Tender For Construction Of Office Building For Municipal Corporation Faridabad Ballabgarh Zone.
Tender Value
20.32 Crore
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
40.64 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building For Municipal Corporation Faridabad Ballabgarh Zone.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Prebid meeting schedule amendment | Date | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | recovery of old dismantled good bricks |
| 2 | recovery of old dismantled brick bats |
| 3 | recovery of old steel scrap |
| 4 | recovery of old wooden doors |
| 5 | recovery of old windows |
| 6 | Providing and fixing flow switch in MS pipeline including connection etc as requred..150MM |
| 7 | Supplying, installation, testing and commissioning of electric driven terrace pump with Electrical Panel suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head |
| 8 | Providing and fixing Glass Reinforced Concrete (GRC) jaali of approved design, including the cost of all materials, labor, and finishing. The GRC jaali shall be pre-cast and cured, conforming to relevant IS standards. The scope includes transportation, handling, and secure fixing in position as per the approved design and drawing, including all necessary supports, fasteners, and sealants. |
| 9 | Providing and applying decorative paint of approved design, color, and finish, including the cost of all materials, labor, and surface preparation. The paint shall be of high quality, durable, and conforming to relevant IS standards. The scope includes cleaning, priming, and applying the decorative paint in multiple coats as per the manufacturer`s specifications and approved design. |
| 10 | Lacquered Glass Finish :Panels of 08 mm HDMR/Ply board exterior grade cold pressed with 6 mm Thick Lacquered Glass in design and pattern as per drawings fixed over a sub strata of 12 mm HDMR/Ply board exterior grade duly Fixed on base surface to the base frame.... |
| 11 | Providing and fixing phenolic partition board with door and hardware of approved design, including the cost of all materials, labor, and finishing. The partition board shall be made of high-pressure phenolic resin compact laminate, with a thickness of (specify thickness, e.g., 12 mm), conforming to IS standards. The door shall be of the same material and thickness, fitted with necessary hardware including hinges, handles, locks, and any additional accessories required for proper functionality and durability. |
| 12 | Providing and fixing 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern of approved quality including cutting and making good the floors etc complete as per direction of engineers charges. 100 mm nominal dia... |
| 13 | `Providing and fixing 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern of approved quality including cutting and making good the floors etc complete as per direction of engineers charges. 125 mm nominal dia |
| 14 | Water Supply Pumps and Drainage Sump Pumps, Equipments, Piping, Valves, Electrical Works and Accessories:Variable Speed Hydropneumatic System Supply, Installation, Testing and Commissioning of Factory assembled Compact self contained Hydropneumatic system comprising of following :Vertical, multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-316 shaft, C.I. Base and head, TEFC motor (with mechanical seal) Vendor to submit performance curves, dimension detail and technical catalogue of the proposed model for review and approval.`Panel mounted microprocessor PID controller and variable frequency drive (VFD) dedicated to each pump integrated in a single body or as separate components with pressure trancducer, minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port, sequencing for alternate running. All alarms should be displayed in the controller. System should be equipped with dry running protection along with necessary cable and cable tray.(Quantity of VFD = 1 No. per pump)`Pre-charged MS Powder coated diaphragm pressure vessel of 100 liter capacity with replaceable bladder suitable for 10 kg/sq.cm working pressure,connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete.Set of accessories such as pressure switches, pressure transducers, (butterfly valve, NRV of PN 10 rating) Vibration Isolator with unit control, vibration elimination pads, GI `heavy class` suction and delivery header and interconnection piping, level controller, dry running protection, pressure gauge inter connecting power and control cabling earthing, cable tray etc. complete with Vibration pads of required quantities. For Domestic Water SupplyCapacity/Flow rate - 40 LPMPumping Head - 15 M`Power Requirement (HP) - 10 HP each or as per manufacturer.`Location - Municipal Line OHT Filling1 Set = 2 Nos. Pump (1 Working plus 1 standby)... |
