Tender For Repair And Renovation Of Institute Of Music And Fine Arts (Imfa), Poonch House, Bohri University Of Jammu, Jammu.
Tender Value
33.77 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
67556
Bank guarantee accepted
Document Fee
708
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Institute Of Music And Fine Arts (Imfa), Poonch House, Bohri University Of Jammu, Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 2 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 3 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand) |
| 4 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 5 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With non modular brick tiles |
| 6 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class deodar wood |
| 8 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm Second class deodar wood |
| 9 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. a. Second Class deodar wood |
| 10 | 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 11 | 12 mm thick Marine plywood conforming to IS: 710 |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood 35mm. |
| 13 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood 35mm |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile a. 600x600 mm |
| 15 | 800x800mm |
| 16 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade |
| 19 | Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 20 | Providing and fixing aluminum fittings for door and windows ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Door sliding door bolts a. 300x16mm |
| 21 | b. 250x16mm |
| 22 | Tower Bolt 300x10mm |
| 23 | 250x10mm |
| 24 | 150x10mm |
| 25 | 100x10mm |
| 26 | Aluminum Handle 125mm |
| 27 | 100mm |
| 28 | Aluminum Hanging floor door stopper (Twin Rubber stopper) |
| 29 | Aluminum Casement stay |
| 30 | wire gauge |
| 31 | 12 mm Ply ( commercial ) |
| 32 | M.S. single acting spring hinges 150 mm |
| 33 | Curtain Rods heavy duty including nobs & corners & other fittings Including fixing of Brackets complete 25mm nom Dia |
| 34 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 35 | Providing and applying white cement based putty of 1.0mm (avg.) thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 37 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 38 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 40 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16mm |
| 41 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 42 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 43 | 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size |
| 44 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 45 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for: Shelves (cast-in-situ) |
| 47 | Foundations, footings, bases for columns |
| 48 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 49 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 50 | Providing and fixing strips in joints of terrazzo/ cement concrete floors 40 mm wide and 4 mm thick. |
| 51 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 52 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 53 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 54 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. |
| 55 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes |
| 56 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 57 | Supplying/Providing / Fixing of 30mm thick puff pannel of superior quality for ceiling including cost of material, labour, carriage etc complete job (Note: Thickness of exterior layer powder coated CGI sheet not less than 0.50mm and puff pannel should be fire proof, water proof and anti-corrosive etc) All work upto floor V level. |
| 58 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 59 | Cleaning of Manholes including making the line functional as per site requirement complete job. |
| 60 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 61 | Engagement of Labour for different work Mazdoor |
| 62 | Carpenter 2nd class |
| 63 | Plumber (Fitter) 2nd class |
| 64 | welder |
| 65 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 66 | P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm & 340 x 410 x 265 mm sizes resp. |
| 67 | P/F White vitreous china urinal partition of 755x165x365mm size of (Parryware/Hindware/Cera) make and quality. |
| 68 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32 mm dia |
| 69 | P&F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Make Parkash Surya/Jindal). A. 20 mm nominal bore |
| 70 | 15mm nominal bore |
| 71 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 72 | P/F of phase ISI make for bib cock/ Angle valve |
| 73 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 74 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 75 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail |
| 76 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 77 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 78 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 79 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 80 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 81 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 82 | P/F CP Brass Pillar Cock 15mm nom. Bore. |
| 83 | P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore. |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 85 | P/F Ball Valve (Full way valve) made of cast brass including handle a. 15 mm nominal bore |
| 86 | 20mm nominal bore |
| 87 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls 15mm nominal bore, 105mm long, weighing not less than 138gms |
| 88 | P/F of PVC pipe superior quality (Supreme/Finolex/Prince) make 4kg/scm pressure including all PVC fittings for Rain water pipe, complete job. 110mm dia |
| 89 | Providing and fixing on wall face un-plasticized - PVC moulded fittings etc a. 110 mm bend |
| 90 | 75 mm bend |
| 91 | Door Bend 110mm |
| 92 | P/F trap PVC make of self cleansing design with screwed down, including cost of cutting and making good the walls and floors 100x75mm |
| 93 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. (parryware/hindware/cera) a. Flat back wash basin of size 550x400 mm. |
| 94 | Angle back wash basin of size 400x400 mm. |
| 95 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 96 | P/F C. P. Grating 100mm dia |
| 97 | P&F white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580 x 440 mm |
| 98 | P/F solid plastic seat with lid for pedestal type W.C. pan complete White colour |
| 99 | P/F PVC water tank cover (upto 2000 ltr capacity of water tank). |
| 100 | Engagement of Tractor trolly along with labour to shift the Mulba to dumping yard. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender