|
| 1 | Dismantling all type of masonry excepting cement concrete plain of reinforced stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.. |
| 2 | (a) In ground floor including roof. |
| 3 | Dismantling R.C.floor, roof,beams etc. including cutting rods and removing rubbish as directed with in a lead of 75 m. including stacking of steel bars. |
| 4 | (a) In ground floor including roof. |
| 5 | Dismantling all type of plain cement concrete works, stacking serviceable materrials at site and removing rubbish as directed with in a lead of 75 m In ground floor including roof. |
| 6 | (b) above 150 mm. thick. |
| 7 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. . |
| 8 | (a) Depth of excavation not exceeding 1.500 mm. |
| 9 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete .(payment to be made on the basis of measurement of finished quantity of work). |
| 10 | (a) With earth obtained from excavation of foundation. |
| 11 | Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. |
| 12 | Cost of stone boulder 150 mm size delivered ans stacked at site. |
| 13 | (I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor. |
| 14 | (B) With N.B variety stone metal. |
| 15 | (a) 1:3:6 proportion. |
| 16 | Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site |
| 17 | In Road and Jhora Work |
| 18 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant codes. |
| 19 | (ii) River bazree. |
| 20 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. |
| 21 | (a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel. |
| 22 | SAIL/ TATA/RINL |
| 23 | Plum Concrete work with 40 % Cement Concrete with 30 mm down graded stone metal and 60% stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any. |
| 24 | (i) (1:3:6) proportion. |
| 25 | Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). |
| 26 | ( c ) 9 to 12 mm. thick approved quality ply board shuttering in any concrete work. |
| 27 | (a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor). |
| 28 | (ii) Grill weighing above 16 kg./sq.m.and above . |
| 29 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 30 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. |
| 31 | (i) with 1:6 cement mortar. |
| 32 | (a) 25 mm. thick plaster. |
| 33 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (Avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching of stone shade, including grinding and polishing as per direction of Engineer-in-charge to match with the existing work.[slurry for bidding @ 4.4kg/sq.m and pointing @ 2.0 kg/sq.m]. |
| 34 | Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to received distemper /Acrylic emulsion paint including scraping and preparing the surface thoroughly , complete as per manufactured specification and as per directions of the EIC.In ground floor. |
| 35 | (b) two coats. |
| 36 | (i) water based interior grade Acrylic primer. |
| 37 | Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:. |
| 38 | (b) two coat. |
| 39 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.Two Coats |
| 40 | Protective and decorative Acrylic exterior emulsion paint of approved quality , as per manufacture specification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.In ground floor ( two coat). |
| 41 | (a) Normal Acrylic emulaion. |
| 42 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 43 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary. |
| 44 | (b) On steel or other metal surface: . |
| 45 | (1) With super gloss (hi-gloss). |
| 46 | (iv) Two coats (with any shade except white). |
| 47 | Drilling holes of requisite diameter in R.S. joists channels, tees, plates etc. |
| 48 | (i) Dia. Above 12 mm. and depth up to 10 mm. |
| 49 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(A) clear, toughened glass conforming to IS:2553-1992 (part-II) |
| 50 | (iii) 10mm thick Please Enable Macros to View BoQ information |
