Tender For Comprehensive Repairs To Various B/R Related Items To Certain Bldgs In Aor Of Yyy Avn Sqn And Caats Under Ge Nasik Road
Tender Value
50 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs To Various B/R Related Items To Certain Bldgs In Aor Of Yyy Avn Sqn And Caats Under Ge Nasik Road
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of steel window/ventilators any description and any size complete all as specified and directed. |
| 2 | S&F for powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed. |
| 3 | S&F for powder coated aluminium (minimum 50 micron powder coated) shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed. |
| 4 | S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partion frame of any size with one or more rebates including joining cleat,beading and connected accessories as required for fixing etc. complete all as specified.Note:(a) During fixing of frames, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. |
| 5 | S&F aluminium (minimum 50 micron powder coated) window and ventilator sliding shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified.Note:work is to be executed for high rise bldgs. |
| 6 | S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane. |
| 7 | S& F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Note:work is to be executed at any height and situation. |
| 8 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar. |
| 9 | M & L for Granite (of any type) work 20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match. |
| 10 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length) |
| 12 | S & F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. |
| 13 | Taking up or down steel tubing and connections 15mm bore etc.Note:work is to be done in multistorey bldgs(int and ext plumbing). |
| 14 | Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) including new fitting like elbow,socket etc shall be provided wherver required. Please Enable Macros to View BoQ information |
| 15 | Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) including new fitting like elbow,socket etc shall be provided wherver required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender