Tender For Construction Of Acr, Biology Room, Chemistry Lab And Physics Lab At Higher Secondary School Warnow Distt Kupwara Advertised Cost: 63.76 Lacs.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jul 2026
0 days left
EMD
1.28 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Acr, Biology Room, Chemistry Lab And Physics Lab At Higher Secondary School Warnow Distt Kupwara Advertised Cost: 63.76 Lacs.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jul-2026 | Date | Date | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | PART (A) CIVIL PART:Earth work in excavation by mechanical means(hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in with) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting ouf excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil: |
| 2 | Providing and laying of dry stone soling by way of nallah boulders size on leveL (hand packed) watering, ramming, complete below foundation and rooms incl. carriage of all materials |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering incl. all carriages of material to site of work 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Crusher. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, . All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Crusher. Incl. all carriage upto site of work. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with, All works above plinth level upto v level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Crusher. Incl. all carriage upto site of work. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crusher incl. all carriages of material upto site of work. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. As per directions of Engineer-in-Charge. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns for mass concrete |
| 10 | Centering & Shuttering incl. strutting, propping etc. & removal of form work for walls (any thickness) including attached pilastersbuttresses, plinth and string course |
| 11 | Centering & Shuttering incl. strutting, propping etc. & removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Centering & Shuttering incl. strutting, propping etc. & removal of form work for Suspended floors, roofs, landings, balconies and access platforms. Etc |
| 13 | Supply and filling in plinth with fine sand under floors incl. watering, raming consolidations, dressing etc.incl.all carriages upto site of work complete. |
| 14 | Brick work with F.P.S bricks of class designation 7.5 in superstructure above Plinth in cement mortar in 1:6 (1 cement: 6 coarse sand) ncl. carriages of bricks upto site of work complete including extra upto floor V-level. incl. all carriages of material upto site of work. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Imported wood |
| 16 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-Ior graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked : |
| 17 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panesIncluding ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood |
| 18 | P/F Extra 3.5mm float glass pans fro doors, windows and clerestory windows frames of approved brand |
| 19 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand mortar) |
| 20 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 21 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 22 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 24 | Applying priming coat: With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 26 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 27 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate. |
| 28 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 29 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded etc as per directions of Engineer-in-Charge. |
| 30 | Providing and fixing with High rib profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, 0.50mm thick coloured sheets. Incl all carriage of material upto site of work. |
| 31 | Providing ridges/hips/valleys 600mm overall width with GS plain colour sheets with necessary fittings |
| 32 | Providing and fixing of bright finished brass hardware fittings |
| 33 | L-Drop 18'' with inbuilt Locking system |
| 34 | 250x10mm T bolt |
| 35 | 100x10mm T Bolt |
| 36 | 125 mmHandles |
| 37 | 200 mmHandles |
| 38 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer M.S. tube |
| 39 | Supply and fixing the following sizes of RIGID PVC conduits 1.8 mm thick (ISI marked) complete with accessories such as bends, junction boxes eyc in recess or on surface incl cutting chases in the walls/ floors and making good the same complete as required |
| 40 | 25mm dia RIGID PVC conduits |
| 41 | Fan junction boxes |
| 42 | Lighting Junction boxes/cases Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender