Tender For Providing Water Supply Scheme Summerkot In Tehsil Rohru Distt Shimla (H.P) (Sh: Repair Renovation Providing Providing Laying And Jointing Of Hdpe Pipe 40Mm Dia = 2000Rmt)., Shimla-Himachal Pradesh
TDR : 56151596
Tender Notice
BOQ
6 Days Left
Shimla
Himachal Pradesh
Tender For Providing Water Supply Scheme Summerkot In Tehsil Rohru Distt Shimla (H.P) (Sh: repair renovation Providing Providing Laying And Jointing Of Hdpe Pipe 40Mm Dia = 2000Rmt).
Name of Work:- Providing WSS Summerkot in Tehsil Rohru Distt Shimla (H.P) (SH: R/R Providing Providing Laying and jointing of HDPE Pipe 40mm dia = 2000Rmt).
Sl. No.
Item Description
1
Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed, stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge.
2
Laying jointing in Trenches high density polythene pipe for use for buried waterman line and servises and for water supply/Irrigationabove ground both inside and out side building duly ISI marked (IS: 4984- 1995) as ammended up to date)in following grade of materials pressure rating and nominal dia complete with fitting (Earth work to be measured and paid for separetely)
3
HDPE pipe 40MM dia. PE 80 PN- 6
4
Fabricated and manufacturing of common header of 50mm dia , 40mm dia & 32mm dia pipe including cutting of GI pipe of required length pipe will be closed at booth ends by welding MS Sheet of 5mm thick. There after 5 Nos. holes of 50mm, 40mm, 32mm, 25mm, and 20mm dia. with welding shall be carried out at required at required spacing in the GI pipe for commo so give the shape of Tee. One end shall beconnected to common header by electric welding & at other end socket will be welded which will be connected to the main line s well as with service line at all joints will be socketed GI Nipple, Union, tee of different dia will be provided as per site requirement. The bends of require degrees will also be febricated as per requirement of site. The flow will be regulated by providing and fixing gate valve of different diameter including testing of joints to the satisfaction of Engineer- in- charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
