|
| 1 | Providing and laying in position cement concrete of pecified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : .6.4 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.4.1 |
| 8 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7 |
| 9 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps .17.7.3 |
| 10 | Providing and fixing white vitreous china water closet squatting pan(Indian type) : .17.13 |
| 11 | Orissa pattern W.C. pan of size 580x440 mm .17.13.2 |
| 12 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan .17.15 |
| 13 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 14 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19 |
| 15 | 10 litre (full flush) capacity-white .17.19.1 |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : .17.2 |
| 17 | White solid plastic seat with lid .17.20.1 |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 19 | Flexible pipe .17.28.2 |
| 20 | 32 mm dia .17.28.2.1 |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. .17.31 |
| 22 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.6 |
| 23 | 100 mm inlet and 75 mm outlet .17.60.2 |
| 24 | Sand cast iron S&S as per IS - 3989 .17.60.2.1 |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. .18.1 |
| 26 | 15 mm dia nominal bore .18.10.1 |
| 27 | 20 mm dia nominal bore .18.10.2 |
| 28 | Providing and fixing gun metal gate valve with C.I wheel of approved quality .18.17 |
| 29 | 20 mm nominal bore .18.17.1A |
| 30 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : .18.18 |
| 31 | 15 mm nominal bore .18.18.1 |
| 32 | 20 mm nominal bore .18.18.2 |
| 33 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 34 | 30 cm length .18.21.1 |
| 35 | 15 mm nominal bore .18.21.1.1 |
| 36 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : .18.31 |
| 37 | 150 mm diameter .18.31.3 |
| 38 | Class II .18.31.3.2 |
| 39 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork) : .18.46 |
| 40 | 15 mm nominal bore .18.46.1 |
| 41 | 20 mm nominal bore .18.46.2 |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 43 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49 |
| 44 | 15 mm nominal bore .18.49.1 |
| 45 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53 |
| 46 | 15 mm nominal bore .18.53.1 |
| 47 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A |
| 48 | Providing and fixing PTMT bib cock of approved quality and colour. .18.54 |
| 49 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms .18.54.2 |
| 50 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. .18.62 |
| 51 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms .18.62.1 |
| 52 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms .18.62.2 |
| 53 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards. .NSR |
| 54 | 15 mm nominal bore . |
| 55 | Providing and fixing of CP Long Bend 32mm dia of cistern .NSR |
| 56 | Construction of curb with CC 1:2:4 along with upto 1 depth for made it proof water including cost of sand, Bajri complete in all respcet .NSR |
| 57 | Providing and fixing drip seal complete in all respect. .NSR |
| 58 | 75 mm . |
| 59 | 100 mm . |
| 60 | Providing and fixing of S.S. Grating of approved make .NSR |
| 61 | Providing and fixing gun metal gate valve with C.I wheel of approved quality .NSR |
| 62 | 15 mm nominal bore . |
| 63 | Providing and fixing of SFRC G.T. cover 375x375x25 mm thick made out of M.S. angle iron size 25x25x5 mm thick with fixing wire mash 1\\"x1\\" of 10 guage including cutting welding and fixing with cement concrete 1:1 1/2:3 complete .NSR |
| 64 | Providing and fixing of SFRC inspection chamber cover 600x600x35 mm thick made out of M.S angle iron size 35x35x5 mm and TMT bars 10 mm i/d both sides including cutting welding and fixing with cement concrete 1:1 1/2:3 complete .NSR |
| 65 | Providing and fixing of PVC fitting for L/L cistern .NSR |
| 66 | Providing and fixing of PVC handle for L/L cistern complete in all respect as per entire satisfaction of EIC and make as approved by Engineer in charge .NSR |
| 67 | Providing and fixing of PVC ball cock for L/L cistern .NSR |
| 68 | Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make .NSR |
| 69 | 500 to 1000 ltr. Cap. . |
| 70 | Providing and fixing C.P Spindle 4 No complete in all respect .NSR |
| 71 | Providing and fixing C.P Spindle 5 No complete in all respect .NSR |
| 72 | Providing and fixing Half turn spindle complete in all respect .NSR |
| 73 | Providing and fixing of CP Short Bend complete in all respect .NSR |
| 74 | Providing and fixing Kit washer complete in all respect .NSR |
| 75 | Providing and fixing CP Tap washer complete in all respect .NSR |
| 76 | Providing and fixing PVC connection washer complete in all respect .NSR |
| 77 | Providing and fixing in position of towel rails in with rawel plugs embedded in wall with C.P Brass screw .NSR |
| 78 | Providing and fixing of C.P towel ring with brass screw make Viking or equivalent .NSR |
| 79 | Providng and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respect including curring and making good the wall etc. .NSR |
| 80 | Providing and fixing of PVC pipe 4 inch dia of 6kg pressure complete in all respect .NSR |
| 81 | Providing and fixing of PVC pipe 3 inch dia of 6kg pressure complete in all respect .NSR |
| 82 | Providng and fixing of HCI P trap 4\\" dia complete in all respect .NSR |
| 83 | Providing and fixing CP Shower with arm complete in all respect .NSR |
| 84 | Providing and fixing CP brass pillar taps of approved quality .NSR |
| 85 | Providing and fixing Dhaga complete in all respect .NSR |
| 86 | Providing and fixing White cement complete in all respect .NSR |
| 87 | Providing and fixing M Seal complete in all respect .NSR |
| 88 | Providing and fixing CP Waste complete in all respect .NSR |
| 89 | Providing and fixing Sink Waste complete in all respect .NSR |
| 90 | Providing and fixing Hand Shower (Health Faucet) (ABC Body) with 1 metre long easy flex tube in chrome finish and wall hook complete make Jaquar model ALD - 565 or equal vent in the same price range of AOR .NSR |
| 91 | Providing and fixing of C.P toilet roll holder make Jaquar range CON model ACN 1151 N or equal vent in the same price range of AOR .NSR |
| 92 | Providing and fixing of C.P Bib cock short body make Jaquar 047 KN/ 5 complete in all respect .NSR |
| 93 | Providing and fixing of C.P Bib cock long body make Jaquar CAT no. 107 KN complete in all respect or equal vent in the same price range of AOR .NSR |
| 94 | Providing and fixing of angular stop cock with wall flange 15 mm i/d Jaquar continental CAT no. 059 or equal vent in the same price range of AOR .NSR |
| 95 | Providing and fixing of G.I tank nipple complete in all respect. .NSR |
| 96 | 15mm . |
| 97 | 20mm . Please Enable Macros to View BoQ information |
