Tender For Petty Repair And Day To Day Complaitns To Mh And annual maintenance contract Unit And Officer Md Accn Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_774428_1)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair And Day To Day Complaitns To Mh And annual maintenance contract Unit And Officer Md Accn Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_774428_1)
BOQ
| Sl. No. | Item Description |
| 1 | M&L 15 mm thick plaster in cement mortar 1:6 on fair faces brick /concrete surfaces with finished even and smooth without using extra cement in patches n.exceeding 3 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of oil bound distemper including prepration of new surfaces complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L 15 mm thick plaster in cement mortar 1:4 on other than fair faces brick /concrete surfaces with finished fair and even without using extra cement in patches n.exceeding 3 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of cement base paint including prepration of new surfaces complete all as directed by Engr-in-Charge. |
| 3 | Flush pointing in CM 1:3 on roof top of bldg including racking out old pointing including removing vegetation/grass from the roof surface as, complete all as directed by Engr -in-Charge. |
| 4 | Demolition of brick work built in cement mortar, complete all as specified and as directed. |
| 5 | Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6, complete all as specified and as directed. |
| 6 | Ditto all as per serial item No 5 above, but except bricks, complete all as specified and as directed. |
| 7 | Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls in CM 1:4, complete all as specified and as directed. |
| 8 | Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed. |
| 9 | M&L 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 10 | M&L 12mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified |
| 11 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound emultion over a coat of primer , complete all as specified and as directed. |
| 12 | M&L for Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint on plaster surface complete all as as specified and as directed. |
| 13 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land, complete all as specified and as directed. |
| 14 | M&L for Vitriefied ceramic tiles 10mm thick LIGHT SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer 1:4 CM, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, complete all as specified and as directed. |
| 15 | M&L for Vitriefied ceramic tiles 10mm thick DARK SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, complete all as specified and as directed. |
| 16 | M&L for Vitriefied ceramic tiles 10mm thick Light Shade for (Vertical surfaces) polished area of each tiles not exceeding 0.36 sqm including 10mm thick rendering 1:4 CM layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, complete all as specified and as directed. |
| 17 | M&L for non skid ceramic tiles/ non skid tiles coloured, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed. |
| 18 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed. |
| 19 | M&L for glazed ceramic coloured tiles of size 300 x 200 x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles, complete all as specified and as directed. |
| 20 | M&L Glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450x300x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick plaster in CM 1:4 to receive the tiles complete all as specified and as directed. |
| 21 | M&L for 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 22 | Makrana White Marble work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade, complete all as specified and as directed. |
| 23 | M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:3 complete all as specified and as directed. |
| 24 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete . |
| 25 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in floor patches upto 5 sqm each, finished even and smooth with using extra cement, complete all as specified and as directed. |
| 26 | M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and as directed. |
| 27 | M&L for coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and as directed. |
| 28 | M&L for sand cushion 25mm thick and well ramming including watering as required complete all as specified and as directed. |
| 29 | M&L for 60 mm thick Machine pressed precast concrete interlocking paver block, rubber moulded, vibratory casted, glossy finish any shape and size with grey cement and pigment, confirming to IS 15658-2006 of M 35 Grade complete all as specified and as directed. |
| 30 | Ditto all as per items no 29 above,but except tile, complete all as specified and as directed. |
| 31 | M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work, complete all as specified and as directed. |
| 32 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and as directed. |
| 33 | M&L Reinforced cement concrete 1:1 1/2:3 using 20mm graded stone aggregate as in slabs, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like complete all as specified and as directed. |
| 34 | S&F fair finish form work to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc. complete all as specified and as directed. |
| 35 | S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed. |
| 36 | S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy, complete all as specified and as directed. |
| 37 | S&F for MS 300 mm long mild steel sliding door bolts stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified, fixed in repair, complete all as specified and as directed. |
| 38 | S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open, complete all as specified and as directed. |
| 39 | S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and as directed. |
| 40 | S&F MS barrel tower bolt , 200 mm long stove enameled black with bright bolt and fixed in repairs complete all as specified and as directed. |
| 41 | S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and as directed. |
| 42 | S&F in repairs 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and as directed. |
| 43 | S&Fin repairs 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and as directed. |
| 44 | S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required, complete all as specified and as directed. |
| 45 | S&F in repairs 125 mm size extruded aluminium alloy handles fabricated type anodized, complete all as specified and as directed. |
| 46 | S&F in repairs MS pressed handles , oval type, stove enameled black 125 mm size complete all as specified and as directed. |
| 47 | S&F in repairs 40 mm dia powder coated cup board knobs fixed with nut screws and washer of mild steel bright finish powder coated, complete all as specified and as directed. |
| 48 | S&F in repairs peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair, complete all as specified and as directed. |
| 49 | M&L for 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall, complete all as specified and as directed. |
| 50 | M&L in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified |
| 51 | S&F in repairs curtain brackets suitable for 19/ 25 mm bore curtain rod etc, complete all as specified and as directed. |
| 52 | S&F in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc all as specified |
| 53 | S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 60mm complete all as specified |
| 54 | S&F in repairs 100 mm size Hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 55 | S&F in repair aluminium corrugated nosing strip of as per required size for stair case fixed with screws complete all as specified and as directed. |
| 56 | M&L Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete, fixed in repairs, complete all as specified and as directed. |
| 57 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 3 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame, complete all as specified and as directed. |
| 58 | Ditto all as per ser item No 57 above, but exc 0.50 sqm in each pane 4mm thick, complete all as specified and as directed. |
| 59 | S&F Figured Glass 3.0 mm thick, Pin Head type and glazing with Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed. |
| 60 | supply and fix sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame, complete all as specified and as directed. |
| 61 | S&F for 5mm thick glass for Aluminium door and windows/ ventilators including Rubber bedding, clipping and other glass fitting complete all as speified and as directed. |
| 62 | Easening of door exc 1sqm but not exc 2 sqm each by making ajdustment to hinges planning the sides of doors including taking down of door and refixing if required, complete all as specified and as directed. |
| 63 | Ditto all as per ser item No 62 above but not exc 1 Sqm each, complete all as specified and as directed. |
| 64 | Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required, complete all as specified and as directed. |
| 65 | S&F Ist class soft wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer, complete all as specified and as directed. |
| 66 | S&F 2nd class soft wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads, sectional area exc 06 Sqcm and not exc 13 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer, complete all as specified and as directed. |
| 67 | Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30 mmx 40 mm long embedded in cement mortar 1:3 and two providing new side MS clips and fixed with MS screws complete, the length of pelmet not exc 1.5 m , complete all as specified and as directed. |
| 68 | Petty repairs to cup board (kitchen) including easining of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers), complete all as specified and as directed. |
| 69 | Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified. |
| 70 | S&F in repair 9 mm plywood, grade BWR type BB) fixed with screw to timber frame or shutter any thickness, complete all as specified and as directed. |
| 71 | S&F in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame or shutter any thickness, complete all as specified and as directed. |
| 72 | Taking down aluminium door shutter including floor door closer, removing galss with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter, complete all as specified and as directed. |
| 73 | S&F in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, complete all as specified and as directed. |
| 74 | M&L in repairs 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and teak wood leaping all around the edges complete all as specified and as directed. |
| 75 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame), Not.exc 1.5 Sqm each complete all as specified and as directed. |
| 76 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame), exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed. |
| 77 | Taking down shutters of any descreption exc 1sqm but not exc 2 sqm removing to store, complete all as specified and as directed. |
| 78 | S&F 35 MM thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces, complete all as specified and as directed. |
| 79 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 80 | S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.24 (a) of SSR Part-I, complete all as specified and as directed. |
| 81 | S&F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 82 | S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 83 | M&L for preparation of newly wooden based surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer surfaces complete all as specified and as directed. |
| 84 | M&L for preparation of newly steel surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer surfaces complete all as specified and as directed. |
| 85 | S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed . |
| 86 | S&F Solid PVC Door Frame of size 60mm x 30mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 87 | S&F 125 mm size extruded aluminium alloy handles fabricated type anodized, complete all as specified and as directed. |
| 88 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and as directed. |
| 89 | S&F 75mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixeds for PVC doors doors, complete all as specified and as directed. |
| 90 | S&F for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 91 | S&F in repairs 3 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and as directed. |
| 92 | S&F cast iron body Door closer hydrau- lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and as directed. |
| 93 | Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer in charge |
| 94 | Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all as directed by Engineer in charge |
| 95 | Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines, complete all as specified and as directed. |
| 96 | S&F in repairs 15 mm bore Stop cock standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)., complete all as specified and as directed. |
