|
| 1 | Item Description (Part-A) |
| 2 | Daily cleaning, upkeeping of Residential and Non-Residential Building including brooming of floor of Residential and Non-Residential Building campus, mopping of floor, skirting , cleaning of door, window, table, etc. Cleaning of toilets by sanitary materials, mopping of floor etc complete as per instruction of EIC.(By engaging minimum 09 manpower / day :(1). Block- B-Types, C-Type, D-Type: 06 Nos, (2). Pump House, Substation, Guard Room: 01 No., (3).Dispensary: 02 nos.). |
| 3 | Door to Door collection of garbage (biodegradable and non-biodegradable in separate container) from 7.00A.M to 11.00 A.M for all the blocks including Dispensary & VIP Guest House in separate container from all residential colony and segregation of garbage at dumping pit etc complete as per instruction of EIC (By engaging minimum 02 manpower / day). |
| 4 | Sweeping & cleaning of road including berms of roads and Cleaning of road side drain, back drain connecting drain incuding disposal of sludge / muck as per the instruction of EIC (By engaging minimum 03 manpower / day). |
| 5 | Carriage of domestic waste material collected from houses everyday by mechanical means small 4 wheeler vehicle including hire charges of small vehicle including driver and diesel. |
| 6 | Cleaning of inspection chambers including cleaning surrounding the chambers, removing the cover, cleaning and refixing the cover etc. |
| 7 | Cleaning of septic tanks including cleaning surrounding the septic tank removing the precast cover of septic tank, cleaning and removing sludge from the septic tank and safe disposal of sludge outside the premises, refixing the cover after thoroughly cleaning as per the instruction of EIC. |
| 8 | Removal of dead bodies of animals like cat, dog, cows etc and disposed/burried them away from the premises. |
| 9 | Daily Maintenance of Jogging Path, lawn, garden, flower beds, potted plants, plants and trees, planting of new plants/new lawns as and where required including watering, removal of weeds, wild vegetation etc, manuring, putting good earth, fertilisers, applying pesticides at varous locations etc. as per the direction of Engineer-in-Charge. (Cost of plants, manure, good earth, etc. to be paid for separately. However, cost of tools & plants, flexible pipes, fertilisers and insecticide/ pesticides are included in the item and is to be arranged by the contractor. The water supply point shall be provided at one point at each separate location by the department.). (By engaging minimum 02 manpower / day). |
| 10 | Cleaning of overhead water storage tank including removing of cover, cleaning thoroughly and disinfecting by bleaching powers and placing the cover,all complete as per the instructions of EIC. |
| 11 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe: 32mm dia |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 16 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 17 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 18 | Providing and fixing Hand shower (health faucet) with 8 mm dia, 1.2 meter long flexible tube and wall hook with N.R.V (Back flow preventer), (Make Jaquar Model- ALD-577 or Equivalent to be used) as per the direction of Engineer-In- Charge. |
| 19 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 20 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid |
| 21 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 25 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 27 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 28 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 29 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm |
| 30 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 31 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper |
| 32 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 33 | Structural steel work riveted, bolted or welded in built-up sections, trsses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 35 | Providing and applying plaster of paris putty of 2 mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 37 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said.Old work (one or more coats) |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion, single socketed pipes. 110mm dia |
| 39 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 3592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: 110mm Coupler |
| 40 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°. 75 mm bend. |
| 41 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion, single socketed pipes. 75mm dia |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -50 mm nominal dia Pipes |
| 43 | PProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -40 mm nominal dia Pipes |
| 44 | PProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work -32 mm nominal dia Pipes |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia Pipes |
| 48 | provide and fix Gun metal gate valve with CI wheel of 25mm dia |
| 49 | provide and fix Gun metal gate valve with CI wheel of 32mm dia |
| 50 | provide and fix Gun metal gate valve with CI wheel of 50mm dia |
| 51 | provide and fix ball valve of 25mm dia |
| 52 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 53 | Providing and fixing PTMT stop cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms |
| 54 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 55 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 56 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm |
| 57 | Part-B |
| 58 | Labour only for taking out of three phase submersible pumping set from the tube well with pipe line assembly ,electrical,cable ,testing etc.complete including disconnecting the electrical cable from pump & starter .3HP to 7.5 HP -Depth upto 150mtrs. |
| 59 | Labour only for lowering of three phase submersible pumping set in the tube well with pipe line assembly ,electrical,cable ,testing etc.complete including disconnecting the electrical cable from pump & starte.3HP to 7.5 HP -Depth upto 150mtrs. |
| 60 | Suppling & laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.(ii)4.0 sq mm multi strand |
| 61 | Recovery & taking out submersible pump from bore hole with the help of calxy machine & pump lowering after pump repairing .( excluding the cost of repairing) |
| 62 | Provision for Rewindidng of submerssible Motor of any diameter i/c cost of material ,labour ,transportation etc.complete in case of breakdown maintenance as per approved specification & as directed by Engineer in charge. |
| 63 | Provision for repairing of submerssible pump of any diameter i/c cost of material ,labour ,transportation etc.complete in case of breakdown maintenance as per approved specification & as directed by Engineer in charge. |
| 64 | Provision for repairing of starter /control panel i/c cost of material ,labour,transportation etc. complete as per approved specification & as directed by Engineer in charge. |
| 65 | Part-C |
| 66 | Thermal fogging operation for mosquito control by vehicle mounted machine from 5pm to 8 pm including machine cost, cost of insecticide(Cyphenothine 5%EC 10ml orpyrepherium 2% extra @ 20ml per liter of Diesel )( cost of Driver and Operator etc all should be paid by contrator as per direction of EIC.) |
| 67 | Spraying of insectiside in drains in and around the colony area, mine premises, work shop premises as per instruction of EIC. |
| 68 | Supplying of Bi-larva 25WP as per direction of EIC |
| 69 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
