling Asbestos cement sheets (corrugated ,semi corrugated etc) in roof coverings incl ridges etc complete. |
| 93 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 94 | Dismantling boarding of any description , fixed in any posititon with nails , complete all as specified and directed |
| 95 | S&F 18 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) fixed with screws , solvent cement/adhesive to make kitchen cabinet sides , top & bottom shelves inside the cabinets . Complete all as specified and directed .Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company |
| 96 | S&F 18 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) of one side prelam/ rigidlam and the other side balancing laminate colour to make the kitchen cabinet shutter/ drawer front shutter . Complete all as specified and directed .Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company |
| 97 | S&F 12 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) fixed with screws , solvent cement/adhesive to make kitchen cabinet back and pull out drawer sides . Complete all as specified and directed .Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company |
| 98 | S&F 20 mm wide and 1 mm thick PVC edge beading of PVC pasted on edges with suitable adhesive Complete all as specified |
| 99 | Supply & fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters make; (Hettich,Ebco,prime) |
| 100 | S&F for stainless steel handles 100 mm size for kitchen cabinet / cupboard shutters. |
| 101 | Supply & Fixing of Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 102 | S&F Sheet glass of ordinary quantity 5mm thick and glazing with oil putty in squares any size in each pane including hacking out the glass. complete all as specified and directed by Engineer-In-Charge. |
| 103 | S&F Sheet glass pin headed 5mm thick and glazing with oil putty in squares any size in each pane including hacking out the glass. complete all as specified and directed by Engineer-In-Charge. |
| 104 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed. |
| 105 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed. |
| 106 | S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares any size in each pane, complete all as specified. Note:- New wooden required for glazing glass in wooden window will be paid for separately. |
| 107 | S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding any size in each pane, complete all as specified. |
| 108 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 109 | Supply only TMT steel bars for reinforcement in required length and dia, complete all as specified and directed. |
| 110 | Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed. |
| 111 | Providing and fixing in repair decorative PVC louvred panels on wall surface, made from extruded rigid PVC profiles of approved quality , thickness not less than 12mm, designed with verticle or horizontal slats (louvers) for asthetic wall cladding purposes, fixed to a GI/Wooden framenor directly to wall using stainless steel screws, adhesive, or mechanical fastners as per manufacturer's specifications, including surface prepration, edge trimming, joints finishing, and making good the disturbed surfaces. Complete all as specified and directed. |
| 112 | S& F in repair designer PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site with or without PVC frame as per specifications and drawing, complete all as specified and directed. |
| 113 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed. |
| 114 | S&F factory made uPVC texture colour (wood finish) casement (openable) /(sliding) window with pleated mesh area made of extruded profiles with wall thickness of 2.0mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), sash (60mmx73mm),T profile (One vertical length in between two shutters) (60mmx74mm) Glazing bead(35x20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + -0.2 mm thick galvanized steel frame (28mmx21.5mm) sash (31mmx27.5mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [ casement handle made of zinc alloyed (while powder coated) Butt hinges of zinc alloyed (white powder coated) transmission gear made of mild steel with multi point locking system) and 6 mm thick toughened glazing with selected quality glass complete all as specified and as directed. Note : Selected quality clear Glass and mesh cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 115 | S&F factory made uPVC texture colour (wood finish) casement (Open-able) door with pleated mesh made of extruded profile with wall thickness of 2.0mm (+/- 0.2mm). door profile with hollow section with multi chamber, frame (60mmx58mm) T profile (One vertical length in between two shutters) (60mmx71mm) Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanized steel frame (28mmx21.5mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [ three track window/ door handle made of zinc alloyed (while powder coated) Corner strikers: cylinder, Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder coated)] and 6mm thick toughened glazing with selected quality glass. Note : Selected quality clear/frosted Glass and mesh cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. Please Enable Macros to View BoQ information |
