|
| 1 | Construction of Septic tank and Soak Pit for sanitary complex at pulwama |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil |
| 3 | Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs landings, balconies and acess platform. |
| 6 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level |
| 7 | Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in foundational plinth in Cement mortar 1:6 ( cement : 6 Fine Sand) |
| 8 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 9 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry, but excluding the cost of noising of steps etc. complete. 50mm thick 20 mm nominal size stone aggregate |
| 11 | p/f of RCC rings 1.2 m dia (1:5:3) mix of concrete 150 mm height 100 mm thick i/c excavation complete Job |
| 12 | p/f of heavy duty manhole FPR over 1.5'x1.5' complete job all as per directions of EIC |
| 13 | Carriage by mechanical Transport |
| 14 | Sand/Bajri for an avg. Lead of 15 kms |
| 15 | Bricks 25 km |
| 16 | Disposal of Excavated material beyond MC Limits by MT |
| 17 | Repair and Renovation of old Toilet Blocks of MC Pulwama |
| 18 | Dismantling W.C. Pan of all sizes including disposal of dismantledmaterials i/c malba all complete as per directions of Engineer-in-Charge |
| 19 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 21 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters leadWith cement mortar 1:4 (1 cement : 4 fine sand) |
| 22 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil |
| 23 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 |
| 24 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 |
| 25 | P/L OF DRY STONE SOLING HAND PACKED I/C CARRIAGE BY MT COMPLETE JOB |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 29 | 25 mm nominal outer dia pipes outside |
| 30 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 31 | 20mm nominal outer dia pipes. |
| 32 | Providing and fixing PPR Unions |
| 33 | PPR Union 20mm |
| 34 | PPR Union 25mm |
| 35 | P/F of following PVC pipes and fittings of standard quality and make (B Type) Prince or equivalent incl. jointing /testing complete |
| 36 | 100 mm dia |
| 37 | 75 mm dia |
| 38 | Plain bend |
| 39 | 75 mm |
| 40 | 100 mm |
| 41 | P trap(100 mm) |
| 42 | Reducer |
| 43 | 100 mm x75 mm |
| 44 | Floor Trap (100 mm) |
| 45 | Floor Trap (75 mm) |
| 46 | Collar 100mm with rubber washer |
| 47 | Collar 75 mm with rubber washer |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 49 | Providing and fixing of FRP plain sheets of approved shade for washroom doors as per site including screws etc complete |
| 50 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 51 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 52 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 53 | door 75x45x3.2 mm |
| 54 | window 75x45x3.2 mm |
| 55 | P/F CP brass fittings of standard quality and make AS PER DIRECTIONS OF ENGINEER INCHARGE |
| 56 | Bib Cock |
| 57 | Angle valve |
| 58 | Health Faucet |
| 59 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 60 | door 150x 10 mm |
| 61 | window |
| 62 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete |
| 63 | doors 125 mm |
| 64 | windows 100 mm |
| 65 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. Complete 250x16 mm |
| 66 | Providing and fixing STAINLESS STELL soap HOLDER MIRROR FINISH COMPLETE JOB |
| 67 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) cover with frame (heavy duty) FRP 450x450 mm internal dimensions, R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions450 x450 mm and 45 cm deep for single complete job.. |
| 68 | P/F of heavy duty manhole FPR cover 1.5'x1.5' COMPLETE JOB |
| 69 | P/F of sbd stainless steel anti cock roach with hole floor drain strainer |
| 70 | Renewing glass panes, with wooden fillets wherever necessary : 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 71 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings complete job W.C. pan with ISI marked white solid plastic seat and lid. |
| 72 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 74 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 75 | P/f of LONG NOSE LONG BODY Wall plate brass of approved brand as per directions of engineer incharge complete job |
| 76 | P/f of pillar tap basin faucet brass mirror like chrome finish of approved brand as per directions of ingineer incharge |
| 77 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. ssr 14.84 |
| 78 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 79 | Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. |
| 80 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 81 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 82 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade, one or more coats on old work. |
| 83 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively |
| 84 | Providing and fixing of urinal flush valves exterior finish copper chrome plated wall mounted hand press of approved brand and make complete job |
| 85 | Applying priming coatWith ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 86 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1MMTHICK |
| 87 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16 mm thick |
