Tender For Construction Of Esr And Other Ancilliary Works In Connection With The Work Augmentation Of Water Supply System Alongwith Ancilliary Works For Balangir Town Under Sujala., Balangir-Odisha

TDR : 56140818

Tender Notice
BOQ

18 Days Left

Balangir , Odisha

Tender Brief : Tender For Construction Of Esr And Other Ancilliary Works In Connection With The Work Augmentation Of Water Supply System Alongwith Ancilliary Works For Balangir Town Under Sujala.

Document Fees
₹ 10000 /-

EMD
₹ 1534000.0 /-

Tender Value
₹ 15.34 Crore /-

Submission Date
17-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Construction of ESR Design, Drawing, Construction, Testing & Commisioning of RCC Elevated Service Reservoirs (ESR) and piping arrangement upto 5m. from external face all complete as per the direction of Engineer-in-charge.i) Proposed ESR at Zone -02 ( 500 KL) Staging - 25m
2	Proposed ESR at Zone - 4 & 6 combined( 1350 KL)Staging - 25m
3	Proposed ESR at Zone - 14 (1000 KL) Staging - 30m
4	Proposed ESR at Zone - 21 (1000 KL) Staging - 25m
5	Supplying all materials, labour T&P for fitting and fixing, installation, testing & commissioning of DI Pilot Altitude flow Control valve of DOUBLE CHAMBER (Globe Type) with orifice plate for purpose to close valve at maxium water level of ESR & open to refill the ESR AT LOWER preset water level. Control valve should be worked at minimum pressure 1kg/cm². An altitude control valve control at level of a tank . The opening & closing the valve will work without external power sources (electric,pneumatic or man power ). It will work automatically. The body, Spool & Cover will be DI ASTM A- 536 standard, Spring, steam, Jam nut, Cover bolt, & cover waser shouuld be SS, DI/SS Diaphragm plate Nytrill/Nylon diaphragm, Brozen cover bushing, Seat plate & ring with 2 nos solenoid including cost of all materials with transportion to site /Storage with insurance all as per direction of EIC.i) 200 mm
6	ii) 250mm
7	Supplying all materials, labour T&P for fitting and fixing, installation, testing & commissioning of Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100mm to 1000mm including sensor, transmitter, Surge Protector, cable GI duct if suitable size 25 mm and power supply of Flow meter must be 24V DC. 24V DC SMPS with MCB, Surge Protection device, GSM/ GPRS modem (with Simcard suitable for available telecom network and its charges valid for 36 months) including the pipe cutting, levelling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee, Flow meter data dashboard must be prepared web based applicable which can be accesable from anywhere over internet etc complete, as may be required at site & based on technical specifications etc. complete in all respect as per technical specification and as per direction of Engineer in Charge.i) 300mm
8	ii) 500mm
9	Supplying all materials, labour, T&P for fitting and fixing of of D.I. Mechanical dismentaling joint including cost of rubber gaskets, nut bolts etc. all complete as per specification and direction of Enginer - in - chargei) 300 mm
10	ii) 500mm
11	Construction of Watchman roomSupplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
12	Supplying all materials, labour, T&P forFilling in foundation & plinth with sand watered and rammed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
13	Supplying all materials, labour, T&P for Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
14	Supplying all materials, labour, T&P for R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
15	Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
16	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P). i) Column Base, Column Base up to plinth, Plinth Beam
17	ii) R.C.C. Beams, Column
18	iii) Lintel
19	iv) Floor & Roof Slabs, Landings, Projecting Sun Shades and Chajja
20	Supplying all material, labour, T&P for Brick masonry work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in cement mortar (1:6) in foundation & plinth including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.i) Foundation and Plinth
21	ii) For Superstructure
22	Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
23	Supplying all material, labour, T&P for 16mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
24	Supplying all material, labour, T&P for 2.5cm. A.S.flooring with cement concrete (1:2:4) with punning using 12mm size HGCB chips including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
25	Supplying all labour,material,T &P for fitting & fixing of MS door & window made out of MS angle 50x50x6mm and 40x40x5mm size including fixing of 10 mm thick Square bars with all necessary fittings etc. all complete as per specification and direction of Engineer-in-charge.
26	Supplying all materials, labour T&P and fixing of fabricated M.S door, windows & grill in wall including cutting of brick masonary wall, fixing of door, windows, grill by providing C.C (1:2:4), Plastering to the damaged portion but exculding the cost of M.S work etc.all complete as per specification and direction of Engineer-in-charge.
27	Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, labour cess etc, all complete as per specification and direction of Engineer-in-charge. (for steel work)
28	Supplying all materials, labour, T&P and providing Painting Two coats with Aluminium/Approved paint on Iron work including all materials, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
29	Supplying all materials, labour, T&P and providing Wall painting two coats with plastic emulsion paint over one coat primer of approved shade on new work to give an even shade including all materials, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
30	Supplying all materials, labour, T&P and providing Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor including all materials, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
31	Internal PH work of watchman room toilet.Supplying all material, labour, T&P for Cuting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages etc. all complete as per specification and direction of Engineer-in-charge.
32	Providing and fixing to wall or ceiling and floor UPVC- ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor etc. all complete as per specification and direction of Engineer-in-charge.i) 20 mm diameter ( Sch-80)
33	ii) 25 mm diameter ( Sch-80)
34	Providing and fixing tiles in dados skiring and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including cost of ceramic wall tiles of approved shade etc. all complete as per specification and direction of Engineer-in-charge.
35	Providing and fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost of ceramic floor tiles of approved shade etc. all complete as per specification and direction of Engineer-in-charge.
36	Supplying all materials, labour, T&P for fitting and fixing brass/C.P./PVC fitting and fixtures of the following specification with supply of all jointing materials, C.P. screws, wooden plugs, washers etc. all complete as per specification and direction of Engineer-in-charge.i) 15mm dia PVC angular stop cock
37	ii) 15 mm dia PVCShort body Bib cock
38	iii) 15mmx600mm PVC connection pipe
39	iv) 15 mm dia PVC Long body Bib cock
40	v) C.P.grating
41	vi) 120mm dia CP Over head Shower
42	vii) 15mm dia PVC stop cock
43	viii) C.P.soap holder/disc.
44	ix) 10 litr pvc low level cistern with fittings
45	x) 23\\" I.W.C.(Orissa Pan)
46	Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.8mtr. Deep Leech pit with full wall height of FA brick work in cement mortar (1:6) and cement plaster (1:3) inside for full depth and outside for 0.45 mtr depth, covered by means of 100mm.thick R.C.C. slab with 0.8% TMT rebars including earth work in excavation, 100mm thick sand filling, 100mm thick PCC (1:4:8) and refilling of cavity around the pit etc. all complete as per approved design and drawing and as per direction in Engineer-in-charge.
47	Supplying all materials, labour and T&P for Construction of Inspection Chamber with 100mm thick RCC Slab (0.75x0.75x0.45)m with FA brick work in cement mortar (1:6) and cement plaster (1:3) with punning for inside and outside plaster for 0.45 mtr depth, covered by means of 100mm.thick R.C.C. slab with 0.8% TMT rebars including earth work in excavation, 100mm thick sand filling, 100mm thick PCC (1:4:8) and refilling of cavity around the pit etc. all complete as per approved design and drawing and as per direction in Engineer-in-charge. as per P.H. Specification.
48	Supplying all materials ,Labour,T & P and fixing SWR PVC pipe type B & fitting to wall with nails , clamps and wooden plug as per P.H specification & the direction of Engineer -in-charge.i) 75mm dia SWR PVC Pipe Type-B
49	ii) 110mm dia SWR Pipe Type-B
50	iii) 110mm dia Tee with Door
51	iv) 110 mm dia P.V.C. SWR Vent Cowl
52	Electrification workSupplying all materials, labour, T & P for complete internal electrification in all respect including various components such as fitting & fixing of light point 3 nos (1 Bar- 40 Watt & 2 Bulb 12 Watt),1 out door Led (40W) Street light, 1 Fan celling (swipe size 600mm), 3/5 pin plug point 6A-2Nos. & 16 A-1Nos., 32A MCB and 63 A Main switch as per requirement, Concealed point wiring and submain wiring with 1.5mm² & 2.5mm² copper cable including Earthing cable and proper earthing with G.I. pipe, charcoal, salt etc., alongwith Regulator, piano type modular switch,celing rose, MS box, PVC Conceal wiring duct as per requirement etc all complete as per specification and direction of Engineer-in-charge.
53	Distribution pipe line NetworkSupplying all materials, labour, T & P for Removing and re fixing of precast cement concrete interlocking paving blocks of all sizes over 200mm thick coarse sand bedding (duly compacted) including filling of joints with sand complete in all respect including cost of all lead, royalty as per the direction of Engineer-in-charge.
54	Supplying all materials, labour, T & P for Removing of precast cement concrete interlocking paving blocks of all sizes including stacking of paver blocks all complete as per the direction of Engineer in charge.
55	Supplying all materials, labour, T & P for Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
56	Supplying all materials, labour, T & P for Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
57	Supplying all materials, labour, T & P for Cutting asphalt or bituminous road of flexible pavements and disposal of dismantalled materials upto a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T& P etc. all complete as per the direction of engineer-in-charge.
58	Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
59	Supplying all materials, labour, T & P for Cutting of C.I /DI pipe by eletric arc welding at site including cost of all materials, labour, T & P etc all complete as per direction of the engineer–in–charge.
60	Supplying all materials, labour and T&P and laying in trenches centrifugally Ductile (spun) Iron pressure pipes K-7 / K-9 with cement mortar lining conforming to I.S : 8329 - 2000 of the following nominal diameter including transportation from Departmental store of all materials to site all complete as per specification and direction of the Engineer-in-charge .i) 100 mm dia DI K-7 Pipe
61	ii) 150mm dia D.I. K-7 Pipe
62	iii) 200mm dia D.I. K-7 Pipe
63	iv) 250mm dia D.I. K-7 Pipe
64	v) 300mm dia D.I. K-7 Pipe
65	Supplying, fitting, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 as per specification including const of transportation all complete as per direction of Engineer-in-charge.Cost of Specials. (for 100 to 300 mm dia size)
66	Special laying (Labour only)
67	Providing push-on joints confirmming to IS 3114-1994 to Centrifugally (Spun) CI/DI Pipes using rubber gaskets confirming to IS 5382 of SBR quality including testing of joints as per specification all complete and as per direction of Engineer-in-charge. (Labour only)i) 100mm dia D.I K-7 Pipe
68	ii) 150mm dia D.I K-7 Pipe
69	iii) 200mm dia D.I K-7 Pipe
70	iv) 250mm dia D.I K-7 Pipe
71	v) 300mm dia D.I K-7 Pipe
72	Supplying Providing flanged joints conforming to IS:6392,13159 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification all complete as per direction of Engineer-in-chargei) 100 mm diameter
73	ii) 150 mm diameter
74	iii) 200 mm diameter
75	iv) 250 mm diameter
76	v) 300 mm diameter
77	Supplying all materals, labour and T&P for laying of MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes, Painting charges and fitting to site etc all complete as per the direction of E.I.C.i) 100mm dia M.S.Pipe (4.50mm thick)
78	ii) 100mm dia M.S. Flange.(10mm thick)
79	iii) 100mm dia x 45º MS fabricated offset bend
80	iv) 150mm dia M.S.Pipe (4.50mm thick)
81	v) 150mm dia M.S. Flange.(10mm thick)
82	vi) 150mm dia x 45º MS fabricated offset bend
83	vii) 200mm dia M.S.Pipe (6.30mm thick)
84	viii) 200mm dia M.S. Flange.(12mm thick)
85	ix) 200mm dia x 45º MS fabricated offset bend
86	xiv) 250mm dia M.S.Pipe (6.30mm thick)
87	xv) 250mm dia M.S. Flange.(12mm thick)
88	xvi) 250mm dia x 45º MS fabricated offset bend
89	xvii) 300mm dia M.S.Pipe (7.10mm thick)
90	xviii) 300mm dia M.S. Flange.(12mm thick)
91	xix) 300mm dia x 45º MS fabricated offset bend
92	100 x 100 x 100 mm dia MS AF TEE
93	150 x 150 x 150 mm dia MS AF TEE
94	200 x 200 x 200 mm dia MS AF TEE
95	250 x 250 x 250 mm dia MS AF TEE
96	300 x 300 x 300 mm dia MS AF TEE
97	150 x 100 x 150 mm dia M.S UN EQUAL AF TEE
98	200 x 100 x 200 mm dia M.S UN EQUAL AF TEE
99	200 x 150 x 200 mm dia M.S UN EQUAL AF TEE
100	250 x 150 x 250 mm dia M.S UN EQUAL AF TEE
101	250 x 200 x 250 mm dia M.S UN EQUAL AF TEE
102	300 x 200 x 300 mm dia M.S UN EQUAL AF TEE
103	300 x 150 x 300 mm dia M.S UN EQUAL AF TEE
104	350 x 250 x 350 mm dia M.S UN EQUAL AF TEE
105	150mm x 100mm M.S Reducer
106	200mm x 150mm M.S Reducer
107	Supplying all materials, labour, T & P for Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
108	Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.
109	Supplying all materials, labour and T&P for Making inter-connection of new D.I. pipe line with old C.I./DI pipe line all complete as per specification and direction of Engineer in charge.i) 100mm.dia.
110	ii) 150mm.dia.
111	iii) 200mm.dia.
112	iv) 250mm.dia.
113	v) 300mm.dia.
114	Supplying all materials, labour and T & P for construction of brick masonry valve chamber of following sizes including earth work all kinds of soil, 100 mm thick sand filling in foundation, lean cement concrete (1:4:8) of 150mm thick, Fly ash brick masonry in cement mortar (1:4) of 230mm thick wall in foundation and plinth, 12mm thick cement plaster (1:4) inside. 16mm thick cement plaster (1:6) outside, 100mm thick cover slab in R.C.C. (M20) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top, centring and shuttering and refilling etc. including transportation of all materials to site all complete as per specification and direction of the Engineer-in-charge.i) Construction of Sluice Valve Chamber of size for 3\\" to 6 \\"dia pipe (size 0.90 x 0.90 x 1.10)
115	ii) Construction of Sluice Valve Chamber of size for 7\\" to 10 \\"dia pipe (1.20x1.20x1.30)
116	iii)Construction of Sluice Valve Chamber of size for 12\\" to 14 \\"dia pipe (size 1.50x1.50x1.40)
117	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
118	Supplying all materials, labour, T & P for Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
119	Supplying all materials, labour, T & P for Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
120	Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.
121	Supplying all materials, labour, T & P for Providing and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand including cutting, corbelling, splays whereever necessery to proper size with cost, Conveyance, Royalties and cost of all labour etc. all complete as per specification and direction of the Engineer-in-Charge.
122	Supplying all materials, labour, T&P for Fixing ferrule conforming to IS:2692-1978 of the following nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) etc. all complete as per specification and direction of the Engineer-in-Charge.
123	Supplying all materials, labour, T&P for laying in trenches PVC pipes conforming to ASTM-D-1785/89 (Schedule-80) of the following nominal bore and pipe fittings including testing etc all complete as per specification and direction of the Engineer-in-Charge.i) 20mm Dia
124	ii) 25mm diameter
125	NH/SH Crossing by Microtunnelling (Horizontal Thrust boring/pushing method)Suppying all material, labour, T&P for crossing of M.S. pipe line across Railway line/NH or SH Road by Horizontal Thrust boring/pushing method (in slope of 1 in 40 towards downstream) including encasing the pipe line by different dia including excavation of Push Pit, dewatering if any, laying & jointing of casing & carrier pipe, capping & sealing casing pipe etc for carrier pipe & installation of sign boards on either side etc all complete as per specification and direction of Engineer-in-charge & Railway Department /State Works Department.i) 600mm dia Casing Pipe
126	ii) 400mm dia Casing Pipe
127	Supplying all materials, labour and T&P for Providing M.S pipes of all classes conforming to IS:3589 & IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO: 8501-1 followed by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.i) 610.0 mm Outer dia & 12.5 mm thck MS Pipe
128	ii) 406.4 mm Outer dia & 8.8 mm thck MS Pipe
129	iii) 219.1 mm Outer dia & 6.3 mm thck MS Pipe
130	iv) 323.90 mm Outer dia & 7.10 mm thck MS Pipe
131	Supplying all materials, labour and T&P for Providing & fixing High Density Polythylene spacers between casing & carrier pipe to avoid contact 2.5m c/c all complete as per specification (BS 105;GUIDELINES ON PIPELINE CROSSINGS UNDER RAILWAY TRACK/NH /STATE HIGHWAY) and direction of Engineer In-Charge.
132	Supplying all materials, labour, T&P for fitting fixing of DI Resilient Seated Glandless Sluice Valve of RATING PN - 1.6(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters etc. all complete as per specification and direction of the Engineer-in-Charge. (Make-VAG/AUDCO/KIRLOSKAR/Hawle) Cost of materialsi) 100mm Dia DI Sluice Valve with hand wheel and with out bypass arrangement (PN 1.6)
133	150mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
134	200mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
135	250mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
136	300mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
137	b. Labour charges for fixingi) 100 mm diameter
138	ii) 150 mm diameter
139	iii) 200 mm diameter
140	iv) 250 mm diameter
141	v) 300 mm diameter
142	RCC Framed Boundary Wall with Fly Ash Brick Filler Wall Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
143	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
144	Supplying all materials, labour, T & P for Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
145	Supplying all materials, labour, T & P for R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
146	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all taxes, conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P). I) Column Base, Column Base up to plinth, Plinth Beam
147	ii) Beam (on Wall Top), Column
148	Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
149	Supplying all material, labour, T&P for Brick masonry work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in cement mortar (1:6) in foundation & plinth including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.i) For Foundation and Plinth
150	ii) For Superstructure
151	Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
152	Supplying all materials, labour, T & P for Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
153	Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
154	Supplying all labour, T&P for removing the surplus earth by mechanical means etc all complete as per direction of the Engineer-in-Charge.
155	Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, labour cess etc all complete as per the direction of Engineer-in-charge
156	Construction of RCC Pillar with fixing of fabricated 2 Leaf MS Gate. Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the Engineer–In–Charge.
157	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and rammed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
158	Supplying all materials, labour, T & P for Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
159	Supplying all materials, labour, T & P for R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
160	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P).i) Column Base up to plinth
161	ii) Column
162	Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
163	Supplying all materials, labour, T&P for 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth with closed deep chiping and slury treatment including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
164	Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
165	Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
166	Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, labour cess etc all complete as per the direction of Engineer-in-charge
167	Supplying all materials, labour, T&P for Fitting & Fixing of MS Gate providing 2 Coats of Enamel Paint on 2 Coats of Primer including cost of conveyance, brushes, sundries, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge i) 2 Leaf MS Gate (Size 5.0 M x 1.8 M Ht.)
168	ii) 1 Leaf MS Gate (Size 1.3 M x 1.8 M Ht.)
169	Constuction approach RCC road Supplying all materials, labour, T & P for Construction of granular sub-base by providing close graded Material Grading-VI, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density all complete as per specification and direction of Engineer-in-charge.
170	Supplying all materials, labour, T & P for Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density all complete as per specification and direction of Engineer-in-charge.
171	Supplying all materials, labour, T & P for Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
172	Supplying all materials, labour, T & P for M-20 grade with 20mm & down grade crusher broken hard Granite chips mixed by Concrete Mixure, laying in layers compacting by vibrator with proper cambering and filling bern by excavated earth and all leads and lifts including frame works, etc. complete in all respect as per scope and technical specification given at Section- 8 & 9 of DTCN and direction of Engineer-in-charge. (F&P)
173	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P).
174	Fixing of Paver block at ESR site Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the Engineer–In–Charge.
175	Supplying all materials, labour, T & P for Construction of granular sub-base by providing close graded Material Grading-VI, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density all complete as per specification and direction of Engineer-in-charge.
176	Supplying all materials, labour, T & P for Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoRTH Specifications for Road and Bridge Works (Latest revision) all complete as per specification and direction of Engineer-in-charge.
177	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and rammed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
178	Supplying all materials, labour, T & P for Providing and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand including cutting, corbelling, splays whereever necessery to proper size with cost, Conveyance, Royalties and cost of all labour etc. all complete as per specification and direction of the Engineer-in-Charge.
179	Supplying all materials, labour, T & P for M-20 grade with 20mm & down grade crusher broken hard Granite chips mixed by Concrete Mixure, laying in layers compacting by vibrator with proper cambering and filling bern by excavated earth and all leads and lifts including frame works, etc. complete in all respect as per scope and technical specification given at Section- 8 & 9 of DTCN and direction of Engineer-in-charge. (F&P)
180	Supplying all labour, T&P for removing the surplus earth by mechanical means including loading, transporting, un loading to approved Muncipal Dumping ground or as approved by Engineer-in-Charge beyond 50mtr initial lead for all leads including all lifts involved etc all complete as per direction of the Engineer-in-Charge.
181	Construction of RCC DrainSupplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
182	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and rammed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
183	Supplying all materials, labour, T & P for Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
184	Supplying all materials, labour, T & P for R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
185	Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
186	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all , conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P).
187	Supplying all materials, labour, T & P for Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
188	Providing fitting and fixing of Cow Catcher Supply fitting and fixing of different size MS sections for Cow catcher as per approved design & including fixing of with all necessary fittings etc all complete as per direction of Engineer-in-Charge.
189	Supplying all materials, labour, T & P for Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
190	Supplying all materials, labour, T & P for Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.
191	Construction of Brick masonry drainSupplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the Engineer–In–Charge.
192	Supplying all materials, labour, T & P for Filling in foundation & plinth with sand watered and ramed including cost of sand, labour, royalty, lead all complete as per the direction of Engineer in charge.
193	Supplying all materials, labour, T & P for Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with , cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
194	Supplying all material, labour, T&P for Brick masonry work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in cement mortar (1:4) in foundation & plinth including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
195	Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:6) over brick work including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
196	Supplying all material, labour, T&P for 12mm. Thick cement plaster (1:6) over brick work with cement punning for skirting including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
197	Supplying all materials, labour, T & P for R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials including cost of conveyance, royalty, sundries, watering for curing, supervision charge, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
198	Supplying all materials, labour, T&P for placing TMT bar reinforcement for RCC bar including cutting, bending, binding, tying binding ware 18 to 20 gauge, conveyance all material to work site, labour cess etc. all complete as per specification and direction of Engineer-in-charge.
199	Supplying all materials, labour T&P for providing Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of all , conveyance, labour cess etc. all complete as per specification and direction of Engineer-in-charge. (F&P).
200	Supplying all materials, labour, T & P for Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
201	HOUSE SERVICE CONNECTIONS (from 100mm dia distribution main) Supplying all materials, labour, T & P for Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
202	Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
203	Supplying all materials, labour, T & P for Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
204	Supplying all Labour,T&P and Drilling in 100mm DI pipe,fitting of Ductile Iron Tapping Saddle using suitable bolts,nuts etc with lead of all materials to site as per specification and direction of Engineer in charge
205	Supplying all materials, labour T&P for laying in trenches 20mm dia MDPE Pipe P.N. 16 including fitting ans fixing with required fixtures all complete as per specification and direction of Engineer in charge (make - Plumteck/Griraj or Equivalent)
206	Supplying all materials, labour T&P for fitting, fixing of 10mm to 25mm dia brass ferrule in DI/CI pipe line with cost of ferrule all complete as per specification and direction of Engineer in charge
207	Supplying all materials, labour T&P for fitting, fixing of following fixtures all complete as per specification and direction of Engineer in charge i) 20mm dia MDPE FTA Elbow
208	ii) 20mm dia MDPE FTA
209	iii) 20mm dia MDPE Elbow double Compression
210	iv) 20mm dia MDPE Coupler double Compression
211	v) 20mm dia MTA
212	vi) 20 x 25 mm dia UPVC Reducer FTA
213	Supplying all Labour,T&P and Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages all complete as per specification and direction of Engineer in charge
214	Supplying all material, labour, T&P and fitting & fixing of 15 mm dia PVC bib cock all complete as per specification and direction of Engineer in charge
215	Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge.
216	b) With 150mm dia distribution mainSupplying all materials, labour, T & P for Dismantling of cement concrete pavement road by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and disposal of dismantalled materials upto a lead of 1000 mtr., stacking servicable and unservicable materials including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
217	Supplying all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth, levelling the bed, including sundries, supervision charges & Labour cess etc as per direction of the engineer–in–charge.
218	Supplying all materials, labour, T & P for Filling foundation and plinth with excavated Earth in all kind of soil inluding watering and ramming, cost of all labour, T&P as per direction of Engineer-in-charge.
219	Supplying all Labour,T&P and Drilling in 150mm DI pipe,fitting of Ductile Iron Tapping Saddle using suitable bolts,nuts etc with lead of all materials to site as per specification and direction of Engineer in charge
220	Supplying all materials, labour T&P for laying in trenches 20mm dia MDPE Pipe P.N. 16 including fitting ans fixing with required fixtures all complete as per specification and direction of Engineer in charge (make - Plumteck/Griraj or Equivalent)
221	Supplying all materials, labour T&P for fitting, fixing of 10mm to 25mm dia brass ferrule in DI/CI pipe line with cost of ferrule all complete as per specification and direction of Engineer in charge
222	Supplying all materials, labour T&P for fitting, fixing of following fixtures all complete as per specification and direction of Engineer in charge i) 20mm dia MDPE FTA Elbow
223	ii) 20mm dia MDPE FTA
224	iii) 20mm dia MDPE Elbow double Compression
225	iv) 20mm dia MDPE Coupler double Compression
226	v) 20mm dia MTA
227	vi) 20 x 25 mm dia UPVC Reducer FTA
228	Supplying all Labour,T&P and Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages all complete as per specification and direction of Engineer in charge
229	Supplying all material, labour, T&P and fitting & fixing of 15 mm dia PVC bib cock all complete as per specification and direction of Engineer in charge
230	Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite metal including cost of all labour, materials with all cost of conveyance, royalty, sundries, watering for curing, supervision charge, T & P etc all complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Irrigation Related Work Tenders

Reservoir Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Esr And Other Ancilliary Works In Connection With The Work Augmentation Of Water Supply System Alongwith Ancilliary Works For Balangir Town Under Sujala., Balangir-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Esr And Other Ancilliary Works In Connection With The Work Augmentation Of Water Supply System Alongwith Ancilliary Works For Balangir Town Under Sujala., Balangir-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us