Tender For Repairs & Maintenance To C/F Pumps, Vt Pumps, Submersible Pumps Along With Connected Items Under Ge Nrc.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
14 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs & Maintenance To C/F Pumps, Vt Pumps, Submersible Pumps Along With Connected Items Under Ge Nrc.
BOQ
| Sl. No. | Item Description |
| 1 | Notes for Entire Work:-(i) Water Supply being an essential service to MES, the work shall be completed within -02 Days of handed over by Dept ,else penelty of Rs.1,0000 per day shall be imposed.(ii) If the work shall not be completed within 10 Days, the work shall be cancelled and PSD submitted by the Contractor will be forefitted. |
| 2 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep and getting out in soft loose soil all as specified and directed |
| 3 | Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed |
| 4 | Removing excavated soil to a distance not exce 50 m and deposited where directed at a level not exceding 1.5 m abvoe the starting point all as specified and directed. |
| 5 | M&L for taking out old rusted MS pipe line of size 300 mm by cutting with gas welding or any other means including Tees, bends, elbows etc complete all as specified |
| 6 | M&L for Dismantling PCC (Thrist block) of any description andin any position for removal of MS pipes completed all as specified as as dircted |
| 7 | Supply, laying & Jointing of ISI marked Mild Steel (ERW) flanged pipes 300 mm dia heavy duty (Class C) with 8 mm thickness including all fittings i.e. reducer, elbow, tees, flanges etc. including transportation material to site, jointing by welding providing coating, laying the pipes in tranches /on PCC blocks compele work in all respect all as specified and directed .Note : PCC & Earthwork shall be measured and paid seperatelyMake:- Tata/Jindal |
| 8 | Cutting existing cast iron pipe 300 mm dia in position for insertion of new pipe/tees, branches etc. |
| 9 | Cutting existing cast iron pipe 250 mm dia in position for insertion of new pipe/tees, branches etc. |
| 10 | Cutting existing cast iron pipe 200 mm dia in position for insertion of new pipe/tees, branches etc. |
| 11 | Cutting existing cast iron pipe 150 mm dia in position for insertion of new pipe/tees, branches etc. |
| 12 | Cutting existing cast iron pipe 100 mm dia in position for insertion of new pipe/tees, branches etc. |
| 13 | Taking up 300 mm dia CI water pipe mains incuding flanged rubber joints with spigot and socketed ends and lead joint including burning out joints and recovering lead. |
| 14 | Taking up 250 mm dia CI water pipe mains incuding flanged rubber joints with spigot and socketed ends and lead joint including burning out joints and recovering lead. |
| 15 | Taking up 200 mm dia CI water pipe mains incuding flanged rubber joints with spigot and socketed ends and lead joint including burning out joints and recovering lead. |
| 16 | Taking up 150 mm dia CI water pipe mains incuding flanged rubber joints with spigot and socketed ends and lead joint including burning out joints and recovering lead. |
| 17 | Taking up 100 mm dia CI water pipe mains incuding flanged rubber joints with spigot and socketed ends and lead joint including burning out joints and recovering lead. |
| 18 | Supply and laying 300 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed.Note :- Excavation, Earthwork, DI fittings shall be measured and paid seperately under respective items. |
| 19 | Supply and laying 250 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 20 | Supply and laying 200 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 21 | Supply and laying 150 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 22 | Supply and laying 100 mm dia DI pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast, Class LA, laid in trenches complete all as specified and directed. |
| 23 | M&L for 300 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 24 | M&L for 250 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 25 | M&L for 200 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 26 | M&L for 150 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 27 | M&L for 100 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 28 | M&L for 80 mm dia run lead joints for water mains with spigot & socket pipes and fittings, all as specified and directed. |
| 29 | S&F 300 mm dia rubber tyton joint. |
| 30 | S&F 250 mm dia rubber tyton joint. |
| 31 | S&F 200 mm dia rubber tyton joint. |
| 32 | S&F 150 mm dia rubber tyton joint. |
| 33 | S&F 100 mm dia rubber tyton joint. |
| 34 | S&F 80 mm dia rubber tyton joint. |
| 35 | S&F 300 mm dia with 06 holes machanical joint / Coller ISI marked for spigot end pipe. |
| 36 | All as per Itme No. 35.00 above but 250 mm dia with 06 holes |
| 37 | All as per Itme No. 35.00 above but 200 mm dia with 06 holes |
| 38 | All as per Itme No. 35.00 above but 150 mm dia with 04 holes |
| 39 | All as per Itme No. 35.00 above but 100 mm dia with 04 holes |
| 40 | All as per Itme No. 35.00 above but 80 mm dia with 04holes |
| 41 | Taking up or down 15 mm dia GI tubing and connections including cleaning for refixing or sold under Sch of credit. |
| 42 | Taking up or down 20 mm dia GI tubing and connections including cleaning for refixing or sold under Sch of credit. |
| 43 | Taking up or down 25 mm dia GI tubing and connections including cleaning for refixing or sold under Sch of credit. |
| 44 | Taking up or down 40 mm dia GI tubing and connections including cleaning for refixing or sold under Sch of credit. |
| 45 | Taking up or down 50 mm dia GI tubing and connections including cleaning for refixing or sold under Sch of credit. |
| 46 | Relaying of 15mm dia GI tube obtained from taking down, incl renewal of threading if required, fixed to walls or laid in floor or to be concealed wherever directed and jointing with new fitting such as socket, bends, elbows, union etc complete. |
| 47 | Relaying of 20 mm dia GI tube obtained from taking down, incl renewal of threading if required, fixed to walls or laid in floor or to be concealed wherever directed and jointing with new fitting such as socket, bends, elbows, union etc complete. |
| 48 | Relaying of 25mm dia GI tube obtained from taking down, incl renewal of threading if required, fixed to walls or laid in floor or to be concealed wherever directed and jointing with new fitting such as socket, bends, elbows, union etc complete. |
| 49 | Relaying of 40 mm dia GI tube obtained from taking down, incl renewal of threading if required, fixed to walls or laid in floor or to be concealed wherever directed and jointing with new fitting such as socket, bends, elbows, union etc complete. |
| 50 | Relaying of 50 mm dia GI tube obtained from taking down, incl renewal of threading if required, fixed to walls or laid in floor or to be concealed wherever directed and jointing with new fitting such as socket, bends, elbows, union etc complete. |
| 51 | Supply and laying 15 mm dia GI tubing medium grade with all fittings and fixed complete laid in trenches/on wall/Ceiling. |
| 52 | Supply and laying 20 mm dia GI tubing medium grade with all fittings and fixed complete laid in trenches/on wall/Ceiling. |
| 53 | Supply and laying 25 mm dia GI tubing medium grade with all fittings and fixed complete laid in trenches/on wall/Ceiling. |
| 54 | Supply and laying 40 mm dia GI tubing medium grade with all fittings and fixed complete laid in trenches/on wall/Ceiling. |
| 55 | Supply and laying 50 mm dia GI tubing medium grade with all fittings and fixed complete laid in trenches/on wall/Ceiling. |
| 56 | Supply and laid 150 mm dia spigot and socketed DI fittings such as bends (any type radius and angle), tapers, tees, collars, tail piece socket, flanged/spigot etc. |
| 57 | Supply and laid 200 to 300 mm dia spigot and socketed DI fittings such as bends (any type radius and angle), tapers, tees, collars, tail piece socket, flanged/spigot etc. |
| 58 | Area clearance/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed.Note 1. The cost of POL included in quotated rates .2. After Start and finsh of the work hours slips shall be provided by the contrcator3. LOG Sheet shall be maintained duly signed by Engineer-in-Charge & JE. |
| 59 | M&L for Earthing in replacement complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of plate not less than 1.5 m below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 m long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per electric Plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”. |
| 60 | S&F galvannised strip 32x6mm with saddles and fixing screws etc. complete all as specified and directed. |
| 61 | Taking out of centrifugal pump set 150 HP from pump foundation after disconnection from motor and transportation to workshop, dismantling the pump for repair/ overhauling including cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish, necessary polishing etc and installing back, helium gasket sheet not less than 1mm thick complete all as specified and directed. Make -Kirloskar, DSM 150X45 Note:(i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates. |
| 62 | (a) Supply only Casing Wear Ring- |
| 63 | (b) Supply only shaft sleeve- |
| 64 | (c) Supply only Inter Stage Ring- |
| 65 | (d) Supply only Ball bearing SKF - 7310 |
| 66 | (e) Supply only Ball bearing SKF - 6310 C3 |
| 67 | (f) Supply only Bearing cartridge DE |
| 68 | (g) Supply only Bearing cartridge NDE |
| 69 | (h) Supply only shaft sleeve Nuts |
| 70 | (j) Supply only Split Gland |
| 71 | Taking out of centrifugal pump set 125 HP from pump foundation after disconnection from motor and transportation to workshop, dismantling the pump for repair/ overhauling incluiding cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and installing back including helium gasket sheet not less then 1mm thick all as specified and directed.Make: Kirloskar, DSM 125X40 Note: (i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates. |
| 72 | (a) Supply only Casing Wear Ring |
| 73 | (b) Supply only shaft sleeve |
| 74 | (c) Supply only Inter Stage Ring |
| 75 | (d) Supply only Ball bearing SKF - 7309 |
| 76 | (e) Supply only Ball bearing SKF - 6309 |
| 77 | (f) Supply only Bearing cartridge DE |
| 78 | (g) Supply only Bearing cartridge NDE |
| 79 | (h) Supply only shaft sleeve Nuts |
| 80 | (j) Supply only Split Gland |
| 81 | M&L for taking up vertical turbine pump 175 HP/180 HP (Dharna Pump House) multi stage oil lubricated type B-350-9-200 from jack well after disconnection of electrical connection earthing lines and transportation to local workshop for repairs / overhaulling of pump including dismantling the assembly, cleaning all parts of pump assembly thoroughly and finding out the defects segregating the serviceable spare parts for reuse and including machine work, reassembling the pump set after successful repair and lowering to the existing position and refixing and testing complete all as specified and directed.Make Jyoti Ltd. Note:-(i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates. |
| 82 | (a) supply only Impeller Holding Split ring CI |
| 83 | (b) Supply only Bowl bearing - Bronze |
| 84 | (c) Supply only Top Bowl bearing - Bronze |
| 85 | (d) Supply only Lantern ring |
| 86 | (e) Supply only Impeller shaft packing ring - Bronze |
| 87 | (f) Supply only Discharge case bearing - Bronze |
| 88 | (g) Supply only Impeller shaft coupling - AISI410 |
| 89 | (h) Supply only Line shaft bearing Bronze |
| 90 | (j) Supply only Glide spider - CI |
| 91 | (k) Supply only Rubber guide ring - STD |
| 92 | (l) Supply only Rubber guide ring Circlip - STD |
| 93 | (m) Supply only Gland packing - STD |
| 94 | (n) Supply only Gland packing ring - Aluminium |
| 95 | (o) Supply only Impeller with seal ring Bronze |
| 96 | (p) Supply only motor rachet |
| 97 | M&L for taking up submersible pump 20 HP multi stage Model No B 93/1 from well after disconnection of electrical connection and transportation to local workshop for repairs / overhaulling of pump including dismantling the assembly, cleaning all parts of pump assembly thoroughly and finding out the defects segregating the serviceable spare parts for reuse and including machine work, reassembling the pump set after successful repair and refixing to the existing position and testing complete all as specified and directed.Make: Amrut Note:-(i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates. |
| 98 | (a) Supply only Spacer Sleeve |
| 99 | (b) Supply only Top Sleeve |
| 100 | (c) Supply only Lock Washer |
| 101 | (d) Supply only Thrust Washer |
| 102 | (e) Supply only Bearing Sleeve for Bowl / machanical seal |
| 103 | (f) Supply only Bearing Bush GM for Bowl l / machanical seal |
| 104 | (g) Supply only Neck Ring (Wear Ring) |
| 105 | (h) Supply only Oil Seal |
| 106 | (j) Supply only Bearing Bush GM for IP/l / machanical seal |
| 107 | Taking up Submersible Pump assembly including column pipe approx 50 to70 m using chain pulley block manually and carrying out following phase of work all as directed for 5HP/3 HP/1 HP Pump Set.(i) Transportation of submersible pump motor assembly for necessary repair. (ii) Carrying out overhauling of motor assembly 3 phase, taking out burnt winding wire, rewinding using super enamelled copper winding wire of appropriate gauge and turn, providing insulation materials and replacement of bearing and assembling with repaired/serviceable pump and testing complete all as directed.(iii) Carrying out dismantling and overhauling of multi stage pump, incl cleaning and derusting of casing, replacement of worm out spare like bearings, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, machining all as required & assembling testing at workshop complete for 5 HP submersible pump of any make including carrying out painting by two coat of synthetic enamelled paint over a coat of primer, assembling the pump and motor including testing complete.Note:-(i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates. |
| 108 | (a) Supply only Impeller key |
| 109 | (b) Supply only Lantern ring |
| 110 | (c) Supply only Impeller shaft ring |
| 111 | (d) Supply only thrust Ball bearing SKF |
| 112 | (e) Supply only Water Seal |
| 113 | (f) Supply only Motor pump couple bush with key |
| 114 | (g) Supply only Impeller |
| 115 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles, and taking out to local workshop induction motor 175 HP/180 HP for repair purpose including complete cleaning, varnishing, reinsulation and replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. Note:-(i) T&P and transportation to workshop & return is included in quotated rates(ii) Rewinding will be measure & paid seperately under relavant item of Sch. |
| 116 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles and taking out to local workshop submersible induction motor 20 HP for repair purpose including complete cleaning, varnishing, insulation, replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. Note:-(i) T&P and transportation to workshop & return is included in quotated rates(ii) Rewinding will be measure & paid seperately under relavant item of Sch. |
| 117 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles and taking out to local workshop induction motor 150/125/110/100 HP for repair purpose including complete cleaning, varnishing, insulation replacement of DE /NDE bearings and greasing and including shifting back to location as directed, installing, testing and commissioning after repair complete all as specified and directed.Note: Rewinding will be measure & paid seperately under relavant item of Sch. |
| 118 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles and taking out to local workshop induction motor 15/10 HP/7.5 HP 1440 RPM for repair purpose including complete cleaning, varnishing, insulation replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. Note:-(i) T&P and transportation to workshop & return is included in quotated rates(ii) Rewinding will be measure & paid seperately under relavant item of Sch. |
| 119 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles, 5 HP, 900 RPM capacity motors from respective non clogging centrifugal pumps/open well submersible pumps, other rotating mechanism etc, removing from foundations, dismantling rotor and stator, bearings, cleaning the dust/dirt, overhauling thoroughly including complete varnishing and reinsulation replacement of DE/NDE bearings, greasing, reassembling the motor, mounting on the foundations, coupling with non clogging centrifugal pumps/respective mechanism, making the electrical connections, testing and commissioning all as directed. Note:-(i) T&P and transportation to workshop & return is included in quotated rates(ii) Rewinding will be measure & paid seperately under relavant item of Sch |
| 120 | Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles and taking out to local workshop induction motor 3HP/1 HP 1440 RPM for repair purpose including complete cleaning, varnishing, insulation replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. Note: Rewinding will be measure & paid seperately under relavant item of Sch. |
| 121 | M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations for the Pump 175/180 HP at Dharna pump House as directed.Note: T&P and Transportation requried included in the Quatod Rate |
| 122 | M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations for the Pump 150 to 100 HP at Waldevi pump House as directed.Note: T&P and Transportation requried included in the Quatod Rate. |
| 123 | M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations for the Pump 20 to 3 HP at Arty centre as directed.Note: T&P & Transportation requried included in the Quatod Rate. |
| 124 | S&F in repair Contactor MNX140 160A U 1000V with Auxiliary contact ie AC-15:4A, 415V suitable for use on a circuit capable of delevering not more than 1000 RMS Symmetrical Ampre 600 Volts max fuze 225 A RK5 time delay type.Make : L&T or Equivalent in SIEMENS/ABB |
| 125 | S&F in repair Fully Automatic Star Delta Motor starter 3 phase 66 150 HP MN 140 FASD in sheet-steel enclosure type MK-1S (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 9-14 and taking down.Make : L&T or Equivalent in SIEMENS/ABB |
| 126 | Dismantling/Removing of Air compressor after disconnecting all electrical connetions and removing nuts & bolts etc, from foundation. Dismantling the compressor head, removing all defective parts as appended below, taking of compressor head, reassembling the compressor head after replacement of head gasket and other defective parts, as required including cleaning, servicing and overhauling the compressor. Reinstallation, commissioning and testing complete and replacement of compressor oil, all as specfied and directed. Make ELGI Capacity 10 Kg/Cm2Note:-(i) Spares as required shall be measure & paid seperately against the relevant items as supply only(ii) T&P and transportation to workshop & return is included in quotated rates |
| 127 | (a) Supply only Piston Ring - 04 Nos |
| 128 | (b) Supply only Bush Bearing - 02 Nos |
| 129 | (c) Supply only Connecting rod bush - 02 Nos |
| 130 | (d) Supply only Piston Pin - 02 Nos |
| 131 | (e) Supply only Scrapper Oil Ring - 04 Nos |
| 132 | (f) Supply only Piston - 02 Nos |
| 133 | (g) Supply only Safety Valve - 01 Nos |
| 134 | (h) Supply only Piston Pin bush - 02 Nos |
| 135 | (i) Supply only Fan belt - 02 Nos |
| 136 | S&F in repair MCCBs of 800 Amps 4 pole 50 kA, frame size SKB-3 adjustable thermal setting 70-100% Model No -I830416 (L&T) as directed. |
| 137 | S&F in repair MCCB 400 Amps 4 pole 50 kA, Conforms to IS/IEC 60947 -2 as directed. |
| 138 | S&F in repair MCCB 250 Amps 4 pole 50 kA, Conforms to IS/IEC 60947 -2 as directed. |
| 139 | S&F in repair 100mm dia valve operating wheel cap (Cast iron) inserting of nut bolt with 20 mm GI pipe length 4 m long with Tee rod. |
| 140 | S&F in repair 150mm dia valve operating wheel cap (Cast iron) inserting of nut bolt with 20 mm GI pipe length 4 m long with Tee rod. |
| 141 | S&F in repair 200mm dia valve operating wheel cap (Cast iron) inserting of nut bolt with 20 mm GI pipe length 4 m long with Tee rod. |
| 142 | Collecting samples of water from waldevi filteration plant / OH tanks inside the Arty centre/waldevi RAW water UG sump in sterlized bottle and testing is per IS 10500:2012 and upto latest revision for Organic & physical parameters, odour, PH, TDS, Turbidity, all substances undesirable in excessive at Distt Public Health laboratory Nashik /Govt lab and submitting test report all as directed |
| 143 | M&L for rectification of water lekage pipe line size upto 80 mm to 300 mm pipe of any type (CI/GI/DI) including necessary excavation, joints, pipes etc all as specified and directed.Note : Excavation and eartwork, fittings, pipe etc shall be measured and paid under respective items of Schedule. |
| 144 | NOTE: AMOUNT OF SCHEDULE OF CREDIT Rs. 5,32,535.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 days