|
| 1 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed |
| 3 | All as per serial item No 02 above but except bricks complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.. |
| 5 | Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 6 | Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surface susing WPC @ 0.20 litre per 50 Kgs of weight of cement complete all as specified and directed.Note : WPC shall be measured and paid for separately. |
| 7 | Supply only liquid water proofing compound complete all as specified and directed. |
| 8 | Material and labour for two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 9 | Material and labour for one coat of cement base paint on old plastered surfaces of walls including preparation of old surface complete all as specified and directed. |
| 10 | Material and labour for PCC (1:2:4) type B-0 using 20mm graded aggregate as in coping etc including necessary form work complete all as specified and directed. |
| 11 | Dismantling of existing chain link fencing of any mesh and size incl screw, nut and bolts etc complete all as specified and directed. |
| 12 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 13 | Supply only for chain link fencing of any size made of MS galvanised wire confirming to IS-2712-2003 (GI wire confirming to IS 280-2006 having zinc coating as laid down in IS:4826 hot dipped galvanised coating on round steel wires or IS-12753 electro galvanised coating on round wires having tensile strength within 400 to 500 MPa of standard rails staining bolts etc incl provn of binding with mild steel wire not less than 0.9mm dia complete all as specified and directed. |
| 14 | Supply only pvc coating mild steel galvanised chain link fencing 3.15mm dia wire(excluding thickness of PVC coating) mesh size 50mm x 50mm pitch 50mm complete all as specified and directed.Note: Thickness of PVC coatong shall not less than 1mm and wire diameter 5.15mm thick incl pvc coating) |
| 15 | Supply and fixing for only new chain link fencing including line wires any mesh any size and to any type standards rails, straning bolts etc including provision of binding wire complete all as specified and directed. |
| 16 | Supply and fixing for mild steel screw bolts (Machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or square nut n exc 5 cm long complete all as specified and directed. |
| 17 | Supply and fixing for mild steel round bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W 432 (Gde E-250) Part-I quality -A or Fe-290 (Gde-E-165) complete all as specified and directed. |
| 18 | Material and labour for framed work as in doors or gates and framed grills made of ornamental purpose of angle, sq bars or other sections including plate, rails braces with ornamental and fabricate etc complete drilled for fixing of steel seating including prepared for hanging, sliding bolt, handle etc confirming to Fe- 290 Gde E-165 complete all as specified and directed. |
| 19 | Supply and fixing in repair for GI 2 standard barbed wire 2.24mm dia wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) inluding clearing/removal of vegetation complete all as specified and directed. |
| 20 | All as per serial item no 19.00 above but except barbed wire complete all as specified and directed. |
| 21 | All as per serial item no 19.00 above but restraining, resecuring including making good staples only complete all as specified and directed. |
| 22 | Supply and fixing in repairs for concertina coil size of dia (450mm to 900mm) and 2.64mm of dia having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 inluding clearing/removal of vegetation complete all as specified and directed. |
| 23 | Dismantling of wrought iron or MS work of any description complete all as specified and directed. |
| 24 | Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion, embedded in concrete, brick work masonry and making good disturbed ground complete all as specified and directed. |
| 25 | Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken, rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 26 | Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete complete all as specified and directed. |
| 27 | Supply and fixing for hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165;) complete all as specified and directed. |
| 28 | Material and labour for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 29 | Material and labour for preparation of old surfaces of steel of any description exc 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | Removing of vegitation growth, bushed including taking out from wall etc. and removing the rubbish n exc 50m complete all as specified and directed. |
| 31 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 32 | Material and labour for providing 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 33 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 34 | Supply and fixing for polythene film, black, 50micron laid in floors complete all as specified and directed. |
| 35 | Material and labour for cement concrete coloured chequered tiles with gery cement and pigment cement and pigment 30cm X 30cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over 20mm thick screeding of CM 1:6 complete all as specified and as directed. |
| 36 | Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base/ mass concrete complete all as specified and directed. |
| 37 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 38 | Material and labour for preparation of new concrete surfaces of any description, over 10cm width or girth and aplying two coats of synthetic enamel paint over a primer coat complete all as specified and directed Please Enable Macros to View BoQ information |
