|
| 1 | Dismantling of old plaster & cleaning of all concrete surfaces of roof slab including existing waterproofing treatment material along with any other protective screed to expose mother slab to receive new waterproofing treatment layer etc complete as directed by engineer in charge up to floor 5 level |
| 2 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 3 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 4 | Extra for providing and mixing water proofing material proportion recommended by the manufacturers.;12mm cement plaster 1: 4 (1 cement : 4 sand) |
| 5 | Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet spaced 1200mm center to center and cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings fixture smoke detectors etc. wherever required. |
| 6 | Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners level clips of size 85x30x0.8mm spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint for all heights as per specifications drawings etc. complete. (As Directed by Engineer in Charge)Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen. |
| 7 | Providing 18mm thick plaster of parts (gypsum anhydrous) ceiling upto height of 5m above floor level over 1st class matti wood strips 25 x 6mm with 10mm gap in between & reinforced with rabbit wire mesh fixed to wooden frame.;Flat Surfaces |
| 8 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 10 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 11 | Fixing glazed / ceramic / vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477 using 5 kg. adhesive per sq.m of tile area in average 3 mm thickness |
| 12 | FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.;Specified Cross Section;5 x 2 |
| 13 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter. Manufacture Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood moisture less than 17% wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 2015 certified factory. Accessories: i) S. S. Hinges 4†- 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5†- 2 Nos iv) Handle 5†- 2 Nos;Shutter Thickness;35mm |
| 14 | Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer - in - charge;Above 1 Sq.m area |
| 15 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.;Figured glass |
| 16 | Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading |
| 17 | Providing and fixing blockboard doors of size (0.9m x ht-2.1m) with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing, Fixed glass 6mm thick (0.4x1.2m) with SS Chrome plated handles (30cm length), mortice brass latch & lock etc. Complete |
| 18 | Providing and fixing plywood partitions M-M' (Height of Partitions @ 3m)- with framework of 50x37.5 mm aluminum pipe horizontally and vertically at equal distance and fixed with 12mm thick marine ply on both sides with 1mm thick laminate including providing and fixing 20 mm thick first class T.W. beading / lipping for edges including Melamine polishing etc. complete |
| 19 | Providing and supplying of cupboard (CB1,CB1a) of size 1.5m x 0.5m and ht. 0.66m made up of marine plywood with shutter and sides of cupboard of thickness 19mm thick marineplywood and 12mm thick marine plywood for back of cupboard, 8mm superior glass for horizontal shelves @0.3m c/c , including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 4 long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge. |
| 20 | Providing and supplying of cupboard (CB2) of size 0.9m x 0.53m and ht. 1.50m made up of marine plywood with shutter, sides & Top of cupboard & for horizontal shelves @0.35m c/c of thickness 19mm thick marine plywood and 12mm thick marine plywood for back of cupboard including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6 long size SS handle, cupboard locks etc complete. as per the Architect drawings and Engineer in charge. |
| 21 | Providing and supplying of cupboard (CB3) of size 1.50m x 0.53m and ht. 1.50m with 3 shutters made up of marine plywood with shutter, sides & Top of cupboard & for horizontal shelves @0.35m c/c & Vertical ply separating two and single shutters of thickness 19mm thick marine plywood and 12mm thick marine plywood for back of cupboard, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6 long size SS handle, cupboard locks etc. complete. as per the Architect drawings and Engineer in charge. |
| 22 | Providing and supplying of cupboard (CB4) of size 2.05m x 0.53m and ht. 1.50m with 3 shutters made up of marine plywood with shutter, sides & Top of cupboard & for horizontal shelves @0.35m c/c of thickness 19mm thick marine plywood and 12mm thick marine plywood for back of cupboard and vertical partition, including teak wood beading to all cut edges with outside 1mm thick Laminate and 1mm thick off-white laminate with melamine polish complete. Soft closing hinges with necessary screw 6 long size SS handle, cupboard locks etc. complete. as per the Architect drawings and Engineer in charge. |
| 23 | Providing and making of Staff Table - (T1) of size 1.50m X 0.75m X 0.76m & Side table(0.9mx0.45mx0.76m) made of 19mm thick marine plywood desktop over it glass top 6mm thick with chamfered edge. Vertical sides of 5cmx5cm powder coated M.S box section frame with central portion 19mm Marine Plywood finished with 1mm thick Laminate having 6mm thick chamfered teak wood molding & storage two sliding drawer of 150mm depth of 12mm thick marine ply and two openable shutter below it with internal 1mm thick off-white laminate. Including necessary hardware such as SS hinges, keyboard telescope drawer channel,10cm Chrome plated handles, Locks for drawers & shutters, rubber bushes at base & G.I Flats 3mm thick welded verticals supports to tabletop. Powder coated Keyboard shelf with mouse pad holder fixed on sliders & CPU Shelf with castors to be provided. Perforated aluminum/m.s powder coated plate 3mm with marine ply. Footrest of 19mm plywood with laminate finish. 2'' dia cable manager and all ext.... The extended description pertaining to this item is enclosed in Annexure_RA-176107. |
| 24 | providing and fixing of roller blinds of wooden blind apex finish - thickness 50mm. |
| 25 | Supplying and placing in position stainless steel Open type dust bin (heavy) perforated of size 10\\"x 14\\"inch |
| 26 | supplying & fixing acrylic name plates of size 9'' x 5'' as per the direction of the engineer incharge. |
| 27 | Supplying High back Versa mesh chair with castor comes equipped with an active Bio-synchro mechanism ,T-spine structure, PU top armrests & height adjustments as per the direction of the Engineer incharge. |
| 28 | Supplying Versa mesh visitor chair comes equipped with PU top armrests as per the direction of the Engineer InCharge. |
| 29 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section Please Enable Macros to View BoQ information |
