Tender For Certain Repair / Maintenance B/R Wks Under Age B/R-I At Ge Babina
Tender Value
99 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
16 days left
EMD
1.74 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repair / Maintenance B/R Wks Under Age B/R-I At Ge Babina
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises site and complete all as specified and as directed. |
| 2 | M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 3 | M&L for 8-10mm thick vitrified ceramic colour tiles light shade (Square/ rectangular) polished, area of each tiles not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. |
| 4 | Ditto all as above items above but as in vertical surface such as skirting, dados, steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed plaster 10mm thick in CM (1:4) on stone masonry surfaces complete all as specified and directed. |
| 5 | M & L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), , complete all as specified and directed. |
| 6 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and directed. |
| 7 | M&L glazed ceramic coloured tiles, size 350x 250x 7 mm /450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 8 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete. |
| 9 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) in any position and removing material from site complete all as specified and as directed |
| 10 | M&L Machine cut kota stone slab flooring 18-22mm thick (550 x 550 mm mirror polished laid) over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed |
| 11 | M & L Machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting, dado & pillar over and including 15mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 12 | M&L Providing and laying parking tiles of sizes (300X300 or 400X400) of 20-22 mm thickness conforming to IS 15622 in all colors and shades in outdoor floors and skirting meant for parking of cars and trucks, grouting the 3 mm width joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade including filling/grouting and finishing set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed. |
| 13 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 14 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (20mm graded stone aggregate) as in plinth protection laid in panels finished even and smooth without using extra cement complete all as specified |
| 15 | M&L PCC 1:2:4 Type B-1, 40 mm thick using 20 mm graded stone aggregate a in base for flooring complete all as spd |
| 16 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid dry over and including 50mm thick river sand cushion complete all as specified and as directed. |
| 17 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid dry over and including 50mm thick river sand cushion complete all as specified and as directed. |
| 18 | Demolition of brick work built in cement mortar and removing rubbish from site complete all as specified and directed |
| 19 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 20 | M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) but except Bricks etc complete all as specified and as directed |
| 21 | M & L for Brick work with flyash bricks,modular, straight or curved on plan to any radius in half brick thick walls, built in CM 1: 3 complete all as specified and directed. |
| 22 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc and removing rubbish from site complete all as specified and directed. |
| 23 | M&L for rendering 10mm thick in CM 1:6 on fair faces of wall even and fair finish without using extra cement on conc/brick surfaces, complete all as specified and as directed |
| 24 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and fair with out using extra cment complete all as specified and as directed. |
| 25 | M&L for rendering 15mm thick on fair faces of wall even and fair finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed |
| 26 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 27 | M & L for applying one coat of wall care putty 2mm thick to achive smooth / fair surface complete all as specified. |
| 28 | M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD (acrylic) over a coat of primer complete all as specified and as directed. |
| 29 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed. |
| 30 | M & L for preparing new plastered surfaces of walls and applying three coats of white wash.on wall complete all as specified and directed. |
| 31 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for the following sizes:- |
| 32 | (a) 15 mm dia bore |
| 33 | (b) 20 mm dia bore |
| 34 | Supplying and laying of CPVC pipes pittings in trenches/wall complete all as specified. with all fitting SDR-II d ,plain cpvc SDR -II such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor with clamp complete all as specified and as directed for the following sizes:- |
| 35 | (a) 16 mm dia bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 36 | (b) 20 mm dia bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 37 | Fixing only old steel tubing and connections obtained from taking down against item No 8(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new GI fittings for the following sizes:- |
| 38 | (a) 15mm dia bore |
| 39 | (b) 20mm dia bore |
| 40 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed |
| 41 | S&F in repair rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling tank existing complete all as specified and as directed. |
| 42 | Fixing only old rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling tank existing complete all as specified and as directed. |
| 43 | S&F in repair 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling tank existing complete all as specified and as directed. |
| 44 | Fixing only old1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling tank existing complete all as specified and as directed. |
| 45 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed |
| 46 | S & F in repair 20 mm ball valve high pressure of brass valves with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 47 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 48 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 49 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 50 | Taking down door & shutter of 1.00 sqm and not exceeding 2.00 sqm in each and removing from site complete all as specified and directed |
| 51 | S&F factory madeFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as per direction. |
| 52 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and as directed. |
| 53 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed |
| 54 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed |
| 55 | S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete. |
| 56 | S & f of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) complete all as specified and as directed. |
| 57 | S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete. |
| 58 | S&F Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete. |
| 59 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 60 | M & L second class hardwood Plain, solid, straight as in door chowkats and frames wrought framed rebated one or both ends on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed. |
| 61 | S & F Flush door shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed. |
| 62 | S&F factory made fabricated 30 mm thick Ist class SW glazed & skeleton door shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed |
| 63 | S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.. |
| 64 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 65 | S&F galvanized mild steel wire cloth 0.36 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed |
| 66 | S & F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd. |
| 67 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 68 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 69 | M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 70 | M&L, aluminium powder coated/Anodised aluminium frame for doors, windows, ventilators,partitions with one or more rebates including joining cleat for fixing etc. complete all as specified Please Enable Macros to View BoQ information |
| 71 | M&L, aluminium powder coated/Anodised aluminium frame for doors, windows, ventilators,partitions with one or more rebates including joining cleat for fixing etc. complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender