Tender For Special Repair To Bldg No P-394 Of Abod At A A Banar Under Ge Banar
Tender Value
13.45 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
26450
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-394 Of Abod At A A Banar Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 2 | M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L for two coats of oil bound distemper on newly plastered walls including a one coat of 1mm thick wall care putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified. |
| 4 | M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper including a one coat of 1mm thick wall care putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified. |
| 5 | M&L for 10 mm thick rendering in CM 1:3 on concrete surface/stone patti surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified. |
| 6 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified. |
| 7 | M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified. |
| 8 | Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified.Note:- WPC shall be measured and paid separately. |
| 9 | M&L for prepration of newly plastered surface of walls and applying two coats of acrylic smooth exterior paint of required shade: New work (two or more coat applied @ 1.67ltr/10sqm over and including primimg coat of exterior primer applied @ 2.20kg/10sqm complete all as specified. |
| 10 | M&L for complete removal of existing treatment and preparation of old plastered/pointed surfaceof walls and applying two coats of acrylic smooth exterior paint of required shade: New work (two or more coat applied @ 1.67ltr/10sqm over and including primimg coat of exterior primer applied @ 2.20kg/10sqm complete all as specified and directed. |
| 11 | Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified. |
| 12 | M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified. |
| 13 | Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 14 | M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified. |
| 15 | All item as per Ser No 14.00 above but except stone. |
| 16 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified. |
| 17 | Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing) and rubbish off the premises complete all as specified. |
| 18 | M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified. |
| 19 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified. |
| 20 | M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor complete all as specified. |
| 21 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 22 | All as per item No 22 above but as in skirting over and incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 23 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 24 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified. |
| 25 | M&L 20mm thick red shade marble (table rubbed and polished ) in steps, jambs, pillars,windows cills, cooking platforms and like including moulding (u type) on edges in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 26 | Taking down chowkats or frames with shutters (w/o taking off shutters) not exc 1.5 Sqm each complete all as specified. |
| 27 | Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified. |
| 28 | S&F factory made steel windows box type using ERW hollow P section including box type hinge with steel handle, tower bolt ,peg stay and hold fast complete with glazing bars dovetailed or welded complete with or without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified. |
| 29 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified. |
| 30 | M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified. |
| 31 | M&L solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified. |
| 32 | M&L factory made solid panel of pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'c' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/sealed to the stiles & raols with suitable PVC sheet beading and joined togather with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 33 | M&L for 100mm long, medium weight, Stainless steel butt hinges fixed with doors and chowkats complete all as specified. |
| 34 | S&F Aluminum tower bolts of extruded section of size 150mm complete all as specified. |
| 35 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles all as specified. |
| 36 | S&F powder coated aluminium door shutters, aluminium section weghting 0.55KG/RM including necessary joining cleats, glazing clips, rubber, neoprene packing, handles 2 nos, in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. Note:- Thickness of powder coating shall not be less than 50 micron. |
| 37 | S&F door closer of hydraulically regulated designation No 3universal type, (ISI marked ) suitable for door shutters of 851 to 1000mm in width & 61 to 80 kg weight complete all as specified. (Aluminium Extended section) |
| 38 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20mm complete all as specified. |
| 39 | S&F 20mm outer dia CPVC pipes plain with fittings on walls/celling or laying in floor including necessary fitting complete all as specified. |
| 40 | S&F inrepair 20mm Bore Gun-metal,globe or gate valves with iron wheel head screwed both end for iron pipe and fixed complete all as specified. |
| 41 | S&F in repair 15mm dia stop valves fency type chromium plated screwed down high pressure with crutch of butterfly handle screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified. |
| 42 | S&F in repair CP centre hole mixer swan neck fency type for hot an cold water with check nut and nipple for wash hand basin complete all as specified. |
| 43 | S&F in repair CP15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 44 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified. |
| 45 | S&F in repair 10 ltr PVC valve less symphonic action type dual type flusing, low leve, white, with inlet ball valve, float and handle including 600mm long PVC connection and bracket complete all as specified. |
| 46 | S&F in repair Vitreous china wash hand basin (550x400mm) white, flat back excluding taps, including brackests and 32mm waste cuppling chromium plated complete all as specified. |
| 47 | S&F in repair vitreous china wash down water closet pan (pedestal pattern ) white complete all as specified. |
| 48 | S&F in repair for votreous china bowl urinal flat back size of 465x355x265mm white (miminum) with grating and union for discharge pipe complete all as specified. |
| 49 | Supply and fixing in repair 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 50 | S&F inrepair brass chroumium plated tubular towel rail 20mm dia type 60cm long between flanges complete all as specified. |
| 51 | S&F in repair bath cabinate of PTMT fixed with and including chromium plated brass cdrews and wooden cleats size 355x455mm complete all as specified. |
| 52 | S&F in repair 32mm PVC waste pipe for sink/WHB complete all as specified. |
| 53 | S&F in repair 25mm dia curtain rod, chromium plated with fixing brackets, stops rollers ( two nos of brackets/knobs/corners for one length/each opening) etc complete all as specified. |
| 54 | Dismantiling boarding any description fixed in any position with nails complete all as specified. |
| 55 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified. |
| 56 | S&F 8mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws in celing flat or sloping complete all as specified. |
| 57 | Dismantling of existing water tanks (PVC/RCC/AC) exc 250ltr but n.exc 500ltr capacity and removing from site complete all as specified. |
| 58 | Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including with all accessories complete all as specified. |
| 59 | M&L for PCC 1:3:6 type C2, using 40mm graded stone aggrgates as in platform to PVC water tanks complete all as specified. |
| 60 | Dismantling of 100mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified. |
| 61 | S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 62 | S&F 100mm bore dia cast iron, soil waste and vent pipes ISI marked in any length with or without ears, with cement joints fixed in with cement joint laid in trenches or in floors complete all as specified. |
| 63 | S&F 100mm bore dia cast iron, soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed in walls complete all as specified. |
| 64 | S&F 100mm dia CI Tee branch single (equal or unequal) ordinary or inverted (spigot or socket type of or with paralled branches with oval access door complete all as specified. |
| 65 | S&F in repairs 100mm dia CI bends (any radious) diminishing pieces or tapers (larger bore shall be measured) with oval access door complete all as specified. |
| 66 | S&F 100mm cast iron 'P' or 'S' trap complete all as specified. |
| 67 | S&F 100mm cast iron cowl complete all as specified. |
| 68 | S&F 100mm cast iron sanitary connection socket to fit in WC out-let complete all as specified. |
| 69 | Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified. |
| 70 | M&L cement concrete 1:2:4 mix type B-O (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) all as specified of average thickness 40mm in slope 1:40 over roof complete all as specified. |
| 71 | M&L for 10mm thick plastering in CM(1:3) on concrete roof surfaces with water proofing compound @ 3% by weight of cement and finishing the surface even and fair without using extra cement complete all as specified.Note :- WPC shall be measured and paid separately. |
| 72 | S&F only integral water proofing compound complete all as specified. |
| 73 | M & L painting roof surfaces with one coat of bitumen primer T-10/polymerised grade conforming to IS-3384 @ 0.30kg /Sqm and one coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm, APP membrance laying of 3mm thick and weight not less than 3.50 Kg/Sqm with 10cm side overlap having centre core of 100 micron HMHDPE, outer film is 20 micron each and applying one coat of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm over APP membrane complete all as specified. |
| 74 | M&L for Endura cool roof SRI tiles of size 300x300mm, 10mm thick, laid over and including 15mm thick bedding in CM (1:4), joints grouted and flush pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement. The tiles shall be laid either through authoried applicator who has laid the APP membrane or by the contractor under the supervision of the authorized applicator of APP membrane complete all as specified. |
| 75 | M&L 50 mm thick PCC (1:3:6) type C1 (by using 20mm aggregate) in plinth protection complete all as specified. |
| 76 | M & L Stone Slab 25 mm to 35 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in copings, window cills, chajjas, sunshades, plinth protections etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directd, set, jointed and pointed in cement mortar 1:4 complete all as specified. |
| 77 | Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) and removing from site complete all as specified. |
| 78 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified. |
| 79 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified. |
| 80 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified. |
| 81 | M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified. |
| 82 | M&L for 12mm thick toughned glass as in hinged door, Partitions automatic door and similar work including cutting to shapes, drilling holes required complete all as specified. |
| 83 | M&L for grinding, polishing and rounding off edges of glass any type exc 4 but not exc 12mm thick complete all as specified. |
| 84 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to floor complete all as specified. |
| 85 | S&F Stainless steel polished chromium plated heavy duty 180 Degree hunges for glass door/cupboard/showcase/cabinate glass door hinges size 90mmx115mm fixed to glass by using SS screws complete all as specified. |
| 86 | S&F Stainless steel polished chromium plated heavy duty 'L' Patch connector with pivot suitable for 10-12mm toughened glass complete all as specified. |
| 87 | S&F Stainless steel polished chromium plated heavy duty handle 450mm long suitable for 10-12mm toughened glass complete all as specified. |
| 88 | S&F Stainless steel polished chromium plated double door central lock with key, minimum size 15x10x8cm suitable for 10-12mm toughened glass complete all as specified. |
| 89 | Demolition of reinforced cement in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified. |
| 90 | M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 91 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, verhangs, etc. also splays between floors and beams, etc complete all as specified. |
| 92 | M&L providing cement concrete type B0 (1:2:4) 12.5mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 93 | Taking down old unserviceable point wiring ( light/fan/socket/power) complete, including fixtures andfittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified. |
| 94 | Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified. |
| 95 | Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified. |
| 96 | M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLSH cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits MMS type ISI marked totally concealed in wall/floor/roof including all accessories etc. with sunken boxes suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.(a) One light point controlled by one, One-way switch complete all as specified. |
| 97 | All items as per Ser No 96.00 above but one fan point controlled by one, One-way switch complete all as specified. |
| 98 | All items as per Ser No 96.00 above but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified. |
| 99 | All items as per Ser No 96.00 above but one 5 pin 5Amp Socket outlet point on independent board complete all as specified. |
| 100 | All as per item no. 04 above but with 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLSH cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.Note:- Making good of disturbed surfaces will be done by contractor without any claims. |
| 101 | M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLSH cable with continuous copper earth conductor of 6 sqmm in and including PVC conduit MMS type incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.) |
| 102 | S & F piano flush type switch 5 Amps single pole one way complete all as specified. |
| 103 | S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps complete all as specified. |
| 104 | S & F Switch socket combination 3 pin 16 Amp flush type complete all as specified. |
| 105 | S&F ceiling rose surface type three terminals complete all as specified. |
| 106 | S & F LED lights fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 107 | S & F LED lights fitting 2 feet, 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 108 | S & F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including GI light grade Pipe bracket complete all as specified. |
| 109 | S&F MCB TPN DB 4 way, double door, with 200 amp rated busbar 415 V complete all as specified. |
| 110 | S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V complete all as specified. |
| 111 | S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified. |
| 112 | S & F for MCB Double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified. |
| 113 | S & F for MCB Double pole of rated capacity 40/63 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified. |
| 114 | S & F for MCB Four pole of rated capacity 63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified. |
| 115 | M & L for cutting/making of hole suitable size for 300mm exhaust fan in the stone masonary/brick wall and making good the surfaces by plastring of cement mortar and finish surface with existing wall complete all as specified. |
| 116 | Supply and Fixing in replacement Steel/metal body exhaust fan 300 mm sweep (1400RPM) with blades and frame including louvers grounting with nut bolts complete all as specified. Note- Old unsv Exhaust Fan deposite in E&M yard. |
| 117 | Takingdown old unsv ceiling fan & Supply and fixing New ceiling fans complete with blades, down rods, electronic stepped fan regulator flush type and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Note- Old unsv ceiling fan deposite in E&M yard. |
| 118 | M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work of soft/loose soil and testing on completion etc complete all as specified. |
| 119 | Supply laying and testing in replacemenet of LT XLPE cable,insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with multistanded allumiuium conductor of size 16 sqmm 4 core complete all as specified. |
| 120 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil complete all as specified. |
| 121 | Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm complete all as specified. |
| 122 | Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point complete all as specified. |
| 123 | Material and labour for sand cushioning for under ground cable with locaally available sand for protection of cable 8 cm under the cable and 15 cm over the cable including and spreading and consolidations complete all as specified.Note :- For the purpose of payment only punned thickness will be measured complete all as specified. |
| 124 | Supply and laying un reinforced precast concrete cable cove class LV type 1 flat size 250mmx150mmx40mm laid perpendicular to cable length in trench after sand cushioning to cable complete all as specified. |
| 125 | Supply and fixing in replacement of GI Pipe Light grade 40 mm dia with all necessory accessories/fittings laid in trenches/floor complete all as specified. |
| 126 | M&L for cutting the road/hard standings/wall/floor and excavating in trenches not exceding 0.40 mtr wide and not exc 0.80 mtr deep across the road for laying cable including making good the excavated portion by means of PCC 1:2:4, Type B1 using 20 mm graded stone aggregate complete and matching with the surroundings complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender