Tender For Special Repair To Bldg No. P-48 (Qtr No.1 To 6) At Vnc Under Ge (Central) Bangalore.
Tender Value
55.60 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. P-48 (Qtr No.1 To 6) At Vnc Under Ge (Central) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster from Brick / Concrete surfaces including raking out joints, hacking for key, scrubbing down with water and removing rubbish off the MD Land all as specified & directed. |
| 2 | M&L for Rendering 20 mm thick on external brick / stone masonary surfaces other than fair face of brickwork or on one side of lathing in CM 1:4 mixed with WPC, finished even & smooth without using extra cement including necessary scaffolding complete all as specified and as directed.(Note : WPC will be measured seperately) |
| 3 | M&L for rendering 15mm thick cement mortar (1:6) on brick / stone masonary wall surfaces, finished even & smooth without using extra cement on internal surfaces complete all as specified and as directed. |
| 4 | M&L for cleaning of rusted steel surfaces including reinforcement and brushing neat cement slurry @ 3 kg of cement per sq. metre complete all as specified and directed. |
| 5 | M&L for rendering 10mm thick CM (1:3) on fair face of brick work or concrete surfaces of ceiling finished even & smooth without using extra cement including necessary scaffolding complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | Demolition of un-reinforced cement concrete in floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc. including removal of debris outside MD land complete all as specified and as directed. |
| 9 | M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in 75 mm thick sub base flooring complete all as specified and as directed. |
| 10 | M&L for Plain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in 25 mm thick sub base to receive floor finishes complete all as specified and directed. |
| 11 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including roughening of existing floor to receive tiles complete all as specified and as directed. |
| 12 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc., set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including backing coat 10 mm thick cement mortar (1:4) complete all as specified and as directed. |
| 13 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 14 | M&L Glazed coloured ceramic tiles of size 350x 250x 7 / 450x 350x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick backing coat in M (1:4) complete all as specified and as directed. |
| 15 | M&L for Granite slab 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in CM (1:6) and rounding to edges complete all as specified and as directed. |
| 16 | M&L for Sadarhalli stone slab 18-20mm thick as in flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in CM (1:4) and Rounding to edges complete all as specified and as directed. |
| 17 | M&L for Sadarhalli stone slab 18-20mm thick as in skirting, riser, dado and like jointing in cm (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 10 mm thick backing coat in CM (1:3) all as complete all as specified and as directed. |
| 18 | M&L for Anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per running metre of the perimeter wall complete all as specified and as directed. |
| 19 | M&L for Plain Cement Concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in 75 mm thick Plinth protection finshed the concrete surface even and smooth without using extra cement including joint filling joint sealing compound grade A, complete all as specified and as directed. |
| 20 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 21 | M&L for precast cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in solid block masonry exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 22 | M&L for Precast cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in solid block masonry not exc 10 cm in width and setting in cement mortar (1:4) complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters, without taking off shutters from the frames, area not exc 1.5 Sqm each including making good the disturbed surface complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters, without taking off shutters from the frames, area exc 1.5 Sqm but not exc 4 sqm each including making good the disturbed surface complete all as specified and directed. |
| 25 | S&F Pressed steel frames for door of profile size 125x60 mm with one or more rebates, using 1.25mm thick M S sheets including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 26 | S&F Pressed steel frames for door of profile size 105x60 mm with one or more rebates, using 1.25mm thick M S sheets including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 27 | M&L for PCC (1:3:6) type B0 using 12.50mm graded aggregate as in filling of chowkats including necessary formwork etc complete all as specified and directed. |
| 28 | S&F Flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 29 | S&F Glazed and skeleton shutters 30 mm thick, Second class hard wood for windows and doors open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etcsizes of members of shutters as specified in SSR in SSR Part I, section 8, clause 8.24(b); supply and fixed to chowkats complete all as specified and directed. |
| 30 | S&F Powder coated aluminium sliding window, three way, frame & shutter with two glazed shutter and one wiremesh /skeleton shutter with the following details all as specified & directed :-(i) Aluminium frame section 116 x36.50 x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements lugs / hold fast in walls with PCC (1:3:6) including making goog distributed surfaces to match with adjoining surfaces (v) Glass 4mm thick ordinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia average width of aperature 1.14mm and fixed with rubber gasket for gauzed shutter.(vii) Aluminium disc /bow hanle and locking system complete |
| 31 | S&F Powder coated aluminium Ventilator, partially fixed glazing and Partially louvered glazing with the following details all as specified & directed :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements lugs / hold fast in walls including PCC (1:3:6) type C-1 making goog distributed surfaces to match with adjoining surfaces.(v) Frosted glass 4mm thick ordinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket. |
| 32 | S&F PVC solid door frame of size 50mm x 47 mm, made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification complete all as specified and directed. |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification complete all as specified and directed. |
| 34 | Dismantling boarding including frame work, any description, fixed in any position with nails complete all as specified and directed. |
| 35 | M & L for Plain, solid, straight second class hard wood frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 36 | M & L for MDF Board 19mm thick both side finished as in wardrobe, compartments & Drawers including fixing to any type of frame / wall all as specified and as directed. |
| 37 | S&F Continuous piano type hinges, mild steel bright finish or electrogalvanised of width of flaps 30 mm (when open) complete all as specified and directed. |
| 38 | M&L for Cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 39 | S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 40 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 41 | S&F Butt hinges 100mm size, 2.5mm thick stainless steel 202 grade, complete all as specified and as directed. |
| 42 | S&F Aluminium anodised barrel tower bolts 150 mm long, extruded section and fixed complete all as specified and directed. |
| 43 | S&F Extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed. |
| 44 | S & F Butt hinges 75 mm size extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed. |
| 45 | S&F Aluminium anodised barrel tower bolts 100 mm long, extruded section and fixed complete all as specified and directed. |
| 46 | S&F Extruded aluminium alloy handles 100mm size, fabricated type, anodised complete all as specified and directed. |
| 47 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 48 | S&F Hasp and staple 100mm size, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 49 | S&F Magic Eye 15mm dia, brass body complete all as specified and directed. |
| 50 | S&F Mild steel ordinary rat tail rod pattern spring 300mm long including roller and roller plate complete all as specified & directed. |
| 51 | M&L for Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed. |
| 52 | S&F in repair aluminium anodised Powder coated Curtain Rod 20mm dia of approved quality including fancy finale caps cap etc., all as specified & directed. |
| 53 | S&F in repair brackets decorative type suitable for aluminium curtain rod 20mm dia, made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with rawl plug of size not less than 50 mm long etc complete all as specified and as directed |
| 54 | S&F Rotational moulded polyetylene water storage tank of capacity 1000 litres (cylindrical vertical with closed top) three layered, hoisted and fixed in position all as specified in SSR Part-I with tank adaptor, Gun-Metal , globe or gate valves of 25 mm dia , with iron wheel head, screwed both ends for iron pipe and fixed and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for pipe and fixed including dismantling old tanks all as speciifed and as directed . |
| 55 | Taking up or down steel water tubing and connections 15 mm dia bore complete all as specified and as directed. |
| 56 | Taking up or down steel water tubing and connections 20 mm dia bore complete all as specified and as directed. |
| 57 | S&F CPVC Pipe 20m outer dia (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 58 | S&F CPVC Pipe 25m outer dia (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 59 | S&F in repairs Stainless Steel ( conforming to AISI -304 grade) Kitchen Sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement morter and fixed on CP cantilever brackets complete all as specified & directed. |
| 60 | S&F in Repair Sink Cock with flange, brass chromium plated, Wall Mounted, fixed to 15mm dia bore pipe all as specified & directed. (Make:- Prayag Cat No 8316 or equivalent make in Jaquar / Kohler) |
| 61 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400 mm including a pair of cast iron cantilever brackets of size 40 x 40 x 5 mm with and including 32 mm dia PVC waste coupling of PTMT (half or full threaded), waste pipe low density polyethylene pipe 32mm bore complete all as specified and directed. |
| 62 | M & L for Machine pressed precast concrete interlocking paver block 60mm thick, M-35 grade of any shape and size block with grey cement and pigment confirming to IS 15658-2006 all as specified and as directed. |
| 63 | S & F in repair PVC flushing cistern 10 litres capacity, white low level valveless, symphonic action type with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32 mm dia, handle and including cutting and pinning in ends, making good to disturbed surfaces in cement mortar 1:3 and fixed complete all as specified and directed. |
| 64 | S&F in repairs PVC Connection 15mm dia 450mm long with PTMT nuts complete all as specified and as directed. |
| 65 | S&F Pillar taps cast copper alloy, with capstan heads chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed shank and fly niuts, fixed to 15mm dia bore pipes complete all as specified and directed. |
| 66 | S&F in repairs Bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe 15mm dia bore or for union complete all as specified and directed. |
| 67 | S&F in repairs Bib cock two way with angle valve combination, brass chromium plated, fixed to iron pipe 15mm dia complete all as specified and directed. |
| 68 | S&F in repair Stop valves / Angle Cock fancy type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, fixed to pipe 15mm dia bore complete all as specified and as directed. |
| 69 | M&L for sand cushion with M-sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over Sub base complete all as specified and directed. |
| 70 | S&F in repairs tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, brass chromium plated complete all as specified and as directed. |
| 71 | S&F in repairs health faucet brass chromium plated along with 1 m long flexible tube and holding stand including all necessary fittings complete all as specified and as directed |
| 72 | S&F in repairs Soap dish 150mm, brass chromium plated, fixed to wall with chromium plated brass screws complete all as specified and as directed. |
| 73 | S & F bevelled edge mirror if size 600mm x 450mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | M&L for Preparation of newly plastered ceiling surface of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash including necessary scaffolding complete all as specified and directed. |
| 75 | M&L for Preparation of newly plastered surfaces of wall and finishing as per following specification all as specified and directed :-(i) Applying 1mm thick Wall care putty finished to smooth surface.(ii) Applying a coat of alkali resistant primer(iii) Applying two coats of Acrylic emulsion distemper |
| 76 | M&L for Preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion exterior weather proof paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm including necessary scaffolding complete all as specified and as directed. |
| 77 | M & L for Complete removal of existing treatment upto plastering surface visible & making surface smooth using sand paper and applying two coats of 100% Premium acrylic emulsion exterior weather proof paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm including necessary scaffolding complete all as specified and as directed. |
| 78 | M &n L for Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface and finishing as per following specification all as specified and directed :-(i) Applying 1mm thick Wall care putty finished to smooth surface.(ii) Applying a coat of alkali resistant primer(iii) Applying two coats of Acrylic emulsion distemper |
| 79 | M&L for Preparation of Old decorated ceiling surface and applying two coats of white wash including necessary scaffolding complete and as directed. |
| 80 | M&L Preparation of new wood or wood based surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 81 | S & F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with stainless steel grating including jointing with solvent cement etc complete all as specified and as directed. |
| 82 | S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 83 | S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 86 | S&F PVC (SWR) junction single (Single T) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 87 | S&F PVC (SWR) junction single (Single T) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 88 | S&F PVC (SWR) branch piece (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 89 | S&F PVC (SWR) branch piece (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 90 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 91 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 92 | S&F in repairs Chromium Plated Steel Grating of 100mm dia With or without waste hole complete all as specified and as directed. |
| 93 | Demolition of un-reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar work complete all as specified and directed. |
| 94 | M&L for PCC (1:2:4) type B-0 using 12.5mm grades stone aggregate as in padding over roof / chajja finished even and smooth without using extra cement complete all as specified and as directed. |
| 95 | M&L for Rendering 10mm thick cement mortar (1:3) on brick work or concrete surface finished even and smooth without using extra cement including mixing WPC complete all as specified and as directed.(Note : WPC measured and paid seperately). |
| 96 | M&L for Water proofing treatment to RCC roof surfaces with following specification complete all as specified & directed :- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make the surface smooth(ii) Applying compatible oil bound bitumen primer @ 0.30 Kg/Sqm (iii) Laying 3 mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N /sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap.(iii) Applying a coat of blown grade hot bitumen 85/25 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm (iv) Ponding test be carried out for 72hours for seepage /leakage. |
| 97 | Supply only Integral waterproofing compound, ISI marked, complete all as specified and directed. |
| 98 | M&L for mildsteel TMT bars 10mm dia and over cut to length bend to shape required including cranking hooping ends, bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 99 | S&F magnetic catcher with brass body and strike plate including letting in and fixed complete all as specified and directed. |
| 100 | S & F in repairs clothes drying system 5 feet long, pulley operated kit of 4 pipes consisting of aluminium pipes each of outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24\\" (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws, rope with HDPE double core of 4mm dia complete all as specified and as directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 102 | S&F in repairs Stainless steel plate rack of overall size 900mm x 900mm x 250mm, made with 0.63mm stainless steel sheet including fixing with rawl plug and screws on walls complete all as specified and directed. |
| 103 | S&F Wall mixer for mixing hot and cold water, \\"L\\" Bend with Wall Flange, brass chromium plated, Provision for Over Head Shower, screwed down for iron pipe 15mm dia bore and fixed complete all as specified & directed. |
| 104 | M & L for Cutting/chipping the sapling from concrete surfaces of columns, beams, facias, slabs, Chajjas & cantilevers etc., and trimming cleaning the surfaces of any thickness and applying epoxy treatment for bonding old demolished concrete surfaces with application of one coat of notozinc primer to the exposed reinforcement and plastering 20mm average thick in CM (1:4) finishied even and smooth without using extra cement to make level the surface etc including necessary scafolding as required at site complete all as specified and directed |
| 105 | Material & Labour for providing and fixing stainless steel Grade 304 railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed . |
| 106 | S&F Towel ring of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats (minimum weight 90 gms) washers etc., complete all as specified and as directed . |
| 107 | M & L for Treatment of sunken floor slab with following specifications all as specified & directed :-(i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely and laying 40 mm average thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on outside mouth to be fixed.(ii) Rendering of uneven surfaces with 10 mm thick CM (1:4) mixed with integral water proofing compound of UltraTech WP+ 200 or other equivalent make etc complete fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting shall be carried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear |
| 108 | (v) Material and labour for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall not be less than 1 mm. When the second layer is still sticky, coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound @3% wt of cment consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. Note :- (i) WPC shall be measured & paid separately (ii) Ponding test shall be carried out by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE.Cost of testing is deemed to be included in the rates quoted.(iii) The treatment shall be carried out by authorised applicators of chemicals. (vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:2:4 all around after painting with anticorrossive black japan paint |
| 109 | M&L for Plain Cement concrete (1:5:10) type E2 using 40 mm graded stone aggregate filling in sunken slab and mass concrete complete all as specified and directed. |
| 110 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for all as spcified and directed. |
| 111 | M&L for Preparation of new plastered wall surface and applying Wall care putty 1mm thick thereafter two coats of white wash including necessary scaffolding complete all as specified & directed. |
| 112 | M&L for PVC ply both sides plain 18 mm thick as in kitchen cupboard / cupboards including stainless steel hinges, handles, S S screws etc instructions including fixing to wall or any type of frame complete all as specified and directed. |
| 113 | Cutting holes in stone / brick walls built in cement mortar exceeding half brick but not exceeding one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete (1:2:4) type B1 all as specified and as directed. |
| 114 | S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm, fixed in floor all as specified and as directed. |
| 115 | M&L for contraction joints (dummy Joints) 65 mm deep x 10 mm deep wide filled sealing compound grade 'A' complete all as specified and as directed . |
| 116 | S&F in repairs Shower rose, brass chromium plated with or without swivel joints, 125mm dia including fixing to steel pipe 15mm dia or union complete all as specified and as directed . |
