Tender For Special Repairs To Bldg No. P-01 (Qtr No 01 To 08 S F Accn ) At Vnc Under Ge (Central) Bangalore.
Tender Value
61.80 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No. P-01 (Qtr No 01 To 08 S F Accn ) At Vnc Under Ge (Central) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on Brick / Concrete / Stone masonry surfaces including raking out joints, hacking for key scrubbing down with water and removing rubbish of the defence land all as specified & as directed. |
| 2 | M&L for Rendering 20 mm thick cement mortar (1:4) on brick / concrete surfaces mixed with WPC,Surfaces finished even & smooth without using extra cement including necessary scaffolding complete all as specified and as directed. (Note : WPC will be measured and paid separately) |
| 3 | M&L for rendering 15mm thick cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed. |
| 4 | M & L for Brushing neat cement slurry @ 3.0kg of cement per sq. metre, including cleaning of rusted steel particles of reinforcement complete all as specified and as directed. |
| 5 | M&L for rendering 10mm thick cement mortar (1:3) on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement including necessary scaffolding complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 7 | Demolition of un-reinforced cement concrete in floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc., including removal of debris outside defence land complete all as specified and as directed. |
| 9 | M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in 75 mm thick sub base to flooring complete all as specified and as directed. |
| 10 | M&L for Plain cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in 25 mm thick sub base to receive floor finishes complete all as specified and as directed. |
| 11 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed 15mm thick cement mortar (1:6) including roughening of floor to receiving tiles complete all as specified and as directed. |
| 12 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including backing coat 10 mm thick cement mortar (1:4) complete all as specified and as directed. |
| 13 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed 15mm thick cement mortar (1:6) complete all as specified and as directed. |
| 14 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm / 450 x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed. |
| 15 | M&L for Granite stone slab 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including screed bed 15 mm thick CM (1:6) and rounding to edges complete all as specified and as directed. |
| 16 | M&L for Sadarhalli stone slab 18-20mm thick in flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including screed bed 15 mm thick CM (1:4) and rounding to edges complete all as specified and as directed. |
| 17 | M&L for Sadarhalli stone slab 18-20mm thick in skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including backing coat 10 mm thick CM (1:3) complete all as specified and as directed. |
| 18 | M&L for Treating anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 19 | M&L for Plain Cement Concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in 75 mm thick plinth protection finshed the concrete surface fair & even without using extra cement including making joints complete all as specified and as directed. |
| 20 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 21 | M&L for precast cement concrete (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in solid block masonry exc 10 cm width and setting in cement mortar (1:6) complete all as specified and as directed. |
| 22 | M&L for precast cement concrete (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in solid block masonry not exc 10 cm width and setting in cement mortar (1:4) complete all as specified and as directed. |
| 23 | Taking down Chowkhats or frames without taking off shutters from the frames area not exc. 1.5 sq. m each including making good the disturbed surface complete all as specified and as directed. |
| 24 | Taking down Chowkhats or frames without taking off shutters from the frames area exc. 1.5 sq. m but not exc 4sqm each including making good the disturbed surface complete all as specified and as directed. |
| 25 | S&F Pressed steel frames for door profile size 125x60 mm, made with 0.63mm thick M S sheets, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 26 | S&F Pressed steel frames for door profile size 105x60 mm, made with 0.63mm thick M S sheets, one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 27 | M&L for Plain Cement Concrete (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in filling of chowkats etc complete all as specified and directed. |
| 28 | S&F Flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 29 | S&F Second class hard wood Glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etcsizes of members of shutters as specified in SSR in SSR Part I, section 8, clause 8.24(b); supply and fixed to chowkats complete all as specified and as directed. |
| 30 | S&F Powder coated aluminium sliding windows, three way, frame & shutter with two glazed shutters and one wiremesh shutter with following sections complete all as specified & as directed :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Hold fast in walls fixed in PCC (1:3:6) type C-i block including making good distributed surfaces to match with adjoining surface(v) Glass 4mm thick ordinary quality fixed with rubber gasket for glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for gauzed shutter etc.(vii) Aluminium disc /bow hanle and locking system complete |
| 31 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm.(ii) Hold fast fixed in walls with PCC (1:3:6) type C-1 including making good distributed surfaces to match with adjoining surfaces.(v) Frosted glass 4mm thick (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket etc. |
| 32 | S&F PVC solid door frame of size 50mm x 47 mm made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification complete all as specified and directed. |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification complete all as specified and as directed. |
| 34 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 35 | S&F Plain, solid, straight second class hard wood frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 36 | S&F Medium Density Fiber board (MDF Board) 19mm thick, both side finished as in wardrobe, devided in No. of compartments & drawers including fixing to any type of frame / wall complete all as specified and as directed. |
| 37 | S&F Continuous (piano) hinges, mild steel bright finish or electrogalvanised of width of flaps 30 mm (when open) complete all as specified and directed. |
| 38 | M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in sub base to floor complete all as specified and directed. |
| 39 | S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to conforming to Fe-290 GdeE-165 complete all as specified and as directed. |
| 40 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 41 | S&F Butt hinges 100mm long 2.5mm thick stainless steel 202 grade, complete all as specified and as directed. |
| 42 | S&F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and as directed. |
| 43 | S&F extruded aluminium alloy handles 150mmsize, fabricated type, anodised complete all as specified and as directed. |
| 44 | S & F Butt hinge 75 mm size extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and as directed. |
| 45 | S&F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and as directed. |
| 46 | S&F extruded aluminium alloy handles 100mm size, fabricated type, anodised complete all as specified and as directed. |
| 47 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed. |
| 48 | S&F Hasp and staple 100mm size, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 49 | S&F Magic Eye 15mm dia, stainless steel made complete all as specified and as directed. |
| 50 | S&F MS ordinary rat tail rod pattern spring including roller and roller plate, 300mm long complete all as specified & as directed. |
| 51 | M&L for Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 52 | S&F in repair Aluminium anodised powder coated curtain Rod 20mm dia of approved quality including fancy finale caps cap etc complete all as specified and as directed. |
| 53 | S&F in repair brackets suitable for decorative type aluminium curtain rod of approved quality complete all as specified and as directed. |
| 54 | S&F in repair Rotational moulded polyetylene water storage tank of capacity 1000 litres (cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part-I with following accessories complete all as specified and as directed :-(i) Tank adaptor(ii) Gun-Metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm dia (iii) Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for pipe 25mm dia |
| 55 | Taking up or down steel water tubing and connections 15 mm dia bore complete all as specified and as directed. |
| 56 | Taking up or down steel water tubing and connections 20 mm bore complete all as specified and as directed. |
| 57 | S&F CPVC Pipe 20mm outer dia (ISI Marked) SDR 11 & plain CPVC SDR 11 fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 58 | S&F CPVC Pipe 25m outer dia (ISI Marked) SDR 11 & plain CPVC SDR 11 fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 59 | S&F in repairs Stainless Steel ( conforming to AISI -304 grade) Kitchen Sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling 32mm dia including ball and chain 300mm long with brass cap rubber plug, PVC waste pipe 32mm bore (heavy duty ) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets complete all as specified and as directed. |
| 60 | S&F in Repair Sink Cock with flange, brass chromium plated, Wall Mounted, fixed to 15mm dia bore pipe complete all as specified & as directed. (Make:- Prayag Cat No 8316 or equivalent make in Jaquar / Kohler) as approved by GE |
| 61 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400 mm including a pair of cast iron cantilever brackets of size 40 x 40 x 5 mm with and including PVC waste coupling 32 mm dia of PTMT (half or full threaded), waste pipe low density polyethylene pipe 32mm dia bore complete all as specified and as directed. |
| 62 | M & L for Machine pressed precast concrete interlocking paver block 60mm thick, M-35 grade of any shape and size with grey cement and pigment confirming to IS 15658-2006 all as specified and as directed. |
| 63 | S & F in repair PVC flushing cistern 10 litres capacity, white low level valveless, symphonic action type with inlet, ball valve, float and handle, brackets, including cutting and pinning in ends, making good to disturbed surfaces in cement mortar (1:3) and fixed including taking down/out unserviceable flushing cistern and connected items complete all as specified and as directed. |
| 64 | S&F in repairs PVC Connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 65 | S&F in repair 15mm bore Pillar taps cast copper alloy, with capstan heads chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts fixed to pipes 15mm dia complete all as specified and as directed. |
| 66 | S&F in repairs 15mm bore Bib tap chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe 15mm dia or for union complete all as specified and as directed. |
| 67 | S&F in repairs 15mm dia Bib tap Quarter turn fancy type, brass chromium plated 2 in 1 with crutch or butterfly handle screwed down, screwed for iron pipe 15mm dia or for union complete all as specified and as directed. |
| 68 | S&F in Repair 15mm dia Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends fixed to pipes 15mm dia bore complete all as specified and as directed. |
| 69 | M&L for Sand cushion with clean river sand /M-sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over Sub base complete all as specified and as directed. |
| 70 | S&F in repairs Tubular towel rail, brass chromium plated, 20mm dia ‘D’ type, 60CM long between flanges fixed on walls complete all as specified and as directed. |
| 71 | S&F in repairs Health faucet, brass chromium plated along with 1 m long flexible tube and holding stand including all necessary fittings complete all as specified and as directed |
| 72 | S&F in repairs Soap dish 15mm dia brass chromium plated, fixed to wall with chromium plated brass screws complete all as specified and as directed.(Make : Prayag cat No BA-45 or equivalent make specified in P S herein after) as approved by GE |
| 73 | S & F in repair Bevelled edge mirror of size 600mm x 450mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 74 | M&L for Preparation of newly plastered ceiling surface of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash including necessary scaffolding complete all as specified and as directed. |
| 75 | M&L for Preparation of newly plastered wall surfaces and finishing as per following specification complete all as specified and as directed :-(i) applying Wall care putty 1mm thick finished to smooth surfaces (ii) applying a coat of alkali resistant primer(iii) applying two coats of Acrylic distemper |
| 76 | M&L for Preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion weather proof exterior paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior weather proof grade primer applied @ 0.90 litre / 10 sqm necessary scaffolding complete all as specified and as directed. |
| 77 | M&L for Complete removal of existing treatment of wall surface till visible of original plastered surface and applying two coats of 100% Premium acrylic emulsion weather proof exterior paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior weather proof grade primer applied @ 0.90 litre / 10 sqm including necessary scaffolding complete all as specified and as directed. |
| 78 | M&L for Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface and finishing as per following specification complete all as specified and as directed :-(i) applying Wall care putty 1mm thick finished to smooth surfaces (ii) applying a coat of alkali resistant primer(iii) applying two coats of Acrylic distemper |
| 79 | M&L for Preparation of Old decorated / treated ceiling surface and applying two coats of white wash including necessary scaffolding complete all as specified and as directed. |
| 80 | M&L for Preparation of new wood or wood based surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 81 | S & F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with steel grating including jointing with solvent cement etc complete complete all as specified and as directed. |
| 82 | S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 83 | S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 86 | S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 87 | S&F PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 88 | S&F PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 89 | S&F PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 90 | S&F PVC (SWR) vent cowl 110mm dia bore complete all as specified and as directed. |
| 91 | S&F PVC (SWR) vent cowl 75mm dia bore complete all as specified and as directed. |
| 92 | S&F in repairs Grating of 100mm dia With or Without Waste Hole, Chromium Plated Steel complete all as specified and as directed. |
| 93 | Demolition of un-reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar work complete all as specified and directed. |
| 94 | M&L for PCC (1:2:4) type B-0 using 12.5mm grades crushed stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement complete all as specified and as directed. |
| 95 | M&L for Rendering 10mm thick in cement mortar (1:3) on brick work or concrete surface finished even and smooth without using extracement including mixing WPC complete all as specified and as directed.(Note : WPC shall be measured and paid seperately under respetive item.) |
| 96 | M&L for water proofing treatment over roof surfaces all as per following specification complete all as specified and as directed :-(i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make the surface smooth(ii) Applying compatible oil bound bitumen primer @ 0.30 Kg/Sqm (iii) Laying 3 mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N /sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap.(iii) Applying solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm.(iv) Pond test for 72 hours shall be carried out for dampness / leakage test. |
| 97 | Supply only Liquid Integral waterproofing compound complete all as specified and as directed. |
| 98 | M&L for mildsteel TMT bars 10mm dia and over cut to length, bend to shape required including cranking, hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 99 | S&F magnetic catcher stainless steel and strike plate fixed complete all as specified and as directed. |
| 100 | S & F in repairs Clothes drying system kit of 4 pipes 5 feet long pulley operated consisting of aluminium pipes each of outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24\\" (distance between two pipes is adjustable). Locking system to hide rope knot, channel to be mounted or fixed with self tapping screws, HDPE double core of 4mm dia rope complete all as specified and as directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 102 | S&F in repairs Stainless steel plate rack of size 900mm x 900mm x 250mm, made with S S sheet 0.63mm thick, fixed with rawl plug and screws on walls complete all as specified and as directed. |
| 103 | S&F 15mm dia Wall mixer for mixing hot and cold water with provision of over head shower, brass chromium plated screwed down for iron pipe 15mm dia bore complete all as specified and as directed. |
| 104 | M&L Cutting/chipping the sapling from stone / concrete of columns, beams, facias, slabs, Chajjas & cartilevers surfaces etc., area n.exc 1.00 Sqm , and trimming cleaning the surfaces of any thickness and finishing with following specification including necessary scaffolding as required at site complete all as specified & as directed :-(i) applying one coat of notozinc primer to the exposed reinforcement area (ii) Applying epoxy treatment for bonding old chipped concrete surfaces(iii) Plastering in cement mortar (1:4) average 20mm thick finishied even and smooth without using extra cement to level the surface |
| 105 | Material & Labour for Stainless steel grade 304 as in railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed . |
| 106 | S&F Towel ring of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats, washers complete all as specified and as directed (minimum weight 90 gms). |
| 107 | M & L for water proofing treatment to sunken floor slab with the following specifications complete all as specified & as directed :-(i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chieselled out any mortar sticking to the surface and brooming / washing completely. (ii) Laying 40 mm average thickness PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in concrete padding to achieve proper slope including fixing 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth.(iii) Rendering of uneven surfaces with 10 mm thick in CM (1:4) mixed with integral water proofing compound UltraTech WP+ 200 or other equivalent etc finished even & smooth.(iv) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty properly (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear (iv) Ponding test by filling with water and check dampness and seepage. Where dampness and seepage noticed nozzles shall be fixed and grouting carried out. Please Enable Macros to View BoQ information |
| 108 | M & L for water proofing treatment to sunken floor slab with the following specifications complete all as specified & as directed :-(i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chieselled out any mortar sticking to the surface and brooming / washing completely. (ii) Laying 40 mm average thickness PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in concrete padding to achieve proper slope including fixing 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth.(iii) Rendering of uneven surfaces with 10 mm thick in CM (1:4) mixed with integral water proofing compound UltraTech WP+ 200 or other equivalent etc finished even & smooth.(iv) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty properly (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear (iv) Ponding test by filling with water and check dampness and seepage. Where dampness and seepage noticed nozzles shall be fixed and grouting carried out. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender