|
| 1 | M & L for repair to joint leakage of DI pipe line of 100 mm to 150mm dia , by cocking and inserting extra lead/gasket/ rubber sheet clamp , nut bolts etc. and any other material required at site for making good/ leakless the existing joint, including necessary excavation and earth work, returning filling after testing the joint complete all as specified and directed. |
| 2 | M & L for repair in leakage/ blocked GI/PVC water tubing of size 15 mm to 40 mm by using pipe nipple, union, coupling etc. and any other material required at site for making good/ leakless the existing joint, including necessary excavation and earth work, returning filling after testing the joint complete all as specified and directed. |
| 3 | M & L for repair in leakage/ blocked GI/PVC water tubing of size 50 mm to 80 mm by using pipe nipple, union, coupling, etc. and any other material required at site for making good/ leakless the existing joint, including necessary excavation and earth work, returning filling after testing the joint complete all as specified and directed.Note for Item Ser No 01 to 03:- If not attending/ rectification of complaint same day if found noticed the recovery shall be made Rs 500/- per day from contractor bill till complete the job. |
| 4 | M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set from existing bore well approx depth varying from 130 m to 160 m with all accessories and transporting to authorized workshop for rewinding and after overhauling / rewinding, re-lowering the pump set in bore well with all accessories, including making connection with existing starter and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. |
| 5 | M & L for rewinding of 3 Phase, 25/35 HP submersible electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 6 | M & L for rewinding of 3 Phase, 45 HP submersible electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 7 | M & L for replacement of old rusted GI borewell pumping set column pie with new 3\\" dia UPVC heavy duty column pipe coupler type 3 mtr long ISI marked 30 Kg/cm2 with an adequate factor of safety high torque resistant locking system and a specially designed rubber “O” ring , column pipes have been designed to withstand system load comprising the weight of the pump, water and pipes with an adequate factor of safety complete all as specified and directed. (Prince/ finolex/Supreme/Astral) |
| 8 | M & L for replacement PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 16 Sqmm 3 core complete all as specified and directed. |
| 9 | M & L for disconnecting and taking up/down 2.0/3.0 HP capacity centrifugal /mono-block pump set of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, Mechanical seal, pump gland, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces, rewinding the motor with superior quality enameled copper winding wire of suitable gauge, numbers of turns and coils including insulating material such as sleeves, lathorised fibe glass, cotton/PVC tape varnishing etc, reassembling, refixing and testing the motor at site on full load complete all as specified and directed by Engr-In-Charge. |
| 10 | M & L for disconnecting and taking up/down 5.0/7.5 HP capacity centrifugal /mono-block pump set of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, Mechanical seal, pump gland, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces, rewinding the motor with superior quality enameled copper winding wire of suitable gauge, numbers of turns and coils including insulating material such as sleeves, lathorised fibe glass, cotton/PVC tape varnishing etc, reassembling, refixing and testing the motor at site on full load complete all as specified and directed by Engr-In-Charge. |
| 11 | M & L for disconnecting and taking up/down 15/30 HP capacity centrifugal /mono-block pump set of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, Mechanical seal, pump gland, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces, rewinding the motor with superior quality enameled copper winding wire of suitable gauge, numbers of turns and coils including insulating material such as sleeves, lathorised fibe glass, cotton/PVC tape varnishing etc, reassembling, refixing and testing the motor at site on full load complete all as specified and directed by Engr-In-Charge. |
| 12 | M & L for rewinding of 3 Phase, 2.0/3.0 HP capacity centrifugal /mono-block pump electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 13 | M & L for rewinding of 3 Phase, 5.0/7.5 HP capacity centrifugal /mono-block pump electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 14 | M & L for rewinding of 3 Phase, 15 HP capacity centrifugal /mono-block pump electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 15 | M & L for rewinding of 3 Phase, 30 HP capacity centrifugal /mono-block pump electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, thrust bearing, and bush etc. complete all as specified and directed. |
| 16 | S & F in replacement PVC insulated and FR PVC Round Sheathed, flexible Copper Conductor 0.5 Sqmm, 6/8 core control cable, 1100 Volts, conforming to IS: 694 for water level indicator fixing on wall/ floor in PVC conduit or hanging in air with the help of GI wire complete all as specified and directed by Engineer-in-Charge |
| 17 | S & F in replacement for Water Level Indicator with Low & High Water Level Alarm conforming with 4 levels of LED indication representing 25%, 50%, 75% and 100% levels in the tank, Power ON Led indication, Audio & visual Level indication including with 4 Nos moulded silver steel contact type sensor complete suitable to existing sample |
| 18 | supply and fixing fully automatic star delta starter cap upto 7.5 HP to operate motor working on 380-440 volts, 3 phase, 50 HZ with no volt coil, over load relay & contactor , and ON -OFF push buttton, with nessary material and connectd to supply etc. suitable for fixing in the existing panel/location complete all as specified and directed. |
| 19 | All as per item No 18 here in before but capacity upto 7.5 HP to 15 HP complete all as specified and directed. |
| 20 | Supply and fixing by DOL starter cap upto 7.5 HP to operate motor working on 380-440 volts, 3phase, 50 HZ with no volt coil, over load element, and ON -OFF push buttton, with nessary material and connectd to supply etc. complete starter with original sheet encloser all as specified and as directed. |
| 21 | S & F in replacement sluice valve 80mm bore cast iron flanged & drilled both ends (ISI marked) Class PN- 1.6, Non Rising stainless steel spindle including all jointing materials and mild steel nuts, bolts, washers, welding and gasket etccomplete all as specified and directed. |
| 22 | S & F in replacement sluice valve100mm bore cast iron flanged & drilled both ends (ISI marked) Class PN- 1.6, Non Rising stainless steel spindle including all jointing materials and mild steel nuts, bolts, washers, welding and gasket etc complete all as specified and directed. |
| 23 | S & F in replacement sluice valve150mm bore cast iron flanged & drilled both ends (ISI marked) Class PN- 1.6, Non Rising stainless steel spindle including all jointing materials and mild steel nuts, bolts, washers and gasket etc complete all as specified and directed. |
| 24 | Supply & fixing in replacement old u/s non return sluice valve class PN 1.6, swing type with nitrile rubber flap, flanged ends suitable for 80/100 mm dia pipe complete all as specfied and directed. |
| 25 | Supply & fixing in replacement butterfly valve (Wafer Type), PN-1.6 with S/S Disc, neoprene rubber Lining, lever operated and S.G. Iron body suitable for 50 mm dia pipe complete all as specified and directed. |
| 26 | Supply & fixing in replacement butterfly valve (Wafer Type), PN-1.6 with S/S Disc, neoprene rubber Lining, lever operated and S.G. Iron body suitable for 80 mm dia pipe complete all as specified and directed. |
| 27 | Supply & fixing in replacement butterfly valve (Wafer Type), PN-1.6 with S/S Disc, neoprene rubber Lining, lever operated and S.G. Iron body suitable for 100 mm dia pipe complete all as specified and directed. |
| 28 | S&F in replacement of CI air release valve complete all as per existing sample |
| 29 | Supply and fix Foot Valve conforming to IS 4038, Made of cast iron material one side flange end and other side strainer and floating reinforced rubber coated ball as per exixting sample for 40 mm dia. Pipe complete all as specfied and directed. |
| 30 | Supply and fix Foot Valve conforming to IS 4038, Made of cast iron material one side flange end and other side strainer and floating reinforced rubber coated ball as per exixting sample for 80 mm dia. Pipe complete all as specfied and directed. |
| 31 | S & F in replacement of 20 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 32 | S & F in replacement of 25 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 33 | S & F in replacement of 40 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 34 | S & F in replacement of 50 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 35 | S & F in replacement of 80 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 36 | S & F in replacement of 20 mm dia medium grade GI tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 37 | S & F in replacement of old unserviceable 25 mm dia medium grade GI tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 38 | S & F in replacement of 40 mm dia medium grade GI tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 39 | S & F in replacement of 50 mm dia medium grade GI tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 40 | S & F in replacement of 80 mm dia medium grade GI tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 41 | S & F in replacement bronze ball/ gate valve with handle, screwed both ends suitable for 20mm dia iron pipe complete all as specified and directed. |
| 42 | S & F in replacement bronze ball/ gate valve with handle, screwed both ends suitable for 25mm dia iron pipe complete all as specified and directed. |
| 43 | S & F in replacement bronze ball/ gate valve with handle, screwed both ends suitable for 40mm dia iron pipe complete all as specified and directed. |
| 44 | S & F in replacement bronze ball/ gate valve with handle, screwed both ends suitable for 50mm dia iron pipe complete all as specified and directed. |
| 45 | S & F in replacement UPVC ball valve heavy duty with handle , both side socket ends suitable for 20mm dia pipe complete all as specified and directed. |
| 46 | S & F in replacement UPVC ball valve heavy duty with handle , both side socket ends suitable for 25mm dia pipe complete all as specified and directed. |
| 47 | S & F in replacement UPVC ball valve heavy duty with handle , both side socket ends suitable for 40mm dia pipe complete all as specified and directed. |
| 48 | S & F in replacement UPVC ball valve heavy duty with handle , both side socket ends suitable for 50mm dia pipe complete all as specified and directed. |
| 49 | Supply and fixing in replacement old u/s Pressure gauge 4\\"dial 0-14 kgs rating complete all as specfied and directed. |
| 50 | Supply only Calcium Hypo Chlorite 65 to 70% (calcium based granular) disinfectant for water treatment is sealed packing of 45 Kg HDPE jars to MES store yard as directed by Engr-in-Charge. Make of product : As per approved by E-in-C Branch or earlier guide line/policy letter. |
| 51 | M & L in replacement for fixing valve pit cover of suitable size to existing made of 3mm thick MS sheet/plate including provision of hinges, handle and locking arrangement including 40 x40 x 4mm iron frame fixed or top of valve pit , including two coat of anti-corrosive paint over a coat of red oxide primer complete all as specified and directed. |
| 52 | M & L of CI/DI fittings upto 150mm bore such as bends (any type radius and angle) Tappers (any type straight, bend, increasing, decreasing or double socket etc), Tee , single branch, Y junction, double branch, connecting pieces one end flanged and other socket or spigot and bell mouth pieces, Collars, Caps and plugs etc or including dismantling old one complete all as specified and directed. |
| 53 | Comprehensive maintenance and servicing of chlorine dosing equipment self priming, having discharge capacity up to 5 Ltrs/ Hour of any make and carry out repair/replacement of defective minor spares parts i.e. spring, oil seal, pan head screw, circlip, Stroke knob and nut, bolt and washer etc. including cleaning, washing/reassembling the plants and testing after repair complete all as directed by Engr-in-charge Note : (i) Defective major components/spares if required to be replaced shall be measured and paid as supply only under respective item 52 to 54 here-in-after and labour element included in this item for replacement ii) All items being spare parts as under will be replaced as required as per cat part or as per existing sample to shoot the equipment for smooth functioning. (iii) The rate quoted by the tenderer includes cost of maint / servicing of above said each plant ones in a quarterly visits and emergency callout as when required till the date of completion of work. |
| 54 | Supply only PVC diaphragm with 'O' ring head for chlorine dosing complete all as specified and directed. |
| 55 | Supply only suction/ discharge /non return valve up to 5 ltrs/Hr for chlorine dosing pump complete all as specified and directed. |
| 56 | Supply only Clorine dosing pipe as per existing sample complete all as specified and directed. |
| 57 | M & L for replacement DI pipe (spun) 100mm dia class K7 in any length with special fitting laid in trenches/surface complete all as specified and as directed . |
| 58 | M & L for replacement DI pipe (spun) 150mm dia class K7 in any length with special fitting laid in trenches/surface complete all as specified and as directed. Note for 55 to 56:- Earth work will be measured and paid separately under relevant item of sch. |
| 59 | Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/ loose soil for taking up/ laying cable/pipe etc completed all as apecified and directed. |
| 60 | Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft/ loose soil complete all as specified and directed. |
| 61 | Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and directed. |
| 62 | M&L for preparation of water pipe line (outer surfaces) for painting and applying two coats synthetic enamel paint as per existing colour with showing arrow in water flowing direction in white colour complete all as specified and directed. |
| 63 | M & L for Cleaning of fire water static water tank of capacity 20000 litre , by draining out storage water completely with mud pump or throeing out manually with buckets and cleaning of inner surface of bottom and walls of tank by removing complete accumulated sludge/ mud, dirt etc with depositing distance not exceeding 50 metre complete all as specified and directed. |
| 64 | M & L for Cleaning of clear water semi underground sump of capacity 25000 Gln at sector-27 & comn flt pumphouse, by draining out storage water completely with mud pump or throeing out manually with buckets and cleaning of inner surface of bottom and walls of tank by removing complete accumulated sludge/ mud, dirt etc with wire brush and finally washing with fresh water and disinfecting the reservoir with 2% solution of potassium permaganate including writing date of cleaning with white synthetic enamel paint and removing sludge scale mud etc to a distance not exceeding 50 metre and depostting complete all as specified and directed. |
| 65 | All as above item No 64 here in before but 50000 Gln at Sector 25 complete all as specified and directed. |
| 66 | All as above item No 64 but here in before but 50000 Gln at Comn Flt complete all as specified and directed. |
| 67 | M & L for Cleaning of RCC overhead reservoir of capacity 25000 gallons at 20 metre staging, by draining out storage water completely with mud pump or throwing out manually with buckets and cleaning of inner surface of bottom and walls of tank by removing complete accumulated sludge/ mud, dirt etc with wire brush and finally washing with fresh water and disinfecting the reservoir with 2% solution of potassium permaganate including writing date of cleaning with white synthetic enamel paint and removing sludge scale mud etc to a distance not exceeding 50 metre and depositing complete all as specified and directed. |
| 68 | S&F in replacement of 3 layer borosilicate glass tube with silicon ring suitable to existing sample tube type solar water heaters complete all as specified and directed. |
| 69 | S&F in replacement of 3 KW electric back up heater with thermostat (ISI approved) with pressure release valve 31.75 mm dia complete all as specified and directed. |
| 70 | Testing of Bore well water/ RO water/ civil authorities (Half yearly) analysis the following parameter as per IS 10500 : 2000 through Govt. approved agency:-(a) Physicochemical parameters of water/ eflluent sample(b) Bactoriological test of water sample.(c) Metals (Expect Hg, As & Se).(d) Pesticides. |
| 71 | Servicing and non comprehencive annual maintenance of RO plant of 5000 ltr/hr capacity (Make-ion exchange) with authorised service provider of ion exchange visit every month in any working days and look the performance, back wash the filter at regular intervals, check the anti scalant and add the chemical as required,cleaning of sediementation filter,cleaning of cartridge and membrane,check of control panel and system pressure and RO element for proper operation of the system, Seting the PH, TDS of water at permissible level including testing of water after repair of RO plant complete the satisfaction of Engr-in-Charge. Note:- (a) Defective major components/spares if required to be replaced shall be measured and paid as supply only under respective item 3 to 15 here-in-after and labour element included in this item for replacement .(b) The rate quoted by the tenderer includes cost of maint / servicing of above said each plant ones in a month visits and emergency callout as when required till the date of completion of work.(c) Servicing should be done by OEM/authorized agency and not by any local mechanic(d) Unwanted delay in attending/ rectification of complaint if noticed the recovery shall be made Rs 1000/- per day from contractor bill till complete the job. |
| 72 | Supply only in repairs Jumbo filter 20\\" for 5000 Ltr RO plant complete all as specified and directed. |
| 73 | Supply only in repairs anti-scalanent chemical for 5000 Ltr RO plant complete all as specified and directed. |
| 74 | Supply only in repairs membrane hydra for 5000 Ltr RO plant complete all as specified and directed. |
| 75 | Supply only in repairs UV system for 5000 ltr RO plant complete all as specified and directed. |
| 76 | Supply only in repairs multi port valve suitable for existing 5000 Ltr plant complete all as specified and directed. |
| 77 | Supply only in repairs high pressure switch suitable for 5000 ltrs RO plant complete all as specified and directed. |
| 78 | Supply only in repairs low pressure switch suitable for 5000 ltrs RO plant complete all as specified and directed. |
| 79 | Supply only in repairs solenoid valve for 5000 Ltr RO plant complete all as specified and directed. |
| 80 | Supply only in repairs multi filter housing suitable for existing 5000 ltr RO plant complete all as specified and directed. |
| 81 | Supply only in repairs controler suitable to existing 5000 ltr RO plant sample complete all as specified and directed. |
| 82 | Supply only vessel of existing make suitable for 5000 ltrs RO plant complete all as specified and directed. |
| 83 | Supply and replacement of chorine powder dosing pump of capacity 0- 20 LPH as per existing sample dosing pump complete all as specified & directed. |
| 84 | M & L for topup and filling of 2mm size quartz sand in pressure water sand filter complete all as directed. |
| 85 | Comprehensive maintenance/servicing of RO plant 50 / 60 LPH capacity including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set, and if any other required minor spare parts i.e RO connection pipe with fixing accessories, RO plug charger, wire , screw, nut, bolts etc at site for smooth functioning of RO plant shall be provided by contractor without any cost . Seting the PH, TDS of water at permissible level including testing of water after repair of RO plant complete the satisfaction of Engr-in-Charge. Note:- (a) Defective major components/spares if required to be replaced shall be measured and paid as supply only under respective item 67 to 79 here-in-after and labour element included in this item for replacement .(b) The rate quoted by the tenderer includes cost of maint / servicing of above said each plant ones in a quaterly visits and emergency callout as when required till the date of completion of work.(c) Servicing should be done by OEM/authorized agency and not by any local mechanic. (d) Unwanted delay in attending/ rectification of complaint if noticed the recovery shall be made Rs 500/- per day from contractor bill till complete the job |
| 86 | Supply only sediment filter 6000 ltr water filtration capcity as per exiting sample for 50/ 60 LPH RO plants complete all as specified and directed. |
| 87 | Supply only PP filter 6000 ltr water filtration capcity as per exiting sample for 50/60 LPH RO plants complete all as specified and directed. |
| 88 | Supply only RO membrane 300 LPD water filtration capcity as per exiting sample for 50/60 LPH RO plant complete all as specified and directed. |
| 89 | Supply only RO membrane 1812 with housing as per exiting sample for 50/60 LPH RO plant complete all as specified and directed. |
| 90 | Supply only RO membrane housing as per exiting sample for 50/60 lts RO plant complete all as specified and directed. |
| 91 | Supply only carbon filter as per exiting sample for 50/60 ltrs RO plant complete all as specified and directed. |
| 92 | Supply only low pressure /High pressure DC switch for 60/50 RO plant complete all as specified and directed. |
| 93 | Supply only strainer as per exiting sample for 50/60 Ltrs RO plant complete all as specified and directed. |
| 94 | Supply only SMPS as per exiting sample for 50/60 Ltrs RO plant complete all as specified and directed. |
| 95 | Supply only antiscalant chemical for 50/60 ltrs Plant complete all as specified and directed. |
| 96 | Supply only solenoid valve as per exiting sample for 60/50 ltr RO plant complete all as specified and directed. |
| 97 | Supply only TDS adjuster as per exiting sample for 50/60 Ltrs RO plant complete all as specified and directed. |
| 98 | Supply only booster pump 24/48V DC as per exiting sample for 50/60 Ltrs RO plant complete all as specified and directed. |
| 99 | Comprehenesive maintainace/Servicing and testing of following RO plant/system including washing, cleaning of sedimentation filter, disinfection process,servicing of pressure pumping set and dosing unit complete so as to supply qualitative water at permisssible level of TDS( 50-80) Note:- (a) Sphare required for replacement will measured and paid seprately under respective items here in schedule.(b) The rate quoted by the contractor incliudes cost of maint/servicing of above said RO once in a period of 90 days till the time of completion of work. (c ) Rate include of replacement of pars day during currency of contract as and when directed by Engineer- in - charge (d) Servicing should be done by OEM/Autorised agency and not by any local mechanic.(e) Contractor shall be produce all purchase voucher and test certificate to Engr in Charge before RAR. |
| 100 | RO plant 50 Ltr capacity at sector 25 ( 03 Nos) complete all as specified and directed. |
| 101 | RO plant 110 Ltr capacity at hanger sector 27 ( 01 Nos) complete all as specified and directed. |
| 102 | RO plant 400 Ltr capacity at sector 25 ( 03 Nos) complete all as specified and directed. |
| 103 | Supply only sediment filter as existing for 50 ltr RO plants complete all as specified and directed. |
| 104 | Supply only RO membrane as existing for 50 Ltrs RO plant complete all as specified and directed. |
| 105 | Supply only RO membrane 80 GPD as existing 110 Ltrs RO plant complete all as specified and directed. |
| 106 | Supply only RO membrane Housing for 400 Ltrs RO plan complete all as specified and directed. |
| 107 | Supply only carbon filter for 50 Ltrs RO plant complete all as specified and directed. |
| 108 | Supply only 1/4 Pipe for 50 Ltrs RO plant complete all as specified and directed. |
| 109 | Supply only low pressure /High pressure DC switch for 50 RO plant complete all as specified and directed. |
| 110 | Supply only strainer for 50 Ltrs RO pla complete all as specified and directed. |
| 111 | Supply only antiscalant chemical complete all as specified and directed. |
| 112 | Supply only chloroscope (range-0.1 ppm to 2.0 ppm) complete all as specified and directed. |
| 113 | Supply only dosing pump safety box with lock and key arrangement complete all as specified and directed. |
| 114 | supply only safety valve for RO plant complete all as specified and directed. |
| 115 | supply only booster pump suitable for 50/80 ltr RO plant complete all as specified and directed. |
| 116 | Supply only SMPS power supply suitable for 50 Ltr RO plant complete all as specified and directed. |
| 117 | Supply only control module for 50 ltr RO plant complete all as specified and directed. |
| 118 | M & L for making servicable old UNSV motor starter of any type carrying out repair and with replacement of defective minor sphare parts such as contctor , burn control copper cable , insulator ,terminal block , copper thimbles etc or if any other required minor at site for including testing to ensure efficient and smooth functioning of starter complete all as specified and directed. Note: - Defective major components/ Sphare if required to be paid under relevent items. |
| 119 | Supply only power contactor 3 pole 18/25 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed. |
| 120 | Supply only power contactor 3 pole 32/40 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed. |
| 121 | Supply only add on aux contact block as per existing sample complete all as specfied and directed |
| 122 | Supply only timer new timer new timer suitable to existing sample for star delta motor starter complete allas directed |
| 123 | Supply only single phase preventer as per existing sample complete all as direceted. |
| 124 | Supply only over load relay of range 20-32 Amps or as per existing sample Complete all as specfified. |
| 125 | Supply only over load relay of range 36-60 Amps or as per existing sample Complete all as specfified. |
| 126 | Supply only ON/ OFF, Start/stop push button suitable size /colour and rating to existing one complete including connection and testing complete all as specfied and directed. |
| 127 | Supply and fix in replacement of old u/s digital Ammeter 3 Phase with suitable rating to existing CT complete including connection & testing complete all as specified and directed. |
| 128 | Supply and fix in replacement of old u/s digital Voltmeter 3 Phase with suitable rating to existing CT complete including connection & testing complete all as specified and directed. |
| 129 | M & L for replacement of old u/s indication lamps with LED type indication lamps with showing Red, Yellow and green colour suitable for 240 volt AC supply as per existing size complete including connection & testing complete all as specfied and directed. |
| 130 | M & L in repacement of old unsv rubber Mat with rubber new Rubber Mat suitable for LT panel of size 2M x 1M X 15MM thick , ISI marked complete all as specfied and directed by Engr In Charge |
| 131 | M & L for making of installation name board made from 5 MM thick acrylic sheet os size 1.5m length and 1 mtr width including written in english Capital letter as per approved pattern and necessary fixing arrangement of 50 mm dia SS 304 grade including the frame , vertical pole not less then 2 Mtr with necessary PCC work all as specfied and directed by Engr in Charge |
| 132 | S & F in replacement star rubber coupling suitable for 30 HP motor pump as per existing sample complete all as specified and directed. |
| 133 | S & F in replacement star rubber coupling suitable for 15 HP motor pump as per existing sample complete all as specified and directed. |
| 134 | S & F in replacement star rubber coupling suitable for 7.5 HP motor pump as per existing sample complete all as specified and directed. |
| 135 | Supply and fix in replacement of old u/s CI/MS coupling with rubber tyre as per sample of 30 HP centrifugal pump set complete all as specified and directed |
| 136 | Supply and fix in replacement of old u/s CI/MS coupling with rubber tyre as per sample of 15 HP centrifugal pump set complete all as specified and directed |
| 137 | Supply and fix in replacement of old u/s CI/MS coupling with rubber tyre as per sample of 7.5 HP centrifugal pump set complete all as specified and directed |
| 138 | M & L for masonary brick work with suitable \\"B\\" class brick straight or curved on plan to any radius in half brick thick wall buits in work for repair to valve pit or any as per site requirement with well burnt B class brick and CM 1: 4 complete all as specified and directed. |
| 139 | M & L painting of valve pit cover synthetic enammel black paint over one coat of primer after scrubbing exsiting rough paint surface all as specfied and directed. |
| 140 | Supply and fix in replacement of motor starter panel size not less then ( 900mmx900 mm x350 mm including 3 Phase Star delta starter Suitable for 30 centrifugal pump motor with suitable size of MCCB 40/63 Amp 4 pole,415 Volt , with LED indicator with all contactor, relay, wiring etc of suitable rating and size inbaded in sheet metal enclouser with proper lock and key arraggement all as specfied and directed. |
| 141 | M & L for earthing complete with GI earth plate electrode of size 600mm x600mmx 3.15 mm thick burried directly under ground vertically to a depth not less than 2.25meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including GI strip 25 x 3 mm, by means of bolts, nuts, check nuts and washeres made out of GI including protection pipe GI light grade 40 mm size and watering pipe 20 mm dia GI medium grade all as shown on plate No 3 of SSR Part-I, connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and directed. |
| 142 | M & L for Servicing of Pump house starter panel/ LT indoor/outdoor Panel/feeder pillar box any type replacing unserviceable control wiring for panle, including cleaning of bus bar and insulated with suitable colour code , indicator lamps, removing unserviceable Ammeter, Volt meter , replace with new multifunction meter, painting inside and outside of the panel with enamel paint, fixing proper hanging front and rear openings, welding of hinges including using extra sheets replacing burnt thimbles with new thimbles re-fixing of required size, incluidng re-connecting the LT cables and testing complete all as specified and directed by Engr -in- charge. Note : Items like MCCB and MCB to be measured and paid seprately under relevent item. |
| 143 | M & L for Servicing Calibration of APFC panel by cleaning, tightning of connections, setting programme,checking of CT, Control wiring including replacement of unserviceable items like indication lamps, MCB's, control wires and testing the panel to acheive power factor of 0.999(lag) all as specified and as direced by Engr-in-Charge. |
| 144 | Supply in replacement MCCBs 4 pole 100-160 Amps, 415 Volts, 25 KA adjustable type all as specified |
| 145 | Supply in replacement and replace MCCBs 4 pole 200Amps, 415 Volts, 25 KA adjustable type all as specified |
| 146 | Supply in replacement MCCBs 4 pole 250 Amps 4 pole 36 KA complete all as specified and directed. |
| 147 | Supply in replacement MCCBs MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA,all as specified |
| 148 | Supply in replacement in maintance free battery 12V, 150 AH IS15549/IEC 60896, for pump house DG set working on operational temp range upto 50 degree, efficency above 95 % all as specfied and directed. |
| 149 | Supply and fix in repair MCB 4 pole of capacity 40 Amps \\"C\\" curve , 415 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed. |
| 150 | Supply and fix in repair MCB 4 pole of capacity 63 Amps \\"C\\" curve , 415 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed. |
| 151 | Supply , Laying , connecting,charging, testing and commissioning LT cable electric , XLPE insulated, PVC bedded , galvanized steel strip armoured ,pvc sheathed, heavy duty, electric cable 1100 volt grade with stranded aluminum conductor conforming to IS :7098 , laid in trenches/ducts/wall / floor / pipes/ poles including cable gland brass of appropriate size, aluminium lugs , pvc sleeve etc complete all as directed by Enginner in -Charge for following sizes of cables :- |
| 152 | 50 sq mm 3.5 core complete all as specified and directed. |
| 153 | 25 sq mm 3.5 core complete all as specified and directed. |
| 154 | 16 sq mm 4 core complete all as specified and directed. |
| 155 | M & L for carrying out \\"B\\" check- Replacement of diesel filter assembly, bypass filter assembly complete with engine oil filters, air filters including necessary \\"O\\" rings, etc. Draining out unserviceable engine oil from sump, filling of new oil and checking the proper functiong of the lubrication and coolling system for the D.G.set of various capacity and location as under Note:(a) The cost of Engine oil will be measured seperately under relevent item of BOQ . ( b) \\"B\\" check to be carried out every 6 monthly or twice in contract period. |
| 156 | 250 KVA DG Set , at sector 9 Ghandinagar complete all as specified and directed. |
| 157 | 200 KVA DG Set , at sector 25 Ghandinagar complete all as specified and directed. |
| 158 | 160 KVA DG Set, at sector Comn Flt Ahmedabad complete all as specified and directed. |
| 159 | 75 KVA DG set at Sector 25 pump house complete all as specified and directed. |
| 160 | 50 KVA DG set at Sector 27 complete all as specified and directed. |
| 161 | 20/25 KVA DG set at Sec 25, 27 and Comn Flt complete all as specified and directed. |
| 162 | Supply only of Engine oil suitable for above DG Set as per recommanded by manufacturer complete all as specified and directed. Make: Kirloskar oil / Survo Super / Gulf Lube |
| 163 | Supply only coolant Additive 5 Lt Pack complete all as specified and directed. |
| 164 | Supply and replace copper conductor of size 50 Sqmm PVC insulated complete all as specified and directed. |
| 165 | Supply and replace battery terminal (copper) incl brazing with multistranded copper conductor complete all as specified and directed. |
| 166 | Supply and replace ESU (Engine safety Unit) of DG Set 250/200/160 KVA complete all as specified and directed. |
| 167 | Supply and replace ESU (Engine safety Unit) of DG Set 75, 50,40,10 KVA complete all as specified and directed. |
| 168 | Material & labour for taking down the fuel injection pump of 250/200/160/KVA of DG set for service & calibration and checking the serviceability of FIP complete all as specified and directed. |
| 169 | Material & labour for taking down the fuel injection pump of 75/50/20 KVA of DG set for service & calibration and checking the serviceability of FIP complete all as specified and directed. |
| 170 | M&L servicing/ repair of dynamo including replacement of carbon brush, brush holders, bushes/bearings, varnishing, scaling etc complete all as specified and directed. |
| 171 | M & L for Dismantling the leaking radiator from 250/200/160KVA DG set and transporting to the workshop or carry welding eqpt to site for repair by means of gas welding / brazing the copper tubes and reassembleing the same at the workshop and back to the site and refxing in the engine and testing complete and all as directed |
| 172 | M & L for Dismantling the leaking radiator from 75/50/20 KVA DG set and transporting to the workshop or carry welding eqpt to site for repair by means of gas welding / brazing the copper tubes and reassembleing the same at the workshop and back to the site and refxing in the engine and testing complete and all as directed |
| 173 | Supply and fix in replace AVR for 250/200/160 KVA DG Set complete all as specified and directed. |
| 174 | Supply and fix in replace AVR for 75/50/20 KVA DG Set complete all as specified and directed. |
| 175 | Supply and fix in replacement of Water hose pipe with clip Set for 250/200/ 160 KVA DG Set with hose clip complete all as specified and directed. |
| 176 | Supply and replacement of Water hose pipe with clip Set for 75/50/20 DG Set with house clip complete all as specified and directed. |
| 177 | Supply and fix in replacement of water safety switch for 250/200/160 KVA DG Set complete all as specified and directed. |
| 178 | Supply and fix in replacement of water safety switch for 75/50/20 KVA DG Set complete all as specified and directed. |
| 179 | Supply and fix in replacement of Oil safety switch for 250/200/160 KVA DG Set complete all as specified and directed. |
| 180 | Supply and replacement of Oil safety switch for 75/50/20 KVA DG Set complete all as specified and directed. |
| 181 | M&L servicing/repair of turbo charger including replacement of repair kit for 160 KVA DG Set complete all as specified and directed. |
| 182 | Supply and fix in replacement of relay card for 250/200/160 KVA DG Set complete all as specified and directed. |
| 183 | Supply and fix in replacement of fan belt for 250/200/160 KVA DG Set complete all as specified and directed. |
| 184 | Supply and fix in replacement of fan belt for 75/50/20 KVA DG Set complete all as specified and directed. |
| 185 | Supply and fix in replacement of Diesel pipe for 250/200/160 KV DG Set complete all as specified and directed. |
| 186 | Supply and fix in replacement of Diesel pipe for 75/50/20 KVA DG Set complete all as specified and directed. |
| 187 | Supply only Alum ferric of best quality in packing bags as per sample complete all as specified and directed. Please Enable Macros to View BoQ information |