| 117 | M&L for Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work includingattached pillasters, buttresses, etc.; vertical or to batter fair finished flat surfaces complete all as specified and as directed . |
| 118 | M&L for Reinforced Cement Concrete M-25 grade using 20mm graded stone aggregate concrete as in wall , parapet or similar items and the like complete all as specified and directed. |
| 119 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide 60 cm long with chromium plated bracket guard and railing all as specified and directed. |
| 120 | Supplying and fixing CPVC pipes 40mm outer dia SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laing in floors (spout) complete all as specified and as directed |
| 121 | S&F in repairs vitreous china wash down water closet pan pedestal pattern (EWC) white with 'P' or 'S' trap, plastic seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to outgoing pipe and to flushing pipe, anti-syphonage pipe etc., including making good to the floor complete all as specified and as directed. |
| 122 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., and making good distrubed surfaces of wall, floors, etc complete all as specified and as directed. |
| 123 | M & L for Concealed Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694-1990 drawn in and including PVC rigid non metalic concealed conduit on stone/Brick masonary wall conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity to common earth and connecting to earth dolly all as specified for :- |
| 124 | One light point / Ceiling fan / Exhaust fan point / Bell point controlled by one 5 Amps switch one way |
| 125 | One light point controlled by one 5 Amps switch two way |
| 126 | One 3 pin socket point 5 Amp on independent board |
| 127 | One 3 pin socket point 5 Amp on same board with other switches. |
| 128 | M & L for Concealed Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 2.5 sqmm size, 1100 volts grade cable conforming to IS-694-1990 drawn in and including PVC rigid non metalic concealed conduit on stone/Brick masonary wall conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, etc including 2.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity to common earth and connecting to earth dolly all as specified & directed. |
| 129 | Supply and fix Switch piano, flush button single pole, 5 Amps one way all as specified & directed. |
| 130 | Supply and fix Switch piano, flush button single pole, 5 Amps two way all as specified & directed. |
| 131 | Supply and fix Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose all as specified & directed. |
| 132 | Supply and fix Switch socket combination flush type 6 / 16 Amps 3 / 3 pin, universal type multipurpose all as specified & directed. |
| 133 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan all as specified & directed. |
| 134 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks all as specified & directed. |
| 135 | Supply and fix Door bell electronic, multi music type, 230 volt AC all as specified & directed. |
| 136 | Supply and fix bell Push, flush type, 5 Amp, 230 volt AC all as specified & directed. |
| 137 | S&F LED tube light fitting of 10 watts capacity 6000K, 230 volts, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. |
| 138 | S&F LED tube light fitting of 20 watts capacity 6000K, 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. |
| 139 | S&F building security light light fittings 1x 25 Watt capacity LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. |
| 140 | S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable fixed on steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 141 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board VTPN, 415 volts, 4 way Vertical type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 142 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board, SPN 8 ways, double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & directed. |
| 143 | Supply and fix MCB single pole 6 to 32 Amps, 240 volts, C series, 10 kA rupturing capacity complete all as specified & directed. |
| 144 | Supply and fix MCB single pole & neutral 32 Amps, 240 volts, C series,10 kA rupturing capacity complete all as specified & directed. |
| 145 | Supply and fix MCCB four pole, 100 Amps capacity 415 volts, 16 kA rupturing capacity providing in DB complete all as specified & directed. |
| 146 | Supply and fix in repair Sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn through & including non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note : Three run of 5sqmm cable & one run of conduit pipe altogether measured as one unit) |
| 147 | M&L for taking down, dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault, rewinding if necessary and making the fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing etc, finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing ,re-assembling & testing the fan and fixing on its original position complete all as specified & directed.(Note : Re-winding will be measured & paid seperately) |
| 148 | M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding complete all as specified & directed. Please Enable Macros to View BoQ information |
| 149 | M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender