Tender For Special Repair To Bldg No Oq-28 A/E (Single Jco Living Near Jco Mess) At Jutogh Under Ge (I) Jutogh
Tender Value
20.98 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
41960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Oq-28 A/E (Single Jco Living Near Jco Mess) At Jutogh Under Ge (I) Jutogh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Change in Schedule of Credit. | Other | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick on surfaces other than fair faces of brick work in cement mortar 1:6, finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound of approved make @200ml per bag of cement including necessary scaffolding and other safety measures up to 10 meter height complete all as specified and directed. |
| 4 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper including priming coat over a coat of 3mm thick wall care putty on plastered surface complete all as specified and directed. |
| 5 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutter not exc 1.5 sqm each (without taking off shutters from frames) and removing from site including dismantling brick/stone masonry for hold fast complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutter exc 1.5 sqm but n exc 4.0 Sqm each (without taking off shutters from frames) and removing from site including dismantling brick/stone masonry for hold fast complete all as specified and directed. |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 9 | S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 10 | M&L for IInd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 11 | S&F of factory fabricated flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | S&F 2nd class hardwood factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitered fitted with cut and mitered beads for securing glass/gauge etc. with sizes of members of shutters as specified in Para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 13 | S&F galvanized mild steel wire cloth 0.56mm fixed nominal dia of wire and avrg width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, fixed with wooden beading complete all as specified and directed. |
| 14 | S&F aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified and directed. |
| 15 | S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 16 | S & F barrel tower bolts aluminium anodised extruded section of size 200 mm, complete all as specified and directed. |
| 17 | S&F aluminium (Cast type) anodized handles of size 125 mm complete all as specified and directed. |
| 18 | S&F in repair floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors complete all as specified and directed. |
| 19 | M&L for preparation of new or previously untreated surface of wood or board materials of any description not otherwise described over 10cm in or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 20 | M&L for preparation of old painted steel surfaces including preparation of surfaces and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 21 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed. |
| 22 | M&L for stone walling of random rubble stone masonry, brought up to courses, well bounded, bedded & solidly hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed |
| 23 | M&L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in Cement mortar 1:6, complete all as specified and directed. |
| 24 | M & L for raised pointing to random or polygonal rubble uncoursed or brought up to course stone masonry in Cement mortar (1:4) complete all as specified and directed. |
| 25 | Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed. |
| 26 | M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concretes, sub base of floor complete all as specified and directed. |
| 27 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 28 | M&L for Non skid ceramic coloured tiles square/rectangular of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of tiles over & including screed bed of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 29 | M&L for glazed ceramic coloured tiles of size 350x250x7mm thick/450x350x7 mm thick on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the existing surface over & including backing coat plaster of 10 mm thick in CM (1:4) complete all as specified. |
| 30 | M&L for coloured digital vitrified tiles 10mm thick of any shade in floor not exc 0.36sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding layer 15mm in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 31 | All as per Item No 30 above but on vertical surface as in dados/skirting over 10mm thick plaster as backing coat in cement mortar 1:4 complete all as specified. |
| 32 | Dismantling of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition complete all as specified and directed. |
| 33 | M&L for reinforced cement concrete 1:2:4, (nominal mix), type B-0, using 12.5mm graded crushed stone aggregate as in Chajjas slab and the like, complete all as specified and directed. |
| 34 | Use & Waste of formwork to Chajjas, slab, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed. |
| 35 | S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 36 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 37 | M&L for granite stone slab 18 to 19 mm thick machine cut polished, bedded and jointed in grey cement slurry and pointed in white cement with admixture of pigment to match shade of granite stone with and including screed bed of 20mm thick in CM 1:6, complete all as specified and directed. |
| 38 | M&L for 20 to 25 mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slab, grinding and polishing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above. |
| 39 | Taking up or down steel tubing and connections of 15mm bore pipe, including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 40 | Taking up or down steel tubing and connections of 20mm bore pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed. |
| 41 | S&F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors ,complete all as specified and directed. |
| 42 | S&F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 43 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed. |
| 44 | Dismantling water tanks of capacity exc 500 & n.exc 1000 liters and removing from site to store, complete all as specified and directed. |
| 45 | S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position on roof, complete all as specified and directed. |
| 46 | S&F ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 47 | S&F in repair angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 48 | S&F in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 49 | S&F in repair of Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap, as per requirement, complete all as specified and directed. |
| 50 | S&F in repair 10 liters capacity, PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 51 | S&F PVC water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 52 | S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm, including fixing accessories like galvanised brackets & rag bolts, 32 mm CP waste coupling, complete all as specified and directed. |
| 53 | S&F health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 54 | S&F in repair brass Chromium plated WHB Mixer valve for mixing hot and Cold water screwed down for 15mm dia iron pipe, complete all as specified and directed. |
| 55 | S&F in repair brass Chromium plated wall mixer for mixing hot and Cold water with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore, complete all as specified and directed. |
| 56 | S&F in repair brass chromium plated shower rose 125mm size with or without swivel joint in, complete all as specified and directed. |
| 57 | Supply only factory made 600 x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 58 | S&F in repair chromium plated towel rail 20mm dia 'D' type 600 mm long of approved quality complete all as specified and directed. |
| 59 | S&F in repair chromium plated brass soap dish of approx size 160mm x 90mm fixed to wall with chromium plated brass screws , complete all as specified and directed. |
| 60 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 61 | Dismantling of cast iron/ reinforced concrete drain pipe/pvc pipes of Internal dia 100/ 110mm, jointed in cement mortar including all its accessories and taking out of trenches/floor/wall as required complete all as specified and directed. |
| 62 | S&F 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 63 | S&F 110mm dia PVC (SWR) pipes single socketed for soil, waste and vent pipes, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 64 | S&F PVC (SWR) bends for 110mm bore pipes, with or without access doors as required, complete all as specified and directed. |
| 65 | S&F PVC (SWR) vent cowl of bore 110mm, complete all as specified and directed. |
| 66 | S&F stack clamp made out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe, complete all as specified and directed. |
| 67 | Dismantling of cast iron/reinforced concrete drain pipe/pvc pipes of Internal dia 75mm, jointed in cement mortar incl all its accessories and taking out of trenches/floor/wall as required complete all as specified and directed. |
| 68 | S&F 75mm dia PVC (SWR) pipes single socketed for soil, waste and vent pipes, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends for 75mm bore pipes, with access doors complete all as specified. |
| 70 | S&F PVC (SWR) floor trap 75mm, plain with SS grating including jointing with solvent cement, complete all as specified and directed. |
| 71 | M&L for salt-glazed stone ware gully traps, 150mm x 150mm square or round mouthed, type \\"P\\" setting and jointing to drains with CM 1:1, complete all as specified and directed. |
| 72 | Cutting into existing manholes for 150 mm dia pipe connecting new drain making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, finished smooth good to pipe complete to match with the existing works, complete all as specified and directed. |
| 73 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level, complete all as specified and directed. |
| 74 | M&L for plain cement concrete 1:3:6, type C-1, using 20 mm graded crushed stone aggregate as in surface channel/drains including use and waste of necessary formwork, complete all as specified and directed. |
| 75 | M&L for plain cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate, 75mm thick as in plinth protection/ pavement and the like, finishing the surfaces even and fair without using extra cement, complete all as specified and directed. |
| 76 | M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring, complete all as specified and directed. |
| 77 | M&L for chequered cement concrete tiles 20cmx20cmx22-25mm thick, over 20mm thick screed bed in Cement mortar (1:6) set jointed and pointed in neat cement slurry as in floors and steps etc with grey cement and pigment complete all as specified and directed. |
| 78 | M&L for endura stone/ parking tiles of size 300 x 300 x 10mm thick as in floors over and including 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 79 | Dismantling for Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including necessary scaffolding and other safety arrangement, complete all as specified and directed. |
| 80 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl necessary arrangement for scaffolding and other T&P etc., complete all as specified and directed. |
| 81 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 82 | S&F plain, galvanized, mild steel sheeting of thickness 1mm as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and joints are welded or soldered, complete all as specified and directed. |
| 83 | Dismantling timber scantling, framed work of size 40 Sqcm and over in section in any position fixed with nails etc., complete all as specified and directed. |
| 84 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, battens etc under 40 Sqcm in section in any position fixed with nails etc., complete all as specified and directed. |
| 85 | Dismantling wrought iron or mild steel work of any description and any work not otherwise provided, complete all as specified and directed. |
| 86 | M&L for Second class hard-wood wrought timber as in scantling, in struts, tie beams, rafters etc. framed and fixed, complete all as specified and directed. |
| 87 | S&F mild steel work in roof trusses, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, tubular, channel or flat sections) including distance pieces cleats Fe 410-W, (Gde-E-250), quality-A, etc., complete for fixing roof sheets/claddings and other similar works as per requirement, complete all as specified and directed. |
| 88 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 89 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 90 | Dismantling wall, ceiling and floor boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, GI grid/ wooden frame work, complete all as specified and directed. |
| 91 | M&L for solid PVC wall/ ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including necessary beading work of same board for joint sealed, complete all as specified and directed. |
| 92 | S&F 4 mm thick Veneered decorative teak plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws/adhesive solution to plywood/flush door shutter and polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer including all sanding and surface preparation to achieve a smooth and uniform finish as in wall paneling complete all as specified and directed. |
| 93 | S&F 9 mm thick plywood grade BWR, type-BB, fixed with screws to timber frame as in wall paneling complete all as specified and directed. |
| 94 | M&L for 2nd class hardwood Plain fillets of sectional area 13 Sqcm to 25 Sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed. |
| 95 | Taking down carefully copper/aluminium point wiring light, light fittings, socket or power socket complete with switches, ceiling roses, pendants regulators, sockets etc.removing material to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | Taking down carefully copper/aluminium point wiring light, light fittings, socket or power socket complete with switches, ceiling roses, pendants regulators, sockets etc.removing material to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender