|
| 1 | CN-FB-AP-M30-300: Providing 300mm dia Auger pile to required depth in standardised concrete mix M30 grade using 20mm gauge HBG stone jelly |
| 2 | EW-AS-NC-IR-2m: Earth work excavation for foundation in all soils and sub-soils to the required depth (Including Refilling)a) 0 to 2m depth. |
| 3 | CN-FB-PCC-1:5:10: Plain cement concrete 1:5:10 for foundation and basement using 40 mm gauge hard broken stone jelly |
| 4 | FW-FB-WOS-FB: Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfacesa. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 5 | FW-SS-WS-PS: b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 6 | CN-FB-RCC-M25: Providing and laying in position, Standardised Concrete Mix M-25 Grade in a accordance with IS:456-2000 using 20mma. In Foundation and basement |
| 7 | CN-SS-RCC-M25-(GF): b. In Stilt /Ground Floor |
| 8 | BW-FB-FLB-CM 1:5: Brick work in cement mortar 1:5 using Fly ash bricks of size 230x110x70 mma. In foundation and basement |
| 9 | BW-PW 110mm-FLB-CM 1:4: Brick partition wall in Cement Mortar 1:4 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm |
| 10 | PL-OU-CM 1:5-12mm: Plastering with CM 1:5 12mm thick |
| 11 | PL-OU-CM 1:5-75mm: Plastering in CM 1:5 12mm thick for border finish 75mm wide border |
| 12 | PL-OU-CM 1:5-50mm: 50mm wide border |
| 13 | PA-Ex-EEP-2C BPC: Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality |
| 14 | MW-MS-GR: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete |
| 15 | PA-Ex-IW-2C EP: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality |
| 16 | RE-RTS-Fe-CO: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire insulated with PVC, bending tying etc., all complete and as directed by the departmental officers. |
| 17 | FA-EJ-FP-Bit: Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality |
| 18 | WS-EX-RWD-75: Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipea. 75mm dia PVC SWR Pipe Please Enable Macros to View BoQ information |
