|
| 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed. |
| 2 | M&L coloured double charged polished glazed vitrified tiles 9-10 mm thick (Square/rectangular) polished area of each tile exceeding 0.36 sqm but not exec 1 Sqm in floors/vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 3 | All as per item No. 2 but in in vertical surfaces such as skirtings and dados. |
| 4 | M&L light shade vitrified light coloured Ceramic tiles 9-10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 5 | All as per item No. 4 but in in vertical surfaces such as skirtings and dados. |
| 6 | M&L HI-gloss digital ceramic tiles in vertical surface of size 600mm x 1200mm and 8-10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, complete all as specified and directed. Note: The above item will be executed by applying tile adhesive of approved make and as per manufacturer's instruction. |
| 7 | M&L glazed tiles digital coloured ceramic tiles 300x450x7mm/300x600x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match, complete all as specified and directed. Note:- Rate of designer border (Highlighter) tiles are included in this item. |
| 8 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 9 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 10 | M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc, complete all as specified and directed. |
| 11 | M&L rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. |
| 12 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed. |
| 13 | M & L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:4), complete all as specified and directed. |
| 14 | M&L for granite (of any approved colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including 15mm thick screed bed including grinding and polishing as in kitchen platform, counter for WHB, flooring and all other similar works, complete all as specified and directed. |
| 15 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed. |
| 16 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed. |
| 17 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 40 mm dia bore, complete all as specified and directed. |
| 18 | S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed. |
| 19 | S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed. |
| 20 | S/F GI tubing 40mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed. |
| 21 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc 10cm girth, complete all as specified and directed. |
| 22 | Demolition and breaking up drain pipes of dia 100 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 23 | Demolition and breaking up drain pipes of dia 75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 24 | S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and directed. |
| 25 | S&F in repairs PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and directed. |
| 26 | S&F in repairs 75mm dia PVC (SWR) bends, complete all as specified and directed. |
| 27 | All as item no 26 above but with access door. |
| 28 | S&F in repairs 110 mm dia PVC (SWR) bends, complete all as specified and directed. |
| 29 | All as item no 28 above but with access door. |
| 30 | S & F in repairs 75mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. |
| 31 | S & F in repairs 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. |
| 32 | S&F in repairs 110mm dia PVC (SWR) vent cowl, complete all as specified and directed. |
| 33 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan, complete all as specified and directed. |
| 34 | S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. |
| 35 | S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size, complete all as specified and directed. |
| 36 | S&F in repair counter top/counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of size complete all as specified and directed. Make : Cat Part No 10095 of Hindware or equivalent in Cera / Parryware. |
| 37 | S&F in repair wall mounted water closet pan of size 510x360x360mm fixed with ancour fastener, outlet pipe & accessories of size complete all as specified and directed. Make : Cera Cat Part No S1043170 of Hindware or equivalent in Cera / Parryware. |
| 38 | S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 39 | S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 40 | S&F as in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 41 | S&F as in repair 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 42 | S&F as in repair 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 43 | S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 44 | S&F as in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. with wall flange, complete all as specified and directed. |
| 45 | M&L in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator, complete all as specified and directed. |
| 46 | M&L in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3\\" long pipe connection with aerator, complete all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag. |
| 47 | S & F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long, complete all as specified and directed. |
| 48 | S & F in repairs CP Towel Bracket (61 CM) long, complete all as specified and directed. |
| 49 | S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 50 | Supply and fixing in repair 15mm bore overhead shower of size 150x150mm or 200mmx200mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long(stainless steel) square shape with wall flange, complete all as specified and directed. |
| 51 | S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts, complete all as specified and directed. |
| 52 | S&F in repair for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs, complete all as specified and directed. |
| 53 | S& F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed. |
| 54 | S&F in repairs urinals half stall, flat back of size 355x340x535mm in snow white including each and all acessories, complete all as specified and directed.Make: Jaguar(Item code-URS-WHT-13261. HSN code-69109000) / Kerovit / Parko, complete all as specified and directed. |
| 55 | S&F in repairs auto closing flushing valve for flat back urinals.Make: Jaguar. (Item code-PRS-CHR-077. HSN code-84818020) / Kerovit / Parko, complete all as specified and directed. |
| 56 | S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm, complete all as specified and directed. |
| 57 | S&F in repair Kitchen sink without drainage board made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarft wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 178mm (or nearest size as per Cat Part specified), complete all as specified and directed. |
| 58 | M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed. |
| 59 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed. |
| 60 | Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed. |
| 61 | Material and labour for clean the sunken portion of toilet/ Bath / WC/ Kitchen throughly remove dirt, dust etc, sanitary pipes entering through walls and floor shall be sealed with Dr Fixit Bathseal tape or eqvt. and the gaps to be grouted with non-shrink cementitous grout \\"Dr fixit bathseal grout\\"or Eqvt and Applying three coat polyurethane waterproofing paint on new plastered surface as per manufature instruction for sunken portion, complete all as specified and directed. |
| 62 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 63 | Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan, complete all as specified and directed. |
| 64 | Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall putty, complete all as specified and directed. |
| 65 | Dismantling of ceiling boards of any description, and any thickness including cover fillets and frame work, complete all as specified and directed. |
| 66 | M & L for powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter, complete all as specified and directed. |
| 67 | S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil, complete all as specified and directed. |
| 68 | M & L for 8/10mm thick PVC ceiling/wall panelling (any colour OR pattern) with aluminium framework for receiving ceiling boards, including all aceessoreis for fixing at variuos levels, complete all as specified and directed. |
| 69 | Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc, complete all as specified and directed. |
| 70 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6), complete all as specified and directed. |
| 71 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any height, complete all as specified and directed. |
| 72 | M & L for cement mortar (general purpose, factory made, for outdoor/indoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg percubic metre, dry density after setting 1800 kg per cubic metre,pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for rendering 12-14mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height, complete all as specified and directed. |
| 73 | M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coat 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instruction all as specified and as directed. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP, birla opus or equivalent as approved by GE, complete all as specified and directed. |
| 74 | M & L for preparation of surfaces cracks of plaster internal/external of walls, ceilings/Chajjas upto 5 mm wide, remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scafolding of any hieght, complete all as specified and directed. |
| 75 | M & L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finish the surface even and smooth without using extra cement, complete all as specified and directed. |
| 76 | M & L for preparation of surfaces by cutting 'V' groove cracks of plaster internal/external of walls, ceilings/Chajjas all along the crack 5 mm to 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght, complete all as specified and directed. |
| 77 | M&L for preparing New surfaces of walls/ceilings and applying two coat of weather proof acrylic exterior paint (100% Acrylic) of Apex Ultima,over a coat of primer and scaffolding where required at any hieght for external painting, complete all as specified and directed. |
| 78 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty, complete all as specified and directed. |
| 79 | M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome, complete all as specified and directed. |
| 80 | M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height of bldg, complete all as specified and directed.Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex |
| 81 | S&F in repairs coloured glass mosaic tiles of size 25mm x 25 mm having thickness 6-8 mm for swimming Pool or any other places following SOP for Walls and Floor jointed & pointed with epoxy tile grout with the colour of tiles using water proofing tile in vertical & horizontal surfaces with tile adhesive mixed with latex admixture (MYK LATICRETE or equivalent) and 3mm wide joints pointed in matching colour of epoxy grout (MYK LATICRETE SP 100) or other equal & approved all to manufacturer’s printed instruction and laid to approved pattern on backing cement-sand render & screed (measured separately) all as specified and directed. Note : (a)Tile should be applied by experienced applicator who has completed swimming pool work at other places. Applicator must show its completed projects application to Engineer-in-charge before going ahead with works (b) Tile design sample has to be produced by the contractor and passed by GE before application. |
| 82 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 83 | S&F for joist, channel, angle,or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed. |
| 84 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar patteren roof coverings including scafoldings of any height, complete all as specified and directed. |
| 85 | Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg, complete all as specified and directed. |
| 86 | Supply & fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg, complete all as specified and directed. |
| 87 | S&F in repairs PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with all necessary fixtures, of any size and shape for making canopies, shed etc. fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 gsm to 1200 gsm, complete all as specified and directed.Note: (a) The shape/design of the sheds will be as approved by GE. (b) Cost of structural steel used will be measured and paid separetly under relevant items in this schdule. Make: Mehler/ Sieon/ Haytes/ Ferrari or equivalent as approved by GE. |
| 88 | Cleaning of RCC water tanks of 5000 to 10000 litres of various capacity in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning, complete all as specified and directed. |
| 89 | Cleaning of PVC water tanks of capacity exceeding 250 litres but not exceeding 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: -Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be imposed on water tank. |
| 90 | all as item 89 above but capacity exceeding 501 litres but not exceeding 1000 litres. |
| 91 | all as item 89 above but capacity exceeding 1001 litres but not exceeding 3000 litres. |
| 92 | all as item 89 above but capacity exceeding 3001 litres but not exceeding 5000 litres. |
| 93 | S&F in repairs Rotational moulded polyethylene or loft tank water storage tanks 250 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, complete all as specified and directed. |
| 94 | S&F in repairs Rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, complete all as specified and directed. |
| 95 | S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, complete all as specified and directed. |
| 96 | S&F in repairs Rotational moulded polyethylene water storage tanks 2000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, complete all as specified and directed. |
| 97 | S&F in repairs Rotational moulded polyethylene water storage tanks 5000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, complete all as specified and directed. |
| 98 | S & F in repair of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE. |
| 99 | S & F in repair of 18mm thick, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc, complete all as specified and directed by Engr-in-charge. NOTE:- Sample as approved by GE. |
| 100 | S & F in repairs of Partial overlay / fully overlay hydraulic soft closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed by Engg-in-charge. Make: Asian sleek or equivalent as approved by GE. |
| 101 | S & F in repairs of stainless steel cabinet / drawers handle of grade 304 having a length of 250mm and shape, complete all as specified and directed. |
| 102 | S & F in repairs of stainless steel modular thali-plate basketSS 304, size of 520x485x200mm,heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 103 | S & F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 104 | S & F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer soft closing channel, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 105 | S & F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer soft closing channel having weighing capacity of 6 kg, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 106 | S & F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 107 | S & F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make: Asian sleek or equivalent as approved by GE. |
| 108 | S & F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic soft closing drawer channel having weighing capacity of 25 kg, complete all as specified and directed.Make: Asian sleek or equivalent as approved by GE. |
| 109 | Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exc 1.50 Sqm each, complete all as specified and directed. |
| 110 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proofand fire retardant and fixed in position with M.S hOld unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge. |
| 111 | S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full bodythreaded star headed counter sunk S.S screws complete all as specified and as directed by Engr-in-ChargeMake for Item No. 82 to 85- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion |
| 112 | S&F in repair Stainless steel waste coupling for wash basin/ urinal/kitchen sink fixing, complete all as specified and directed. |
| 113 | S & F in repairs to 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc. Make :- Easydry or other equivalent make,Sample as approved by GE, complete all as specified and directed. |
| 114 | S & F in repairs to 5 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc.Make :- Easydry or other equivalent make,Sample as approved by GE, complete all as specified and directed. Please Enable Macros to View BoQ information |
