|
| 1 | Supply cost of structural steel and rolled steel materials of Embedded parts consisting of seal beam, guide, track arrangement etc. suitable for vent size of 600mm x 650mm and maximum guide length of about 1600mm for 01 no. of service gate and 01 no. of emergency gate including 5% wastage material complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 2 | Fabrication cost of the above mentioned embedded parts with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables,complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 3 | Supply cost of structural steel and rolled steel materials of vertical gate consisting of skin plate, end vertical girders, horizontal girders, bronze pads, lifting brackets, seal arrangements etc. suitable for vent size of 600mm x 650mm and maximum guide length of about 1600mm for 01 no. of service gate and 01 no. of emergency gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 4 | Fabrication cost of the above mentioned gate leaf with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge.. |
| 5 | Supply cost of structural steel and rolled steel materials of Steel Hoist Bridge consisting of main beams, chq. plates etc. suitable for vent size of 600mm x 650mm and maximum guide length of about 1600mm for 01 no. of service gate and 01 no. of emergency gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 6 | Fabrication cost of the above mentioned steel hoist bridge with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 7 | Supply cost of structural steel and rolled steel materials of Restraining arrangement of pedestal, gear box frame, main beams, cross beams etc. suitable for vent size of 600mm x 650mm and maximum guide length of about 1600mm for 01 no. of service gate and 01 no. of emergency gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 8 | Fabrication cost of structural steel and rolled steel materials of Restraining arrangement of pedestal, gear box frame, main beams, cross beams etc. suitable for vent size of 600mm x 650mm and maximum guide length of about 1600mm for 01 no. of service gate and 01 no. of emergency gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 9 | Supply cost of steel materials for railing and platform |
| 10 | Supply cost of G.I materias for railing and platform |
| 11 | Fabrication cost of steel and G.I materials for railing and platform |
| 12 | Erection, positioning, aligning, fixing, trial and commissioning including unloading and shifting upto location of all components 1st. Stage and 2nd. Stagge embedded parts, vertical gate leaf, steel hoist bridge assembly, platform and railing with all accessories including machinery, labour, fixture, cutting, aligning, welding, cleaning, finishing complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 13 | Painting cost of embedded parts including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 14 | Painting cost of gate leaf including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 15 | Painting cost of steel hoist bridge, Restraining arrangement, railing and platform including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification with all lead and lift complete in all respects for smooth operation as per specification and direction of engineer-in-charge. |
| 16 | 80mmX30mmX12mm |
| 17 | Side Seal Ø 32mm x10mm th- 80mm width Rubber seal IS : 11855 |
| 18 | Top Seal Ø 32mm x10mm th- 80mm width Rubber seal IS : 11856 |
| 19 | Bottom Rubber seal ( flat type bottom seal of size 75mm x 10mm) IS : 11855 |
| 20 | 2nd stage embedments, Ø16 Studs, bolts, nuts, washers & nut, bolt required for mounting rubber seal etc. |
| 21 | Nut type Screw Gear box assembly suitably square threaded for 80mm dia screw rod all inclusive of cost of material, cost of Thrust bearing, machining and assembly charges. |
| 22 | Anchor bars |
| 23 | Anchoring adhesive |
| 24 | Lifting pin dia 30mm & length 140mm - 45C8 of IS : 1570 (PART II) |
| 25 | Dia 80mm Screw Rod suitably square threaded to M78 x 10 all inclusive of cost of material, straightening and machining. |
| 26 | Dia 80mm plain Stem Rod all inclusive of cost of material, straightening etc. |
| 27 | Restraining arrangement bush ID 80mm thickness 10mm & length 200mm Aluminium bronze all inclusive of material, machining as required & as specified in drawing. |
| 28 | Restraining arrangement MS bush clamp ID 100mm length 200mm all inclusive of material, machining as required & as specified in drawing. |
| 29 | Lubricant like grease & mobil |
| 30 | Stainless steel |
| 31 | Gate Lifting Handle |
| 32 | 2nd. Stage concreting |
| 33 | Construction of coffer dam by sand bag and dismantling after completion of work cost of labour, sand bags etc. |
| 34 | Watch and ward at site for erection and cost of dewatering,Labour charges for vent & site cleaning, including dismantling of existing guide, concrete cutting, chiseling to accommodate the emebeded parts |
| 35 | Transportation charges with labour charges for loading and unloading in a 10T truck to about 110kms. Please Enable Macros to View BoQ information |