| 15 | Submersible Centrifugal pump - Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging transfer pumps complete with 3 phase motor with all necessary protection and mechanical seal etc. complete with all ancillaries including float type level controllers, electrical control panels fabricatd from 14 gauge CRCA sheet volt meter ammeter with selector switch, TPMCB, 5 VA CL : CTs, phase indicating lamps protected by 2 amp SP MCB, DOL starter, necessary wiring, cable alleys, earthing, interlocking, starter with Automatic float type level controller, providion of high level alarm, sequence timer, potential free contact to starter for connection to BAS, both pumps may run simultaneously at pre determind level. (1 Working plus 1 Standby).Vendor to submit proposed pump model with duty curve.Flow rate : 250 LPMHead : 15 M Solid Handling : 10-15 MMLocation : Basement Purpose : Plumbing Plant Room drainage and basementMOC : SS-304 body: SS-304 Impeller and ShaftSupply, installation, testing and commissioning of above item (including all necessary/required accessories).. |
| 16 | Construction of modular type rain water harvesting pit size (4x2.5x2m) (For Recharge purpose) including following items.Drilling of bore well: (30 metre)Injection well insertion Upvc pipe 6`` diameter having a load capacity of 6kg/sqmInjection well insertion slotted pipes for clog resistent of rain water and reducing possibility of carrying soild.Solvent and screws for joing pipes with each other also for joinig end caps and bell plugs for bore.Clamps for keeping the pipe safe and holding the pipe while to ground level.Bell plug - supplying and fixing of bell plug with each bore well.End caps - supplying and fixing of end caps at the top of each bore well.Supply of bentonite fore bore wells drilling in order to give support and prevent from collapsing.Gravel filling for packing of empty space in the bore and to provide stability to the inserted pipes.Compressor/Boki cleaning-Earth work excavation with JCB/excavators in all types of soil/Ordinary rock/Hard rock and with a lift up to 5 meter.Material for base work (gravel/ston chips and double washed river sand)DressingCompaction - of base soilSoil disposal - disposal of extracted soil from the site to inside the boundary walls of the building up to a maximumdistance of 0.5kmGeo textile - to avoid invasion of soil provide stability to the tank and improve quality of water within the tank with tensile strength.Modular RWH modules material (685x410x408 mm)Backfilling of the area constructed in and around after compacting them properly.FRP Micro filter capable of removing soilds.Riser for filter extension.... |
| 17 | Vertical/horizontal monoblock centrifugal transfer pumping set with SS body and SS impeller, SS shaft mechanical seal, connected to a TEFC induction motor suitable for 415 volts ± 3% phase 50 cycles AC supply with a common suction header with valves on main connecting and pumps inlet and a common delivery header with valves, includingt water shock absorber, non return valves with MS galvanized supports and painting with one coat of primer and two coats of synthetic enamel paint including a 100mm dia pressure gauge, Vibration eliminating pads under foundation, all mounted on a common base plate of MS 80x40mm I section bolted to RCC foundation, including control panel complete in all respects. FILTER FEED PUMPS No. of Pumps: 2 (1 Working plus 1 Stand by )Capacity : 100lpmHead : 30m.. |
| 18 | Providing and fixing Vertical Downflow Filter in MS fabricated in accordance with IS 2825 from minimum 6 mm thick M.S. plate on shell and minimum 8 mm thick M.S. plate on dished ends, epoxy coated construction.The filter shall have :a) One no. pressure tight manholes and at least one no. pressure tight side hole for maintenance purposes.b) Initial charge of Filter Media.c) Complete underdrain system and raw water distributor as per manufacturer`s design.Complete MS C Class frontal face piping conforming to IS:1239) and valves battery with CI Butterfly valves, pressure gauges and sampling points at inlet and outlet. etc. covering all functions of service, backwash, rinse, air release etc.e) Pressure gauges (100 mm dia bourdon type pressure gauge)/ sampling points as per manufacturer design.f) All internal parts of the filtration plant shall be coated with two coats of epoxy paint after thorough sand blasting. All external surfaces of the plant including piping shall be coated with two coats of red iron oxide/zinc chromate primer followed by two coats of high gloss enamel paint .g) The filter shall be complete with all gaskets/fasteners of standard quality as required.h) The filter shall be designed to give rated output at given raw water quality and flow rate without any operational problem and should not get any loss of performance as long as the operating pressure remains within the given range. Any additional provision is required to make the item complete, the same should be included herein.Dual Media filterCapacity - 6000 lph Filtration rate - 14500 lph/m2Filter dia approx. 800 mmWorking pressure: 4.5 kg/cm2 Test pressure : 7.0 kg/cm2.. |
| 19 | POST CHLORINATION OF WATERSupply Installation testing and commissioning of Online electronic chemical solution dosing system comprising of electronic metering pump (with both frequency and stroke length controls to control the dosage rate between 10-100 % of rated maximum capacity), virgin HDPE chemical grade solution tank of rquired capacity, necessary injection fitting assembly, foot valve cum strainer and suction and delivery tubing etc. upto the point of injection complete in all respects as required.For Cholorination of filtered waterDosing capacity : 0-6 ltrs. per hour, Dosing Head : 3.5 kg/cm2.. |
| 20 | Providing and fixing water softener fabricated from minimum 10mm thick M.S. plate on min. shell and 12mm thick M.S. plate on dished ends (Quality of Steel as per IS:2062 Grade B, thickness as per ASME Section 8) complete with initial charge of filter media and resins, face piping accessories, diaphragm valves of approved specifications, HDPE Brine tank of min. 500 Liters, piping testing and commissioning complete with resins of approved quality and make and regeneration assembly complete with valves, ejector, brine suction valves and piping. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration). All internal parts of the softener shall be rubber lined as per approved specifications.Raw water hardness 500 Mg/LTreated water harness 30 Mg/LRegeneration Period 8 Hrs.Capacity 100 LPM .... |
| 21 | Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14/16 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. Cadmium Plated hardware shall be used in fabrication of panels. complete with all respect.MCC for Plumbing systemIncoming1 Nos. 100A, 4P MCCB, 36KA, thermal magnetic based release (Ics = Icu = 100%) with with O/L , S/C protection as per specification and with following accessories1 No. Digital VIF meter and 3 nos. CTs of ratio 100/5A , Class I accuracy and 10 VA burden. digital multifunction meter suitable to measure voltage, Ampere, Frequency, 1 Set of phase indicating LED lamps with 2 amp back up MCB.Outgoings1 No. MCB of 32 Amp. i/c 7.5 KW DOL starter and providing outgoing feeder of 3 core, armoured coper cable of size of 6 Sq. mm to Heat pump. Each compartment shall contain auto / manual selector swtich and indicating and pushbutton lamps etc. as required.2No. MCB of 16 Amp. i/c 3.3 KW DOL starter and providing outgoing feeder of 3 core, armoured coper cable of size of 4 Sq. mm to filter feed pump (including 1 No. as standby). Each compartment shall contain auto / manual selector swtich and indicating and pushbutton lamps etc. as required.2No. MCB of 16 Amp. i/c 3.3 KW DOL starter and providing outgoing feeder of 3 core, armoured coper cable of size of 4Sq. mm tooht tansfer pump For Hot Water (including 1 No. as standby). Each compartment shall contain auto / manual selector swtich and indicating and pushbutton lamps etc. as required.32 amps 4P MCB for RO system 1 Nos.32 amps 4P MCB Spare 1 Nos.Notes :a. All MCBs shall be of 10 KA breaking capacity and suitable.b. Provision shall be made to ensure system protection from dry running of the pumpc. all pump one woring and one standby oprating with progamable timer.For Plumbing System as described above.... |
| 22 | Supply Insttalation, testing and commistioning of BMS compactable water meter for various functuion. i.e Municipal water supply line, Bore well supply line, Distribution line (munical, Flushing, Irrigation/Grdening, Rain water collection line.. |
| 23 | Supply Insttalation, testing and commistioning of BMS compactable water meter for various functuion. i.e Municipal water supply line, Bore well supply line, Distribution line (munical, Flushing, Irrigation/Grdening, Rain water collection line.. |
| 24 | CONSTRUCTION OF OFFICE BUILDING FOR MUNICIPAL CORPORATION FARIDABAD BALLABGARH ZONE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender