Tender For Special Replacement To Bldg No Et-109 At Diglipara Under Ge Rangia
Tender Value
41.65 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
13 days left
EMD
83300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baksa → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Replacement To Bldg No Et-109 At Diglipara Under Ge Rangia - 1 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc. 1.5 Sq. M Each, Complete All As Specified And As Directed By Engineer-In-Charge. 2 M&L For Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.5 Sq. M But Not Exc. 4.0 Sq. M Each, Complete All As Specified And As Directed By Engineer-In-Charge. 3 Dismantling Framed Trussess (Wooden) Of Span Upto 10 Mtr, Complete All As Specified And As Directed By Engineer-In-Charge. 4 Dismantling Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position And In Unframed Work, Complete All As Specified And As Directed By Engineer-In-Charge. 5 M&L For Hardcore With Broken Stones/ Boulders Of Gauge N Exc. 63 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And As Directed By Engineer-In-Charge. 6 M&L For Reinforced Cement Concrete, M-20 (Nominal Mix), 1:1½:3, Type A-1 (20Mm Graded Stone Aggregate) In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like, Including Demolition Of Existing Old Damaged Rcc, Complete All As Per Specified And As Directed By Engineer-In-Charge.. Note : Reinforcement & Formwork Will Be Measured And Paid Separately Under Relevant Item.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 2 | M&L for taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but not exc. 4.0 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 3 | Dismantling framed trussess (wooden) of span upto 10 mtr, complete all as specified and as directed by Engineer-in-charge. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section, in any position and in unframed work, complete all as specified and as directed by Engineer-in-charge. |
| 5 | M&L for Hardcore with broken stones/ boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for Reinforced Cement Concrete, M-20 (Nominal Mix), 1:1½:3, type A-1 (20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including demolition of existing old damaged RCC, complete all as per specified and as directed by Engineer-in-charge.. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item. |
| 7 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished flat surfaces of concrete, complete all as specified and as directed by Engineer-in-charge. |
| 8 | S&F of TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engineer-in-charge. |
| 9 | S&F of TMT bars 6-8mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engineer-in-charge. |
| 10 | S&F of Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed by Engineer-in-charge. |
| 11 | S&F of mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by Engineer-in-charge. |
| 12 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube; complete all as specified and as directed by Engineer-in-charge. |
| 13 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 15 | S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement; complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 17 | S&F of factory made 30mm thick Solid Plain WPC (Wood polymer Composite) wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension rade), calcuim carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and non toxic additives, made from extrusion process WPC foam sheet Single extruded (Inner) with having minimum density not less than 650 kg/cum, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being termite/Borer free, water/moisture proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be paneled with and including mesh with self-tapping round headed screws at required distance, screws and edges covered with feathered edge beading all-around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos aluminium barrel tower bolts of extruded section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos aluminium handles, 125 mm long, (ISI Marked conforming to IS 208-2020), 01 No. of helical door spring of 300 mm length, complete all as specified and as directed by Engineer-in-Charge. Note : 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company. 2. The rate of 03 Nos stainless steel butt hinges 100mm long with stailessed steel screws for each, 02 Nos aluminium barrel tower bolts of extrude section, 150 mm long (ISI Marked), 2 Nos aluminium handles, 125 mm long, (ISI marked), 01 No. of helical door spring of 300 mm length are inclusive in this item and nothing shall be paid extra on this item . 3. The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. Please Enable Macros to View BoQ information |
| 18 | S&F of factory made 30mm thick Solid Plain WPC (Wood polymer Composite) wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension rade), calcuim carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and non toxic additives, made from extrusion process WPC foam sheet Single extruded (Inner) with having minimum density not less than 650 kg/cum, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with Property of being termite/Borer free, water/moisture proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be paneled with and including mesh with self-tapping round headed screws at required distance, screws and edges covered with feathered edge beading all-around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos aluminium barrel tower bolts of extruded section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos aluminium handles, 125 mm long, (ISI Marked conforming to IS 208-2020), 01 No. of helical door spring of 300 mm length, complete all as specified and as directed by Engineer-in-Charge. Note : 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company. 2. The rate of 03 Nos stainless steel butt hinges 100mm long with stailessed steel screws for each, 02 Nos aluminium barrel tower bolts of extrude section, 150 mm long (ISI Marked), 2 Nos aluminium handles, 125 mm long, (ISI marked), 01 No. of helical door spring of 300 mm length are inclusive in this item and nothing shall be paid extra on this item . 3. The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 days