|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site, complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n exc 4 sqm and removing from site, complete all as specified and directed. |
| 3 | Taking down shutter of any description area nexc. 1 Sqm removing from site, complete all as specified and directed . |
| 4 | Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm and removing from site, complete all as specified and directed . |
| 5 | S&F in repair Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 6 | S&F in repair Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 7 | S & F in repair for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and directed. |
| 8 | S&F in repair for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 9 | S&F in repair for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 10 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 11 | S&F in repair 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 12 | S&F in repair for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 13 | S&F in repair 150mm long anodised aluminium handles, cast type complete all as specified and directed. |
| 14 | S&F in repair 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 15 | S&F in repair for 20 to 25 mm dia stainless steel drapery curtain rod with brass /nickel chrom polish / designer lattos and brackets including taking out old pelmet with curtain rods complete all as specified and directed. |
| 16 | S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 17 | S& F in repair Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 18 | S&F in repair Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 complete all as specified and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately |
| 19 | S&F in repair Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately |
| 20 | M&L Sheet glass (Plain/figured) 3.00mm thick ordinary quality and glazing with oil putty complete all as specified and directed. |
| 21 | S & F in repair for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed. |
| 22 | S & F in repair galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified and directed. |
| 23 | S&F in repair Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 24 | S&F in repair Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 25 | S & F in repair for PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive, incl hasp and stable for locking purpose, etc complete all as specified and directed. |
| 26 | S&F in repair powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all specified and directed. |
| 27 | S&F in repair aluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 28 | S&F in repair Double action floor spring hydraulically regulated made up of stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete all as specified and directed. |
| 29 | S&F in repair for sheet glass palin/coloured 5.5mm mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 30 | S&F in repair PVC hallow profile 9/12mm thickness design and pattern as approved/directed at site complete all as specified and as directed. |
| 31 | S&F in repair aluminium anodised grill 6m thick fixed to aluminium window with and including 'H' type aluminium frames of size 34mm x 11mm complete all as specified and directed. |
| 32 | S& F in repair for 4 mm thick E Board claasic desinger of size 600x600mm as in false ceiling or similar work complete all as specified and directed. |
| 33 | S&F in repair PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed. |
| 34 | S & F in repairs false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanized iron section of 0.33mm thick ( galvanized @ 12 grams per sqm incl both sides ) comprising of main T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling usung galvanized mild steel items (galvanizing @ 80 grams per Sqm) ie 50mm long 8mm outer diater M-6 dash fasteners 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help complete all as specified and directed. |
| 35 | S&F in repairs POP 12mm thick Seamless calcium silicate ceiling made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing thr joints of face board with specially formullated jointing compound and 48 mm wide fibre tape to provide seamless finish with 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 36 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed. |
| 37 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. |
| 38 | M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified and directed. |
| 39 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 40 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement any height ( upto 2nd floor) including necessary scafolding complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately) |
| 41 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 42 | M&Lfor preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 3 mm thick putty on prepared surface and applying two coats of weather coat paint any height (upto 2nd floor) including necessary scafolding (Weather coat Exterior emulsion) over a coat of white water base primer complete all as specified and directed. |
| 43 | M&L preparation of new surface of wall and applying 3 mm thick wall care putty and applying two coats of plastic emulsion paint over a coat of oil based primer complete all as specified and directedNote: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 44 | S & F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed. |
| 45 | Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 46 | S& F in repair Rotational moulded Polyethylene water storage tank tripled layered 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia complete all as specified and directed. |
| 47 | S&F in repairs rotational moulded Polyethylene water storage tank tripled layered of capacity 1000 ltr (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl brass float valve 20mm dia complete all as specified and directed. |
| 48 | Disconnecting existing tanks n exc 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing etc. measured separately). |
| 49 | Disconnecting existing tanks capacity of exc 500ltr and nexc 100ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing etc. measured separately). |
| 50 | Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed. |
| 51 | All as per ser item no 50 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed. |
| 52 | S&F in repair of 15mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed ( Min Weight 15mm-142 gms) complete all as specified and directed. |
| 53 | S&F in repair of 20mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed ( Min Weight 20mm-210 gms) complete all as specified and directed. |
| 54 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed. |
| 55 | All as per ser item no 54 above but 20mm bore complete all as specified and directed. |
| 56 | S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and directed. |
| 57 | All as per ser item no 56 above but 20mm bore complete all as specified and as directed. |
| 58 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass (any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 59 | S&F 3.00 mm thick sheet glass figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass (any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 60 | Resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified and directed. |
| 61 | Resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed. |
| 62 | Removal of exisiting treatment on ceiling including preparation and applying two coat of white wash on ceiling complete all as specified and directed. |
| 63 | S & F venetian blinds with coloured flaps, guide rail, up and down rope/chain, etc complete all as specified and directed. |
| 64 | Preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 65 | Removal of existing treatment and preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 66 | Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 67 | Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 68 | M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other means,including filling depression of scrapped surface ,priming plaster and other old surface with alkali resistant priming paint and applying two coat of cement base paint complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 69 | Material and Labour for complete removal of old decorated surfaces of wall, pillasters,cornices etc by brooming down or steel wire brushing,scrapping down and washing with water. after completion of precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer including 3mm thick wall care putty and including including necessary sacfolding, complete all as specified and directed. Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item. |
| 70 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 71 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 72 | Material and labour for 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 73 | Material and labour for 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 74 | Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10cm but not exc. 20cm girth complete all as specified and directed. |
| 75 | Supply and fix in repair for 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and directed. |
| 76 | Supply and fix in repair for PVC connections pipe 15mm size, with PTMT nuts of length 600mm complete all as specified and directed. |
| 77 | S & F in repairs,15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 78 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joint any size including fixing to steel pipe or union complete all as specified and directed. |
| 79 | Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 80 | Supply and fixing in repair Fancy Type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe (ISI marked) complete all as specified and directed. |
| 81 | Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 82 | S & F in repairs, Bib tap15 mm standard of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90 gms) complete all as specified and directed. |
| 83 | M & L for 600mm x 450mm size beveled edge mirror of 6mm thick selected quality mounted on 6mm thick plywood with chromium plated screws with washer complete all as specified and directed. |
| 84 | S & F in repairs, PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete all as specified and directed. |
| 85 | S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device complete all as specified and directed. |
| 86 | S & F in repairs, Wash basins, vitreous china white (flat back type) of size 550x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 87 | S & F in repairs, Wash basins, vitreous china white (Angle back type) of size 400x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 88 | S & F in repair Vitreous china squatting pan “Orrisa” pattern of size 580mm “White” with 'P' or 'S' Trapfront or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe), connection to trap and to flushing pipe anti- syphonage pipe etc complete making good complete all as specified and directed. |
| 89 | S & F in repair Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed. (including making good to floor and fixing in repairs) |
| 90 | Material and labour for PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75/100mm dia complete all as specified and directed. |
| 91 | S & F in repair of 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface complete all as specified and directed. |
| 92 | All as per ser item No 91 above but 75 mm bore |
| 93 | S&F in repairs of glass shelf assembly corner/Straight consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 94 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore complete all as specified and directed. |
| 96 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore complete all as specified and directed. |
| 97 | S&F in repair PVC (SWR) Bends any radius for 110mm bore complete all as specified and directed. |
| 98 | S&F in repair PVC (SWR) Bends any radius for 75mm bore with oval access door complete all as specified and directed. |
| 99 | S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified and directed. |
| 100 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr complete all as specified and directed. |
| 101 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr complete all as specified and directed. |
| 102 | Supply and fixing in repair Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 103 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed. |
| 104 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 105 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 106 | M & L for Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as spd and as directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 107 | M & L for Preparation of old plastered surfces of wall and applying two coats of cement base paint over a coat of wall care putty 3mm thick complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 108 | M & L for Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as specifeid and as directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 109 | M & L for Preparation of old plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as specified and as directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 110 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 111 | M& L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as specified and directed. |
| 112 | M & L for Glazed ceramic colored tiles 600mmx300mmx 6 to 7mm thick/450mm x300 mm x 7mm,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. complete all as specified and directed. |
| 113 | Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 114 | M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough complete all as specified and directed. |
| 115 | M&L for 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement. complete all as specified and directed. |
| 116 | M & L for 20mm thick screed screed bedding in cement mortar 1:6 as in sub base complete all as specified and directed. |
| 117 | Chequered cement concrete tiles of size 30cm x 30cm x 20 to 22 mm thick glossy finish coloured and pattern in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over with grey cement and no pigment complete all as specified and directed. |
| 118 | Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as specified and directed. |
| 119 | M&L of Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface complete all as specified and directed. |
| 120 | Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc. 250m complete all as specified and directed. |
| 121 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extracomplete all as specified and directed.Note:- WPC Measured and Paid Separately. |
| 122 | Supplied only for Integral Liquid water proofing compound complete all as specified and directed. |
| 123 | M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and directed. |
| 124 | M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm. complete all as specified and directed. |
| 125 | M& L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed.Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) Fixing of APP based polymeric membrane procured from any approved manufacturer will be done by authorised persons of the same manufacturer as per provns of relevent IS. |
| 126 | Applying one coat of aluminium paint on top of APP membrane complete all as specified and directed. |
| 127 | PCC 1:2:4 type B-0 (12.50mm graded crushed stone aggregate) as in padding finished even and smooth without using extra cement complete all as specified and directed. |
| 128 | Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment complete all as specified and directed as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm. (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. Please Enable Macros to View BoQ information |
