Tender For Improvement/Upgradation Of Road From New Bus Stand Connecting To Main Bye Pass Road
Tender Value
29.49 Lakhs
Estimated cost
Bid Submission
03 Jul 2026
1 days left
EMD
58980
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement/Upgradation Of Road From New Bus Stand Connecting To Main Bye Pass Road
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 2 | Supplying, stacking,Laying, spreading and compacting stone aggregate of specified sizes( 63 to 45mm) to WBM specifications in uniform thickness, hand picking, including rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening ( 13.2mm size) /binding material (stone dust/moorum) to fill up interstices of coarse aggregate,watering and compacting to the required density( finished work shall be paid) with all leads , lifts and carriages as involved upto site of work. All complete job. |
| 3 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) pecification including premixing the material aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, as per specifications and directions of Engineer-in-Charge Complete |
| 4 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.M.M. @ 0.75 Kg/sqm. |
| 5 | Providing and laying of 50 mm Premix Bitumenous macadam base coarse with stone aggregate of quality size and grading as specified in MORTH with straight run bitumen of grade 80/100 @3% by weight of total mix (@60kg/cum) including hot mixing transporting mixed material and laying with paver finishers to the required level and grade rolling with road roller of 8 to 10 ton capacity to achieve the required compaction and density cost and carriage of all materials involved complete |
| 6 | Providing and laying of 25 mm thick Semi Dense bituminous macadam course using mineral aggregate satisfying the gradation set out in specifications with 5% Binder content (by weight of total mix ) with the aid of hot mix plant and paver finisher including roller with road roller of 8 to 10 tone capacity to achieve the required density and compaction including cost and carriage of all materials and labour loading ,unloading and all taxes involved on account of labour and material including Bitumin complete |
| 7 | Providing and laying of seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of VG -10 grade bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100sqm of road surface including rolling and finishing with road all complete including cost and carriage of materials and labour , loading ,unloading and all taxes involved on account of labour and material including Bitumin complete |
| 8 | Providing and applying 2.5mm thick road marking strips (retroreflective)of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 days