Tender For Renovation Of Community Center In Sector-23, Noida.
Tender Value
9.86 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Community Center In Sector-23, Noida.
BOQ
| Sl. No. | Item Description |
| 1 | S/W of submain with 3 nos. 2.5 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (p) |
| 2 | S/F of Fan Regulator Dimmer type 300x400 watt ISI marked on the existing switch board including making connection, required material, laour T/P etc. for proper completion of work of Anchor/Kinjal make. As per PS No. 1203 |
| 3 | S/W of submain with two no. 6 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289D |
| 4 | S/W of submain with two no. 10 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (G) |
| 5 | S/W of submain with two no. 4 sq.mm FR PVC insulated 1100volt grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by E/I PS No. 289 (B) |
| 6 | S/f following piano type switch/socket on the exitsting switch box /cover including connection etc. as required. DSR 2016 1.23 a) 5/6 amps, one way switch,DSR-2018, 1.23.1 |
| 7 | b) 5/6 amps, two way switchDSR-2018, 1.23.2 |
| 8 | c) 15/16 amps, one way switch, DSR-2018, 1.23.3 |
| 9 | d)3 pin 5/6 amps socket outlet,DSR-2018, 1.23.4 |
| 10 | e)6 pin 15/16 & 5/6 amps socket outlet, each DSR-2018, 1.23.5 |
| 11 | f)Bell push, piano type each DSR-2018, 1.23.8 |
| 12 | S & F Brass batten/ angle holder incl connection etc as required DSR-2018, 1.34 |
| 13 | S/F of SP MCB 6 Amp to 32 Amp Havells make 10 KA complete in all respects PS No. 1002 CAT-A |
| 14 | S&F of 40 Amp. DP MCB (10 KA) C Curve complete in respects. PS. No. 1010 CAT-B |
| 15 | S/F of 63Amp 4 pole MCB (10KA) Havells make complete in respects. PS. No. 1020A CAT-A |
| 16 | Supply and Fixing of LED Tube light batten Fitting suitable for upto 1x22 watt. LED tube light on surface complete in all respects. P.S. 1413 CAT-AA |
| 17 | Erection and testing of ceiling fan and regulator etc. excluding supply of down rod,complete in all respects. PS.No. 1115 |
| 18 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respect. P.S. No. 1120 |
| 19 | Supplying of 1200 mm Dia ceiling Fan complete in all respects. AOR Pg. |
| 20 | Supplying of 300 mm Dia exhaust Fan complete in all respects. AOR Pg. |
| 21 | Supply and fixing of power plug with 15A/240V V flush type switch and 5 Pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic Laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer PS.No. 1139 |
| 22 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top of suitable size of as directed by the Engineer-Incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS.No. 501 a)16 Sq mm x 2 core |
| 23 | b)16 Sq mm x 4 core |
| 24 | S/F of cable Lug(socket) to the cable lead. Complete in all respects as per PS No. 5041) 16sq. mm |
| 25 | S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. P.S. No-379 |
| 26 | Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, ouplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level)including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required 90 mm dia (OD-90 mm & ID-76 mm nominal)D.S.R 14.16.2 Pg No-49 |
| 27 | Wiring point of light in 1 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conducter cable as earth wire drawan in existing inside the conduit. & Piano type switch and ceiling rose/angle /bettern holder 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with dupply of all material labour & T&P etc. required for proper completion of the work as directed at iste by the engineer. complete in all respects As per PS No. 174C |
| 28 | Wiring point for ceiling fan in 1 sq. mm FR PVC insulated multistrand single core copper conductoer cable drawn through existing PVC conduit with 1.5 sq. mm FR PVC insulated multistrand copper conducter cable as earth wire drawn in side the conduit. & 5Amp flush type switch and ceiling rose / angle / betten holder 3mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with supply of all material labour & T &P etc. required for proper completion of the work as directed at site by the engineer.Complete in all respects As per PS No. 177C |
| 29 | wiring point of plug point in 1 sq.mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit. & flush type switch and ceiling rose/angle/betten holder 3 mm thick phenolic laminated backelite sheet with brass machine screw and brass cup washers mounted over existing MS swich board box/junction box with supply of all material labour & T&P etc. required for proper completeion of the work as directed at site by the engineer. complete in all respects As per PS No.178C |
| 30 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. E/I. UPPWD-2018 PS No. 1423 Catt-AAA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender