Tender For Comprehensive Misc Repairs To Md Accn (Rwa) In A A Nagtalao Under Ge Banar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
11 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Misc Repairs To Md Accn (Rwa) In A A Nagtalao Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning and removing all scale and dirt, etc, from tanks exc 250 but n exc 500 liter cacpacity and from mouths of circulating pipes, etc |
| 2 | Cleaning and removing all scale and dirt, etc, from tanks exc 500 but n exc 1000 liter cacpacity and from mouths of circulating pipes, etc |
| 3 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all asspecified and directed. |
| 4 | S&F in repair Bib taps for 15mm bore dia pipe, cast copper alloy cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 5 | M & L in repair 15 mm stop valve (concealed cromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions and fixed complete all as specified. |
| 6 | M & L in repair 20 mm gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for unions complete all as specified. |
| 7 | S &F in repairs 15mm bore stop/angle valve of copper alloy, CP with flange complete all as specified. |
| 8 | S &F in repairs Pillar taps(long nose), cast copper alloy chromium plated 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified & directed |
| 9 | S &F in repairs Central hole basin mixture cast copper alloy chromium plated fancy type 15 mm bore all as specified & directed. |
| 10 | S &F in repairs Mixing valve (wall Mixer) 3 in 1 with flexible tube & hand shower complete chromium plated fancy type 15 mm bore all as specified & directed |
| 11 | S &F in repairs PVC connection 15 mm bore of length 450 mm all as specified & directed |
| 12 | S &F in repairs PVC connection 15 mm bore of length 600 mm all as specified & directed |
| 13 | S&F in repair PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr |
| 14 | S &F in repairs PVC flushing cistern 10 Ltr Capacity including Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified. |
| 15 | S &F in repairs CP waste coupling 40 mm size with rubber gasket etc for SS sink complete all as specifeied |
| 16 | S &F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specifeied |
| 17 | S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union. |
| 18 | S&F in repair stainless steel shop dish as specified and directed complete. |
| 19 | S &F in repair PTMT body Ball cock /Float Valve 15 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified . |
| 20 | S &F in repair PTMT body Ball cock /Float Valve 20 mm bore with epoxy coated Aluminum rod & HDPE Ball complete all as specified . |
| 21 | S &F in repair HDPE flush pipe 32 mm dia of flush cistern to WC complete all as specified. |
| 22 | S &F in repair GI Nipple 20 mm bore 75mm long for tank connection complete all as specified. |
| 23 | S&F in repair GI Nipple 25 mm bore 75mm long for tank connection complete all as specified. |
| 24 | S&F in repair health faucet (cast copper alloy cromium plated) with 1200 mm long flexible tube with wall hook complete all as specified and as directed and approved by Engineer- in-charge. |
| 25 | S &F in repairs mild steel Cromium Plated hygeine wash Jet spray assembly with 1200 mm long flexible tube complete all as specified. |
| 26 | S &F in repairs 15 mm bore angle cock, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule |
| 27 | S &F in repairs 15 mm bore bib taps, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule |
| 28 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass 5.5 mm thick, mounted on 6mm thick AC/PVC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 29 | S &F in repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as per sample complete all as specified. |
| 30 | S &F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 31 | S &F in repair 125mm dia CP Grating with or without hole (for waste Pipe) complete all as specified. |
| 32 | S &F in repair Vitreous China wash hand basin size 550x400 mm size with pedestal with a pair of brackets, waste pipe, waste coupling complete all as specified. |
| 33 | S &F in repair Vitreous China wash hand basin size 550x400 mm size with a pair of brackets, waste pipe, waste coupling complete all as specified. |
| 34 | S &F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests complete all as specified. |
| 35 | S &F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified. |
| 36 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 37 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 38 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 39 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 40 | S &F 15 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 41 | S&F 20 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 42 | S&F 25 mm bore GI tubing medium grade including all connected fittings as elbow., socket , nipple etc complete all as specified. |
| 43 | Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 44 | Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 45 | Refixing 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 46 | Supply for Pipe Supporting Clamping - Single Pipe of dia 25 mm (1\\") down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Mono Bracket for 25 mm (1\\") pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 25 mm (1\\") pipe, Wall distance 75 mm (3\\") - 1 Nos. 2. U Bolt Rubber Sleeve mounted for 25 mm (1\\") GI /UPVC / CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System . REF DRG NO. CEJZ/TD/102. Make : Shaivi or equivalent as approved by GE. |
| 47 | Supply for Pipe Supporting Clamping - Single Pipe of dia 20 mm (3/4\\") down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4\\") pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 20 mm (3/4\\") pipe, Wall distance 75 mm (3\\") - 1 Nos. 2. U Bol Rubber Sleeve mounted for 20 mm (3/4\\") GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System . REF DRG NO. CEJZ/TD/102. Make : Shaivi or equivalent as approved by GE. |
| 48 | Four 20 mm Water supply Pipes Gi Or UpvcSupply for Toilet Duct Pipelines for Overhead Tank Riser & Domestic Water Pipes downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt RM System-1. Overhead Tank Riser Domestic Water Supply Down take lines 3/4\\" GI-4 nos. from Terrace to 1st Floor/2nd floor Vertical Fixed line with wall distance 4\\": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 4\\" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted \\"C\\" Channel B3 Type to be used of size 18\\" (Continuous Slotted \\"C\\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 4\\"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 18\\"-1 No; 3. U Bolt R/M for 3/4\\" GI pipe Dia. -4 nos. 4. Justi Khilla Gl coated 2 1/2\\"-4 nos. Fixing details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System . REF DRG NO. CEJZ/TD/102. Make: Shaivi or equivalent as approved by GE. |
| 49 | Four SWR(PVC) 25mm Terrace Floor PipesSupply for Pipe Supporting Clamping - Water supply pipes - 4 no. of dia 25 mm (1\\") CPVC/GI pipeline running on terrace floor fixing done with Pipe Support Clamping System consists of Terrace Floor Clamp + U Bolt Rubber Sleeve mounted system running horizontally above floor level 100 mm (4\\"): Pipe Support Clamping made of: 1. Terrace Floor Clamp - 15\\" Width x 4\\" Height made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. Rubber pad made Nitrile Butadiende Rubber (NBR); Dimension : Base - 54 mm x 54 mm; tapered above to 44 mm x 44 mm and height - 25 mm; inserted with SS304 Hex Flange nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. The clamp and rubber pad are combined together using SS304 Hex Flange Bolt with serration 5/16 x 3/4 (A/F 13 mm) as per DIN 6921. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Terrace Floor Clamp - 15\\" Width x 4\\" Height - 1 Nos. 2. U Bolt Rubber Sleeve mounted for 25 mm (1\\") CPVC pipe Dia. - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jodhpur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System . REF DRG NO. CEJZ/TD/102. Make : Shaivi or equivalent as approved by GE |
| 50 | S &F in repair sink cock , cast copper alloy cromium plated for 15 mm bore pipe complete all as specified. |
| 51 | Attending complaints of leaking/unsrevicable ,low level flushing cistern, PVC or chinaware for making it fully functional and leak proof by replacement the defective parts such as rubber washers , PVC levers,PVC/CP knobs if required complete all as directed and specified. |
| 52 | Attemding complaints of internal water supply pipes, fittings and bottle traps for removing of blockages etc of any description incl removing & cleaning of air locks etc. by pressure pump or any other means incl taking down and refixing of pipes & fitting and replacing old unserviciable pipes and fitting with new ones in any dia of pipe complete all as specified and as directed. This item includes minor repair items as change of GI socket, elbow or T etc as reqd all as specified & directed at site . Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. |
| 53 | Attending complaints of leaking/unservicable and petty repair to leaking bib taps , pillar taps, stop cock , angle valve ,wall mixture,WHB mixture,bib taps,two way bib taps, , etc of any description incl change of Rubber washer /Jumper sheet etc complete ( all items as washers , spindles , Rubber washer /Jumper sheet etc are included and would not be paid seprately.) |
| 54 | S & F repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr incl taking out old PVC/RCC tank & removal away from site |
| 55 | All as above but cap 1000 ltrs |
| 56 | S&F in repair Tank cover for 500 liter /1000 liter water storage tank complete all as specified and directed by Engineer-In-Charge. |
| 57 | S&F in repair vitreous china wash down water closet (Pedestal pattern EWC) one piece, coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified. |
| 58 | S&F in repair vitreous china wash down water closet EWC, floor mounted coupled with closet, including connection to drain (or outgoing pipe), including WC seat cover closed pattern with flat bottom and necessary fittings complete all as specified. |
| 59 | Dismantling of cast iron drain pipes, jointed in cementmortar and taking out of trenches & walls , if required 75/100 mm bore |
| 60 | S & F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall, securing with clamp including all fitting etc tee, socket, bend complete all as specified and directed. |
| 61 | S & F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, laid in trenches/ floor or in fixed in wall, securing with clamp including all fitting etc tee, socket, bend complete all as specified and directed. |
| 62 | S&F in repair PVC SWR bends of 110 mm bore complete all as specified |
| 63 | S&F in repair PVC SWR bends of 75 mm bore complete all as specified |
| 64 | S&F in repair PVC SWR tee of 110 mm bore complete all as specified |
| 65 | S&F in repair PVC SWR tee of 75 mm bore complete all as specified |
| 66 | M&L in repair PVC (SWR) floor trap 75 mm bore , plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) |
| 67 | S&F in repair for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia roundiron stays, including bolts and nuts and securing ends of stays to wall or roof for 110/ 75 mm bore pipe |
| 68 | Taking down cement plaster from stone masonry walls etc & M&L for 15 mm thick rendering in CM 1:6 finished even & smooth complete all as specified |
| 69 | Taking down cement plaster from RCC chajja fascia, ceiling etc & M&L for 10 mm thick rendering in CM 1:4 finished even & smooth complete all as specified. |
| 70 | Taking down cement plaster from stone masonry walls etc & M&L for 15 mm thick rendering in CM 1:4 finished even & smooth complete all as specified |
| 71 | M/L two coat of OBD on newly plastered/ unplastered surfaces on wall including preparation of surfaces and 1mm wall care putty complete all as specified. |
| 72 | M&L preperartion of newly plastered surfaces and applying three coat of white wash on RCC chajja/ facia, ceiling etc complete all as specified and directed. |
| 73 | Preparation of new plastered/unplastered surfaces of wall & Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified. |
| 74 | Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 75 | M&L for coloured glazed ceramic tiles 300mmx450mmx6mmthick as per IS 13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) all as specified and as directed. |
| 76 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land. |
| 77 | M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes/sub base for sunken floor etc complete all as specified and as directed. |
| 78 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover floor and including 15mm thick screed bed in CM (1:6) all as specified and as directed by Engr -in-charge. |
| 79 | M&L for Virified Ceramic double charged tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) all as specified and as directed by Engr -in-charge. |
| 80 | All as item no. above but as in skirting including 10mm thick backing coat on stone masonry surfacs in CM 1:4 complete all as specified |
| 81 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 82 | M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 83 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 84 | M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified |
| 85 | M&L 75 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic all as specified. |
| 86 | M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified. |
| 87 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified |
| 88 | M&L for Chequered cement concrete tiles (rubberised finish) 30cm x 30cm x 25mm thick over and including 20mm thick screed bed in CM 1:6 complete all as specified. |
| 89 | M&L for Parking tiles 30cm x 30cm x 9-10mm thick over and including 20mm thick screed bed in CM 1:6 complete all as specified. |
| 90 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified |
| 91 | Supply only integral water proofing compound (ISI marked). |
| 92 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,levelling course, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete |
| 93 | Demolition of stone masonry /block walling built in cement mortar complete all as specified. |
| 94 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified. |
| 95 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified |
| 96 | M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:6 cement mortar, complete, in walls complete all as specified |
| 97 | M&L for Pre-cast cement concrete block masonry with solid blocks, type B1 1:2:4 (20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified. |
| 98 | S&F as in repair stainless steel plate rack of size 30\\"x24\\"x10\\" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample . |
| 99 | S&F in repair Decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete and incl brackets and Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for holding & end cover complete all as specified and as directed |
| 100 | S&F in repair PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers complete all as specified. |
| 101 | Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5 sqm but not exc. 4 Sqm each complete. |
| 102 | Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each complete. |
| 103 | Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 104 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 105 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 106 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified |
| 107 | S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,Both face is covered with decorative face veneer with lipping/frame to match |
| 108 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified |
| 109 | Framed work such as grills, gratings, cooler stand etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 110 | S & F galvanised MS wire cloth 0.56 mm nominal dia of wire & 1.18 mm average width of apperture fixed complete all as directed & specified. |
| 111 | S&F in repair galvanised mild steel wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete all as specified |
| 112 | S & F in repairs 18 mm thick prelaminated particle board exterior grade with decorative choice laminations on one side & the other balancing white complete all as specified & directed. |
| 113 | M&L for Bands, straps, supports or stays; hold fasts; wall ties; hooks for hanging fans; similar small articles conforming to Fe -290 Gde E-165 complete all as specified. |
| 114 | S&F 100mm size SS butt hinges (ISI Marked) complete all as specified. |
| 115 | S&F 300mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on tapple plate and fixed complete all as specified. |
| 116 | S&F in repair 150 mm size best quality Floor door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe complete all as specified. |
| 117 | M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 118 | Supply and fixing in repair Aluminium Anodised extruded section ISI Marked tower bolt of size 200 mm complete all as specified. |
| 119 | Supply and fixing in repair Anodised aluminium extruded section ISI marked door handles size 150 mm complete all as specified. |
| 120 | S& F in repair MS sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a mini of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified. |
| 121 | S & F in repair mild steel 300mm ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified. |
| 122 | Supply and fixing in repair Mild Steel Butt hinges medium weight cold rolled 100mm size complete all as specified. |
| 123 | S&F in repair Stainless Steel medium weight 100mm size Butt hinges complete all as specified. |
| 124 | S&F in repair Mild steel body single action door spring hinge size 100 mm complete all as specified. |
| 125 | S & F in repair 40mm dia cupboard knobs fixed the screw and washer of MS bright finished complete all as specified. |
| 126 | S & F in repair Mild steel body peg stays 250 mm long (minimum) to steel windows & vents complete all as specified. |
| 127 | S & F in repair Mild steel body window handles (Left or right) any size to steel windows & vents complete all as specified. |
| 128 | S & F in repair Door seal as per trade pattern with powder coated aluminium strip 25-30 mm width length having suitable dia holes (for fixing screws) & synthetic strip at bottom to avoid entry of dust etc fixed complete all as specified. |
| 129 | Hacking out old broken glass any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified. |
| 130 | S & F 3mm thick Plain sheet glass panes cut to size required n exc 0.50 sqm each complete all as specified. |
| 131 | S & F 4mm thick figured glass pin headed type n exc 0.50 sqm each complete all as specified & directed. |
| 132 | Supply & fix continuous paino hinges 40 mm width of flap mild steel body electro galvanised finish all as directed & specified. |
| 133 | Resucuring /easing and adjusting shutters without taking down of any description and in any position area exc 1 sqm but n exc 2 sqm complete all as specified. |
| 134 | Resucuring /easing and adjusting to steel windows / vents incl necessary welding rivetting etc complete all as specified. |
| 135 | Resucuring /easing and adjusting shutters without taking down of any description and in any position area n exc 1 sqm complete all as specified. |
| 136 | S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. |
| 137 | repair to joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repair such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repair material like screws/nails, plug etc. to make it functional complete all as specified. |
| 138 | Supply and fixing mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified.Note :- The measurement shall be taken of front elevation and not girthwise. |
| 139 | Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified.Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation. |
| 140 | Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density manufactured by an ISO 9000 certified company using for shutter celluca ply 18 mm thick cut in desired size of shutter and fixed with frame of kitchen accesory/cubboard at all four edges of shutter using 13/6 size self tapping steel screws. below cooking platform The thickness of the shutter is edfe painted by matching colour of PVC ink of plain colour of PVC sheet using complete all as specified and directed by Engineer-in-Charge. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation. |
| 141 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 142 | S&F Brass magic eye for door shutter etc. complete all as specified. |
| 143 | Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified. |
| 144 | M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified. |
| 145 | M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface complete all as specified. |
| 146 | M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified. |
| 147 | M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified. |
| 148 | M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement complete all as specified. |
| 149 | M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified. |
| 150 | Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified. |
| 151 | M&L Cement concrete in foundations, filling and mass-concrete Type B2 1:2:4 (20 mm graded aggregate) complete all as specified and directed |
| 152 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-In-Charge |
| 153 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified. |
| 154 | Dismantling of plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 155 | S&F Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified (Make: JSW & equavalent) complete all as specified. |
| 156 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified. |
| 157 | M & L cement concrete 1:5:10 using 40mm graded aggregate as in mass concrete or as in sunken floor complete all as specified and directed. |
| 158 | M & L treatment for sunken portion for Bathroom and WC would be as per following stages (a) 10mm thick cement plaster in cement mortar 1:3 mixed with liquid WPC @ 200ml per bag of cement when concrete surface is green. (b) After dry of plaster surface applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm (c) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (d) APP modified polmeric membrane centre core of 20 micron HMHDPE outer film 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (e) Blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm complete all as specified and directed (Note : WPC shall be measured and paid in supply only item) |
| 159 | M & L 32 mm dia CPVC pipe as in spout pipe medium grade 32mm bore including of required shape all as specified and directed. |
| 160 | M&L for removing peepul trees or any type of trees/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc, and applying suitable chemical to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 all as directed. Note : Safety precautions like rope, safety belts, helmets , ladder etc shall be responsibility of contractor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 days