Tender For Uws Schemes In North Tripura District During The Year 2026-27/ Sh:- Remodeling Of Di Pipeline At Natunpatty Link Road Near Culvert Under Dws Sub-Division Dharmanagar.
Tender Value
7.14 Lakhs
Estimated cost
Bid Submission
03 Jul 2026
1 days left
EMD
14280
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Uws Schemes In North Tripura District During The Year 2026-27/ Sh:- Remodeling Of Di Pipeline At Natunpatty Link Road Near Culvert Under Dws Sub-Division Dharmanagar.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. A). For UPVC pipes in new worka). In all kinds of soilB). For G.I. / C.I. / D.I. pipes in new work a). In all kinds of soilii). For pipes exceeding 90 mm dia but not exceeding 300 mm dia |
| 2 | Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.iv. 150 mm dia Ductile Iron Class K-7 pipes. |
| 3 | Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and excluding the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge.i) 150 mm dia |
| 4 | Charges for cutting D.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.i) 150 mm dia |
| 5 | Providing and laying D.I. specials of class K - 12 suitable for push - on jointing as per IS : 9523 as per CPWD specification and direction of the Engineer - in - charge.i Upto 300 mm dia |
| 6 | Providing and fixing brass ferrule with C.I. cover conforming to IS :2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.ii) 15 mm nominal bore |
| 7 | Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge.i). 15 mm dia PVC /plastic bib cock |
| 8 | Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings willa) 15mm dia (ID) |
| 9 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i). 15 mm dia |
| 10 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge.i. 15 mm dia |
| 11 | Providing and fixing G.I. Nipple of medium class as per CPWD specification and direction of the Engineer - in - charge.ii. 15 mm dia 150 mm long |
| 12 | Supplying and filling in plinth under floor foundation etc with sand un( fine) from local quary with all lifts including spreading in horizontal layers watering grading to required slop ramming consolodating and compacting each lyer by using plate compctor of by any suitable method complete. |
| 13 | Providing and fixing G.I. pipes of Medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer- in - charge.A). External work. |
| 14 | i) 15 mm dia. nominal bore |
| 15 | iv) 40 mm dia. nominal bore |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size) |
| 17 | Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge. B.by manual means Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 day