|
| 1 | Schedule 'A' Part-I (B/R itmes)Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete, all as specified and as directed. |
| 2 | Dismentling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles , complete, all as specified and as directed. |
| 3 | Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete, all as specified and as directed. |
| 4 | Material and labour for 15 mm thick rendering or plastering using polymer modified ready mix plaster mortar of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed .Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite |
| 5 | Material and labour for 10 mm thick rendering or plastering using polymer modified ready mix plaster mortar of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed .Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite |
| 6 | Material and labour for 05 mm thick rendering or plastering in patches using polymer modified ready mix plaster mortar of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of brick work or concrete ceiling surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed .Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite |
| 7 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed. |
| 8 | Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed . |
| 9 | Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of ceiling, chajjas, roof projection etc., complete all as specified and as directed. |
| 10 | Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper with painting roller over prepared surfaces of walls pillars, cornices etc. complete all as specified and as directed . |
| 11 | Material and labour complete removal of existing treatment from wall by scrappers or any other means and washing , rubbing down and stopping and applying two coats of acrylic distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed . |
| 12 | Material and labour complete removal of existing treatment on ceiling etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and preparation of surfaces and applying two coats of white washing complete all as specified and as directed . |
| 13 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the wall, pillars, cornices etc complete all as specified and as directed . |
| 14 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior grade paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and as directed . |
| 15 | Material and labour preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 16 | Material and labour preparation of old decorated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed . |
| 17 | Demolition of cement concrete of any description ( incl floor tiles and or PCC below tiles) in any position not otherwise specifically provided for complete all as specified and directed. |
| 18 | Supply and fixing as in repair water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I complete, all as specified and as directed. |
| 19 | Supply and fixing as in repair water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I complete, all as specified and as directed. |
| 20 | Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair , complete, all as specified and as directed. |
| 21 | Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair , complete, all as specified and as directed. |
| 22 | Supply and fixing bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair , complete, all as specified and as directed. |
| 23 | Supply and fixing PVC connections 15 mm size with PTMT nuts of length 600 mm as in repair, complete, all as specified and as directed. |
| 24 | Supply and fixing vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair, complete, all as specified and as directed. |
| 25 | Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including water closet pvc seat cover white closed pattern with flat bottom and cover including making connections and fixed in position as in repair, complete, all as specified and as directed. |
| 26 | Supply and fixing mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection as in repair, complete, all as specified and as directed. |
| 27 | Supply and fixing of sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen with plugs, waste pipe, brass chromium plated coupling and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm as in repair complete all as specified and as directed . |
| 28 | Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete, all as specified and as directed. |
| 29 | Supply and fixing in repair PVC water closet seat cover, white, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device complete, all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete, all as specified and as directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads , complete, all as specified and as directed. |
| 32 | Material and labour sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane , complete, all as specified and as directed. |
| 33 | Supply and fixing 03mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane complete all as specified and directed. |
| 34 | Supply and fixing stainless steel butt hinges 100mm long medium weight, complete, all as specified and as directed. |
| 35 | Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete, all as specified and as directed. |
| 36 | Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete, all as specified and as directed. |
| 37 | Supply and fixing 150 mm long aluminium handle fabricated type anodised, complete, all as specified and as directed. |
| 38 | Supply and fixing in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm , complete, all as specified and as directed. |
| 39 | Material and labour sheet glass 4.8mm thick tinted quality and glazing with aluminium snap beading, rubber gasket in square not exc 0.5 sqm in each pane , complete, all as specified and as directed. |
| 40 | Supply and fixing galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with wooden beading/MS flat iron 10 x 3mm/aluminium beading as required, complete, all as specified and as directed. |
| 41 | Supply and fixing galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple as in repair , complete, all as specified and as directed. |
| 42 | Supply and fixing as in repair mild steel powder coated wooden finish curtain rod 25mm dia fixed with and including decorative brackets, two lotto for each rod length at both end, etc. fixed with stainless steel screws complete all as specified and as directed. |
| 43 | Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including excavation, returning filing, removal and cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete, all as specified and as directed. |
| 44 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete, all as specified and as directed. |
| 45 | Supply and fixing 110mm bore PVC (SWR) bends of any radius, complete, all as specified and as directed. |
| 46 | Disconnecting existing water tanks of capacity 500 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed by the Engineer-in-Charge. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due. |
| 47 | Disconnecting existing water tanks of capacity 1000 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed by the Engineer-in-Charge. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due. |
| 48 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint on the wall, pillars, cornices etc complete all as specified and as directed. |
| 49 | Material and labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement, complete, all as specified and as directed. |
| 50 | Material and labour providing 50 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work, complete, all as specified and as directed. |
| 51 | Supply and fixing CP brass wall mixture 3–in–1 system for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange as in repair, complete, all as specified and as directed. |
| 52 | Supply and fixing as in repair brass chromium plated WHB mixer or sink mixer for mixing hot & cold water for 15mm bore pipes including all connecting fittings, screwed down for iron pipe and fixed complete all as specified and as directed . |
| 53 | Supply and fixing of 32 mm dia 0.80m long PVC waste pipe for wash hand basin /Kitchen sink etc. as in repair complete all as specified and as directed . |
| 54 | Supply and fixing powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, complete, all as specified and as directed.Note : (a). Glazing shall be measured and paid separately.(b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.(c). The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed. |
| 55 | Supply and fixing anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the window frame with C.P brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, complete, all as specified and as directed. |
| 56 | Supply and fixing in repair 6mm to 8mm thick Hollow profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Schedule 'A' Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc., complete all as specified and as directed. |
| 58 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 59 | Description all as per serial item No.58 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed . |
| 60 | Description all as per serial item No.58 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed .Note : (i) Point wiring shall be done in a manner that there will be 04 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 61 | Description all as per serial item No.58 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed.Note : (i) Point wiring shall be done in a manner that there will be 02 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 62 | Description all as per srl item No 58 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed .Note : (i) Point wiring shall be done in a manner that not more than 01 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 63 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directed . |
| 64 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed . |
| 65 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed. |
| 66 | Supply and fixing of modular socket outlet multipin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed . |
| 67 | Supply and fixing of modular socket outlet multipin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed. |
| 68 | Supply and fixing as in repair electronic Fan regulator, modular 100 watts, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep, complete, all as specified and as directed . |
| 69 | Supply and fixing in repair calling bell, ding dong, 230 volt, complete all as specified and as directed. |
| 70 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed. |
| 71 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed . |
| 72 | Supply and fixing in repair, LED batten fitting 10-12 watts, 2 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LUMILINE+ BS10WLED865SPCSS of make Havells or equivalent in make given in Appx 'B'. |
| 73 | Supply and fixing in repair LED batten fitting 18-20 watt, 4 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LUMILINE+ BS20WLED865SPCSS of make Havells or equivalent in make given in Appx 'B'. |
| 74 | Supply and fixing in repair, LED surface mounted bulk head luminaries, 8-10 watts, with min 800 lumen, industrial model, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. HEXAFT10WLED857SSYMBOPC of make Havells or equivalent in make given in Appx 'B'. |
| 75 | Supply and fixing in repair, 9/12 watt LED light fitting heritage wall mounting fixture (sketch type) including B-22 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and as directed by the Engineer-in-Charge. Cat part No. HLWB-01-B22 of make Halonix or equivalent in make given in Appx 'B'. |
| 76 | Supply and fixing in repair, LED Bldg Security Light Fittings of capacity 20 -25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.ENDURASUNDOWNSL25WLED765PASYBOTGIHD of make Havells or equivalent in make given in Appx 'B'. |
| 77 | Supply and fixing in repair, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Supply and fixing LED Bollard 8-10 watt, IP-65 , 6500 K luminaire made of pressure die cast aluminium housing and clear glass , 240 volt, 50HZ, AC supply , complete with all accessories including electronic driver, internally pre wired including connecting with three core flexible copper conductor cable from Electric Supply Source to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge. Cat part NoBAMBOOBLS8WLED830PSYMTOPC of make Havells or equivalent in make given in Appx 'B'. |
| 79 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCBs, 20 Amps, 10 KA, 'B' curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811955 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 80 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 3 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed. |
| 81 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 4 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 82 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 6 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 83 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 8 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 84 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 12 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 85 | Supply and fixing PVC connection pipe 600 mm long and 15mm dia having wire mesh coating over it with brass nuts and washers suitable for connecting geysers inlet and outlet with GI tubings including taking out old unserviceable connections of any description all as specified and as directed . |
| 86 | Supply and fixing of heavy duty exhaust fan 250mm sweep with corrosion resistant PVC body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, PVC base frame with rubber mountings for silent operation, maximum watt input not more than 25 watt, 1400 RPM, minimum air delivery 210 cum/hr, PVC blades and shutter type louvers self-openable/ close able for protecting the entrance of birds and testing as in repair complete all as specified and as directed by Engineer-in-Charge. Cat part No 70049 of make Bajaj or equivalent make given in Appx 'B'. |
| 87 | Supply and laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 88 | Supply and laying as in repair sub main wiring with four run of 10 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 10 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Four runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 89 | Supply and fixing sheet metal enclosure triple pole & neutral(TPN) IP-43 including MCB, TPN 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811841 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 90 | Supply and laying in repair sub main wiring with two run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked, multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade, ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 91 | Supply and fixing LED post top luminaire 20W- 25W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories, including electronic driver, internally pre wired including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat Part No. HLPT-S04-20-CW of Make Halonix or equivalent in make given in Appx 'B'. |
| 92 | Note:- Amount of credit of Rs.16,853.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 & 124 of tender doCubic metre ents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