| 88 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 89 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately..2Powder coated aluminum (minimum thickness of powder coated 50 microns)22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns) job Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 90 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately..2Powder coated aluminum (minimum thickness of powder coated 50 microns)22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns) job Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 91 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. side and balancing lamination on other side. 22.2.2 Pre-laminated particle board with decorative lamination on both sides. |
| 92 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. ( |
| 93 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness. |
| 94 | Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width |
| 95 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm |
| 96 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 97 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper |
| 98 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete0.5 mm thick |
| 99 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 100 | Carriages of material by Mechnical Transport. |
| 101 | Sand/ Stone Aggregate from 15 Km lead |
| 102 | Taking of Geo tagged photographs before/during and after the execution of the work and providing and installation of information board at all sanitary complex |
| 103 | Repair/Renovation of Existing Community Toilets/Public Toilets by way of Electric Works of MC Pulwama |
| 104 | Wiring for light point/ fan point/ exhaust fan polnt/ call bell polnt with 2X 1.5 sq.mm FRLS PVC Insulated copper conductor (Havell/Polycab/ Fenolex/ Anchor/equlvalent as directed by engineer Incharge.) single core cable in surface / recessedmedium class PVC condult (excluding cost of condult), with modular switch ( ABB Tivsha/Legrand Mylinc /SSK NV/schnelder Livia /Crabtree athena make.), modular plate, suitable Gl box. |
| 105 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC Insulated copper conductor( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable In surface/recessed medium class PVC conduit (excluding cost of conduit) |
| 106 | Supplying and fixing sultable size GI box with modular plate and cover in front on surface or in recess, Including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, sultable GI boxconnections etc. as required. Modular Switch & Socket:- (ABB Tvisha/Legrand Mylinc /SSK NV/schnelder Llvla /Crabtree athena make.) |
| 107 | Wiring for lighting circuits/ inverter circuits/ 6-10 amp power plug with 2X2.5 sq. mm FRLS PVC Insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessedmedium class PVC conduit,( excluding cost of conduit) alongwith 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing as requlred. |
| 108 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providingand fixing 3 pin 5/6 A nodular socket outlet and 5/6 A modular switch, connections etc, as required. |
| 109 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor Havell/Polycab/ Fenolex/ Anchor/ equivalent as directed by engineer Incharge.), single core cable in surface/ recessed medium class PVC condult( Including cost of conduit) as renuired |
| 110 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 111 | Supplying and fixing of following sizes of medlum class PVC conduit/ duct ( Anchor/ Ravindra/ Eq. make)along withaccessories in surface/recess Including cutting the wall and making good the same In case of recessed condult as requlred,with cement plaster, wall putty, paint, complete |
| 112 | 25 mm |
| 113 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate asreauired. |
| 114 | Supply Installation testing and commissloning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schnelder Livlo/Crabtree athena makel) |
| 115 | Supply installation testing and comm. Of 250mm 300mm sweep exhoust fan Shutter type of havell /USHA/Crompton/equivalent make as directed by engineer Incharge, Including making of space in wall/ window as per site requirement and necessary connections. |
| 116 | Supplying and fAixing following way, single pole and neutral, sheet steel, MCB distribution board, ( legrand/ inider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, Interconnectlons,powder palnted Including earthing etc.as requlred. (But without MCB/RCCB/Isolator) |
| 117 | 8 way (6+ 2), Double door |
| 118 | S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ ABB./equivalent make as directed by engineer Incharge. |
| 119 | (a) 6-32 Amp SP MCB No 12 256.00 3,072.00 |
| 120 | (b) 40-63amp DP MCB |
| 121 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl, PVC Block. And 15 watt LED Lamp, Philips/ Havel's /Wipro make / sample to be approved before installation.. |
| 122 | Supply/Laying (Partly overhead/ partly underground), testing and commissioning of PVC XLPE Insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminlum lugs of required size. |
| 123 | b)10 sq.mm 2 core Please Enable Macros to View BoQ information |
