|
| 1 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 2 | S&F in repairs, for ornamental and intricate design framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 4 | S&F in repairs, MS framed work for ornamental and intricate design such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed. |
| 5 | M & L for preparation of New Steel Painted surfaces of steel and iron work of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over one coat of red oxide complete all as specified and as directed. |
| 6 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided and complete all as specified and as directed. |
| 7 | M&L for RCC M-25(20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and as directed. |
| 8 | M & L for RCC M-25 Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed. |
| 9 | M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed |
| 10 | M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed |
| 11 | M&L for flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished surface of concrete all as specified & all as directed. |
| 12 | M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified and as directed. |
| 13 | M&L for 18 -20mm thick Black Granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface pigment to match with shade of stone including demolition of old tiles/stone, rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges complete all as specified and directed. |
| 14 | Taking down cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed. |
| 15 | M&L for rendring 15 mm thick on fair faces of brick work on wall surfaces in CM 1:4 finished even and smooth without using extra cement Complete all as specified and directed |
| 16 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 17 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and including 2 mm Thick wall putty over new/Old surfaces using roller for painting complete all as specified and as directed. |
| 18 | M&L for preparation of Old plastered or unplastered surfaces of wall and apply two coat of cement base paint to walls including repair with 2 mm thick putty where ever required as per direction of Engr-in-charge complete all as specified and directed. |
| 19 | M & L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified ands directed. |
| 20 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed |
| 21 | M & L for Type D2 1:4:8 (40 mm graded aggregat e) Cement concrete in in foundations,filling and mass concrete complete all as specified and as directed. |
| 22 | M & L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and as directed. |
| 23 | M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and direcetd. |
| 24 | M&L for Brickwork with subclass Half bricks `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 bricks complete all as specified and as directed. |
| 25 | M & L in repairs for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 50mm thick (measured solid including reinforcement), Set in cement mortar 1:4 including demolition of old jallies complete all as specified and as directed. |
| 26 | M& L for Broken glass coping on top of walls built in CM 1:3 bricks complete all as specified and as directed. |
| 27 | M & L For TypeB1 1:2:4 (20mm graded graded graded aggregate) Providing precastcement concrete in window or door cills, lintels,bressumers, steps,quoin blocks (for use with ma sonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed. |
| 28 | M & L for Type C2 1:3:6 (40 mm graded aggregat e) Cement concrete in surface channels and drains complete all as specified and as directed. |
| 29 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed. |
| 30 | Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for, complete all as specified and Directed |
| 31 | M & L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as sub base complete all as specified and as directed. |
| 32 | M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 33 | M&L for chequered cement concrete colour tiles size 300mm cmx300mmx30 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified. |
| 34 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as floor,bed block for post/struts etc complete all as specified and directed. |
| 35 | Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in natural ground complete all as specified and as directed. |
| 36 | Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and as directed. |
| 37 | M&L for PCC 1;4;8 type D 2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed. |
| 38 | S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 39 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 40 | Supply only MS galvanised chain link fencing mesh (weight not less than 4kg/sqm) complete all as specified and directed. |
| 41 | Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule complete all as specified and as directed. |
| 42 | S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. |
| 43 | S&F mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed. |
| 44 | Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and as directed. |
| 45 | M&L for 6mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed. |
| 46 | S&F plain galvanised 0.63mm, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings ( length & girth as fixed) with grade of zinc coating 275 complete all as specified. |
| 47 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 48 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and as directed. |
| 49 | M&L for type B1 1:2:4(20mm graded aggregate) precast cement concrete block masonry with solid blocks exc.10 cm in width and setting in mortar complete all as specified and directed. |
| 50 | M & L for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 90-100mm thick (measured solid) including reinforcement, Set in cement mortar 1:4 including demolition of old jallies complete all as specified and as directed. |
| 51 | S&F concentrina razor wire coil for fencing dia not less than 0.45cm including all necessary fixing with accessories complete all as specified and directed. Please Enable Macros to View BoQ information |