| 97 | S&F in repair for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed |
| 98 | S&F in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type), complete all as specified and as directed. |
| 99 | S&F in repairs 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified |
| 100 | S&F in repair 32mm PVC Waste pipe for Wash basin and urinal complete all as specified and as directed. |
| 101 | S&F in repair 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and as directed. |
| 102 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap, complete all as specified and as directed. |
| 103 | S&F in repairs grating doom 100mm dia PTMT (Min weight 25 grms) |
| 104 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor, complete all as specified and as directed. |
| 105 | S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 106 | S&F in repairs vitreous china wash down water closet pan white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and as directed. |
| 107 | S&F in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same, complete all as specified and as directed. |
| 108 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 109 | S&F galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed |
| 110 | M & L for refixing of steel old tubing 15 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor, complete all as specified and as directed. |
| 111 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 112 | S&F galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed |
| 113 | M & L for refixing of steel old tubing 20 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor, complete all as specified and as directed. |
| 114 | Dismantling of water tanks any type of capacity exc 250 ltrs n-exc500 ltrs and removing to store complete all as directed. |
| 115 | S&F rotational moulded polye-thylene water storage tanks, 500 litre capacity antimicrobial, triple layer white color (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including 20mm dia float valve all as specified in SSR Part I, fixed in repairs complete all as specified & directed. |
| 116 | Dismantling of water tanks any type of capacity exc 500 ltrs n-exc1000 ltrs and removing to store complete all as directed. |
| 117 | S&F rotational moulded polye-thylene water storage tanks, 1000 litre capacity antimicrobial, triple layer white color(cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including 20mm dia float valve all as specified in SSR Part I, fixed in repairs complete all as specified and as directed. |
| 118 | Dismantling of water tanks any type of capacity exc 1000 ltrs n-exc2000 ltrs and removing to store,complete all as directed. |
| 119 | S&F rotational moulded polye-thylene water storage tanks, 2000 litre capacity antimicrobial, triple layer white color(cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including float valve all as specified in SSR Part I, fixed in repairs complete all as specified & directed. |
| 120 | S&F in repair 20mm bore PVC ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe , complete all as specified and as directed. |
| 121 | S&F in repair for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and as directed. |
| 122 | S&F in repairs HDPE PVC lid (cover) for 500/1000 ltrs capacity PVC tank, complete all as specified and as directed. |
| 123 | Cleaning of over head tank RCC / PVC of any description and capacity exceeding 250 ltrs but not exceeding 500 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form to the entire satisfaction of Engineer in charge including disconnecting, opening and reconnecting GI tubing & fittings as per site requirement, complete all as specified and as directed. Note:-Date of Cleaning to be written on the Tank with white Paint.(Size of alphabet 50mm with stencil) |
| 124 | Cleaning of over head tank of any description and capacity exceeding 500 ltrs but not exceeding 1000 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form including opening and reconnecting with GI tubing as site requirement, complete all as specified and as directed. Note:-Date of Cleaning to be written on the Tank with white Paint (Size of alphabet 50mm with stencil) |
| 125 | Cleaning of over head tank of any description and capacity exceeding 1000 ltrs but not exceeding 2000 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form including opening and reconnecting with GI tubing as site requirement, complete all as specified and as directed. Note:-Date of Cleaning to be written on the Tank with white Paint (Size of alphabet 50mm with stencil) |
| 126 | Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 15mm complete all as specified |
| 127 | Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 20mm complete all as specified |
| 128 | S&F for CP 15mm dia half turn Knobs for Conceled stop cocks, Bib cocks and angle valves complete all as specified and as directed. |
| 129 | S&F for CP 15mm dia full turn Knobs for Conceled stop cocks, Bib cocks and angle valves complete all as specified and as directed. |
| 130 | S&F in repairs CI Bends (any radious) diminishing pieces or tappers 75 mm dia, complete all as specified and as directed. |
| 131 | S&F in repairs CI Bends (any radious) diminishing pieces or tappers 100mm dia, complete all as specified and as directed. |
| 132 | S&F in repairs cast iron spum type pipe 75 mm dia fixed to walls etc, complete all as specified and as directed. |
| 133 | S&F in repairs cast iron spum type pipe 100 mm dia fixed to walls etc, complete all as specified and as directed. |
| 134 | S&F for 110 mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 135 | S&F for 75 mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 136 | S&F for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed |
| 137 | S&F for 110 mm dia PVC (SWR) bends any radius complete all as specified and directed |
| 138 | S&F in repairs cast iron oval access door plates with nut and wahsers suitable for 75 mm dia CI waste pipes upto four storey height, complete all as specified and as directed. |
| 139 | S&F in repairs cast iron oval access door plates with nut and wahsers suitable for 100 mm dia CI waste pipes upto four storey height, complete all as specified and as directed. |
| 140 | Cleaning blockage in rain water pipe by removing the CI grating and rodding etc & removing & cleaning and refixing old CI grating in position in cement mortar 1:6, complete all as specified and as directed. |
| 141 | S & F for Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed shutter EWR Sec 50mm x 20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1. Four Nos for each window including following fittings welded to framed shutter :-(a) Holdfasts 150mm long 12mm x 3mm made to shape per window. (b) Handle of Z Sec 20mm x 25mm, 100mm long per leaf.(c) MS tower bolt 150mm long per leaf., complete all as specified and as directed. |
| 142 | Ditto all as per ser item No 141 above, but without sash bar shutters , complete all as specified and as directed. Note :- wire gauzed shall be measured and paid for separately |
| 143 | Ditto all as per ser item No 141 here in before but fixed type complete all as specified and as directed.Note :- glass pane shall be measured and paid for separately, |
| 144 | S&F clean swan Second class soft-wood as in scantlings as in timber framed , complete all as specified and as directed. |
| 145 | Dismantling wall panneling/ ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as directed. |
| 146 | S&F of Providing and fixing HPSC PVC laminated one side Board 6mm thick in ceiling fixed with as per manufacturers instructions purpose, 60 X 60 cm size fixed with powder coated Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including necessary GI wire hangers 2 mm dia for securing frame work to ceiling , and also including necessary notching complete complete all as specified and as directed. |
| 147 | M&L for providing and fixing 12mm thick Gypsum board in ceilling fixed with screw as per manufacturer's instructions. |
| 148 | Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings, complete all as directed. |
| 149 | M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof walls etc,fixed with L or J type hooks bolts complete all as specified and as directed. |
| 150 | S& F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 151 | Dismantling wroght iron or mild steel work of any description not oterwise provide for, complete all as directed. |
| 152 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and and connecting platesguides for sliding doors; fixed with angle cleats or otherrunning rails, complete all as specified and as directed. |
| 153 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and as directed. |
| 154 | S&F in repair, bib taps, brass, fancy type,chromium plated for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed. |
| 155 | S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed. |
| 156 | S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)., complete all as specified and as directed. |
| 157 | S&F Angle Valve/ stop valves 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipes or for unions complete, fixed in repairs, complete all as specified and as directed. |
| 158 | S&F stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 159 | S&F in repairs PVC internal fittings for low level flushing cistern, complete all as specified and as directed. |
| 160 | S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified |
| 161 | S&F in repair brass chromium plated water jet with flexible tube of suitable length fixed on EWC, complete all as specified and as directed. |
| 162 | S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and as directed. |
| 163 | S&F in repairs toilet cabinet made out of white acrylic sheet 1.50 mm thick of size 450 x 300 x 90 mm with looking mirror 450 x 270 mm fixed on the shutter and with suitable shelving arrangement in replacement of existing wooden cabinet/ mirror and repairing the disturbed surface to match with existing, complete all as specified and as directed. |
| 164 | S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern, complete all as specified and as directed. |
| 165 | S&F in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe complete all as specified and as directed. |
| 166 | S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm , complete all as specified and as directed.. |
| 167 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bendetc. complete all as specified and directed . |
| 168 | S&F for chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and as directed. |
| 169 | S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower with & including hand shower ( health faucet) ABS body including 8 mm dia flexible tube 1 mtr long & wall hook complete all as specified. |
| 170 | S&F Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality all as specified |
| 171 | S&F in repairs GI fittings like socket elbow, tee, nipple etc suitable for 15mm bore pipe complete all as specified and directed by the Engr-in-Charge. |
| 172 | S&F in repairs GI fittings like socket elbow, tee, nipple etc suitable for 20mm bore pipe complete all as directed by the Engr-in-Charge. |
| 173 | S&F in repairs GIunion socket suitable for 15mm bore dia pipe complete all as specified and as directed. |
| 174 | S&F in repairs GI union socket suitable for 20mm bore dia pipe complete all as specified and as directed. |
| 175 | S&F for hollow PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive frame complete all as specified and as directed. |
| 176 | S&F 5mm thick pvc sheet fillet of width 35mm for wall panneling inclusive of fixing on to wall to make pvc frame as per specification and drawing, |
| 177 | M&L for providing 35mm thick (Meaured solid) Precast cement concrete louvers and jallis in PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) including all mouldings but (excluding frames) set in cement mortar (1:4) complete all as specified and as directed. |
| 178 | S&F plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device, complete all as specified and as directed. |
| 179 | S&F in repairs PVC bend for low level flushing cistern, complete all as specified and as directed. |
| 180 | S&F in reapir Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by the Engr-in-Charge, fixed in repairs. |
| 181 | S&F in repair Tubular towel rail 20mm dia brass chromium plated, complete all as specified and as directed. |
| 182 | S&F in repair Soap dish, vitreous China white, approx complete all as specified and as directed. |
| 183 | S&F in repair ,one piece WATER closet with integrated cistern with soft close, including suitable seat cover and twin flush fittings of any colour, complete all as specified and as directed. |
| 184 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender