Tender For Special Repairs To Bldg P-103 At Hqtc(U)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
87380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg P-103 At Hqtc(U)- 2 Taking Down Of Chowkats Or Frames Not Exc 1.5 Sqm Each With Shutters (Without Taking Off Shutters From The Frames) And Removing To Or From Store As Specified And Directed. 3 Taking Down Of Chowkats Or Frames Exc 1.5 Sqm But N. Exc 4 Sqm Each (Without Taking Off Shutters From The Frames) And Removing To Or From Store As Specified And Directed. 4 S&F Factory Made Upvc White/Colour Casement (Openable) Door Made Of Extruded Profile Wilh Wall Thickness Of 2.3Mm ( + -0.2Mm). Window Profile With Hollow Section With Mitlti Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 78Mm). T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm). Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Ol Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 + -0.2Mm Thick Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27Mm), T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall Wilh 8Mm X 100Mm Long Fasteners. Hardware: [Casement Door Handle Made Of Zinc Alloyed (White Powder Coated). Corner Striker, Secondary Strikers, Cylinder, Door Transmission Gear Made Of Mild Sleel With Multi Point Locking System With Strikes. 3D Hinges Of Zinc Alloyed (White Powder Coated) [And 5Mm Thick Glazing With Selected Quality Glass Complete All As Specified And Directed (Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.). 5 S&F Factory Made Upvc White/Colour Sliding Window Two Track Made Of Extruded Profiles With Wall Thickness Of 2.3Mm (+ -0.2Mm). Window Profile With Hollow Section With Multi Chamber Frame (108Mm X 52Mm), Sliding Sash (42Mm X 67Mm). Sliding Mesh Sash (42Mm X 57Mm) Sliding Interlock (One Vertical Length In Each Shutters) (45.5Mm X 28Mm), Glazing Bead (24.5Mm X 16Mm) Will Be Miterd Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket, 1.2+ -0.2Mm Thick Galvanised Steel Frame (30Mm X 18Mm) 2 Nos, Sliding Sash (30Mm X 18Mm), Sliding Mesh Sash (26Mm X 10Mm) Profile To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8Mm X 100Mm Long Fasteners, Hardware [Touch Lock Of Zinc Alloyed (White Powder Coated), Steel Roller System. Stainless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And 5Mm Thick Glazing With Selected Quality Glass And As Required Accessories Area Not Exceeding 2.00 Sqm Each Complete All As Specified And Directed . (Note: The Unit Rate Quoted By Contractor Encludes Cost Of Glass,Mesh And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose).
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : SPL REPAIRS TO BLDG P-103 AT HQTC(U) CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and Removing to or from Store as specified and directed. |
| 3 | Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and Removing to or from Store as specified and directed. |
| 4 | S&F factory made UPVC White/colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and directed (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.). |
| 5 | S&F factory made UPVC white/colour Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber Frame (108mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick glazing with selected quality glass and as required accessories area not exceeding 2.00 sqm each complete all as specified and directed . (Note: The unit rate quoted by contractor encludes cost of glass,mesh and includes all other connected accessories. Net Opening will be measured for payment purpose). |
| 6 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 7 | S & F in 4.8 mm thick sheet glass ordinary glass and glazing fixed with UPVC Frame at door and window in squares exceeding 0.50 sqm in each pane all complete all as specified and directed. |
| 8 | M & L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting, grinding and polishing of tiles over 20 mm thick screed bed of cement morter (1:6) complete all as specified and directed |
| 9 | M & L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in vertical surfaces including cutting, grinding and polishing of tiles over backing coat of 10 mm thick rendering of cement morter (1:4) complete all as specified and directed. |
| 10 | M&l for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and directed. |
| 14 | M&L for coloured Vitrified tiles 8 to 10 mm thick (square/ rectangular) area of each tile size 600mm x 600mm , in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed. |
| 15 | M & L for coloured Vitrified tiles 8 to 10 mm thick (square/ rectangular) area of each tile size 600mm x 600mm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and directed. |
| 16 | S&F anodised aluminium frame powder coated, for doors, windows, ventilators, Partition/fixed type windows, aluminium grill etc. with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 17 | M &L for fixing partly glazed partition of height from floor with 12mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board of approved shade and manufacturer and glazed portion as per direction the Engr-in Charge and middle portion with 8 mm thick tinted glass in aluminium frame work consisting of rectangular anodized aluminium sections of natural plain colour of size approx.62.5x37.10x2mm ,glazing clip section no 4660 of Jindal / Hindalco etc complete all as specified and directed. Note:-Aluminium Partition shall be fixed at site in different stages as per the following:- (a) From bottom upto 1.2 mtr height 12mm thick interior grade phenol formaldehyde bonded as per IS 3087 melamine faced both sides prelaminated particle board/ MDF board will be fixed. (b) From Top of board up to 1.00mtr height 8 mm thick tinted will be provided. (c ) Remaining portion above glass up to ceiling height again board 12mm thick interior grade phenol formaldehyde bonded as per IS 3087 melamine faced both sides prelaminated particle board/ MDF board will be fixed with aluminium frame complete. |
| 18 | S & F for Brass Godrej Mortice lock, vertical type, size 100 mm 4 levers include for escutcheon plates and two keys complete all as specified and directed. |
| 19 | S & F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed. |
| 20 | S & F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 21 | S&F 150mm Aluminium handles, cast type anodised.complete all as specified and as directed complete all as specified and directed. |
| 22 | S&F in repairs SS curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified. |
| 23 | S&F in repairs 25mm dia stainless steel, fancy type curtain rod complete all as specified. |
| 24 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance as directed by the Engineer in Charge. |
| 25 | Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of defence area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination. |
| 26 | M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete in walls all as specified and directed. |
| 27 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and direction by Engr in Charge. |
| 28 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by Engr in Charge (WPC shall be measured & paid separately). . |
| 29 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement. all as specified and direction by Engr in Charge. |
| 30 | M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement all as specified and direction by Engr in Charge. |
| 31 | Supply only liquid water proofing compound of approved quality. (Make : CICCO NO.1/SIKA/ACCO PROOF). |
| 32 | M&L for preparing new plastered surfaces of walls and applying Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness plaster of paris putty to prepare the surface even and smooth as specified and directed. |
| 33 | M&L for preparing old plastered surfaces of ceiling and applying Two coat of white wash on surfaces of ceilings complete all as specified and directed. |
| 34 | M&L for preparing old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed. |
| 35 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth as specified and directed. |
| 36 | M&L 20-22 mm thick machine cut pre-polished Sadarahalli stone slab flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over & including 15mm thick screed or bedding in cement mortar 1:6, including grinding, rubbing and polishing complete all as specified and directed. |
| 37 | M&L 20-22 mm thick machine cut pre-polished Sadarahalli stone slab as in skirting, riser of steps in full length in single piece without joint with groove cutting in double line of stair width, bullnosed ends, laid over and including 10mm thick screed or bedding in cement mortar 1:4 fixed with grey cement slurry, complete all as specified and directed. |
| 38 | Dismantling structural steel work including doors, gates ,steel window and similar works but excluding framed truss etc.complete all as specified and directed. |
| 39 | M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height all as specified and direction by Engr in Charge.complete all as specified and directed. |
| 40 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 41 | Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed |
| 42 | M&L for point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Caping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / rawl plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls /ceilings /floors etc and including modular sunken boxes boxes for mounting of switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly, colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for the following :- |
| 43 | One light point controlled by one single pole 5 Amps switch. |
| 44 | One ceiling fan/wall point controlled by one single pole 5 Amps switch. |
| 45 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 46 | One 5 pin socket point 5 Amps on independent board. |
| 47 | One 5 pin socket point 5 Amps on same board with other switches. |
| 48 | All as per item No-2 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified & directed . |
| 49 | S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified & directed . |
| 50 | S&F modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified & directed . |
| 51 | S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified & directed . |
| 52 | S&F modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified & directed . |
| 53 | S&F of modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed . |
| 54 | Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed . |
| 55 | Supply and fixing of modular white cover plate with frame, 3 module complete all as specified & directed |
| 56 | Supply and fixing of modular white cover plate with frame, 6 module complete all as specified & directed |
| 57 | Supply and fixing of modular white cover plate with frame, 8 module complete all as specified & directed |
| 58 | Supply and fixing of modular metal flush box 3 module complete all as specified & directed |
| 59 | Supply and fixing of modular metal flush box 6 module complete all as specified & directed |
| 60 | Supply and fixing of modular metal flush box 8 module complete all as specified & directed |
| 61 | Supply and fixing LED Light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified & directed . |
| 62 | Supply and fixing LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified & directed . |
| 63 | Supply and fixing LED light fitting of size 600 mm x 600 mm, 36 watt, white/warm white as per site requirement 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of size 1.5 sqmm complete all as specified & directed . |
| 64 | Supply & fixing Sheet metal enclosure for DB's double door SPN,12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed . |
| 65 | Supply and fixing testing and commissioning MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed . |
| 66 | Supply and fixing testing and commissioning MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed . |
| 67 | Supply and fixin of Sheet metal enclosure for DB's double door VTPN 04 ways including 01 No MCCB 125 Amp 4 pole 16 KA to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed . |
| 68 | Supply and fixing Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick/stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. |
| 69 | Supply and fixing BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and remote to control all the function of fan complete all as specified & directed . |
| 70 | M&L for sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Caping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed . Note-Two run of 2.5 sqmm single core cable and one run2.5 sqmm earth wire including PVC casing & capping together will be measured as one unit. |
| 71 | M&L for sub main wiring with two single core 4sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Caping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed . Note-Two run of 4 sqmm single core cable and one run 4 sqmm earth wire including PVC casing & capping together will be measured as one unit. |
| 72 | M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed . Notes: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includesgalvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the Govt till desired result is obtained (iv) After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge / JE E/M and proper record shall be maintained duly signed by all concerned. (v) Earth resistance tester will be provided by the contractor. It should be caliberated from authorised company/ lab. |
| 73 | Supply & fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed . |
| 74 | Taking down carefully copper/aluminium point wiring and sub main wiring (light, fan,socket or power) with all accessories including Casing Caping complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc and removing materials to store for keeping in safe custody and refixing the same after B/R work and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 days